Help and contact
(0) 
Newsletter
ELFTMANN
AR-9 ADJUSTABLE TRIGGER
ELFTMANN AR-9 TRIGGER CURVED FINGER ADJUSTABLE
Mfr Part: AR9-C FA 616612925916 The ELF AR-9 Trigger has been built for performance. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. Secifically developed for 9mm and .45 PCC platforms, after tens of thousands of rounds of testing in all platforms, the boss has decided this is the best trigger we have ever produced and does it all in every AR platform. It has a u-shaped captured disconnector that forces a positive hold on the hammer and also has a ""pad"" that matches up to an extension on the hammer. The pad is directly in line with the rear trigger pin so when the hammer is stopped by those matching surfaces it effectively eliminates trigger slap from the hammer hitting the disconnector and greatly enhances the feel of the trigger during live fire. Absolutely compatible with the Sig MPX! All our performance series triggers utilize aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero over travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-9 / AR-45 platform, this is the trigger system for you. Features Fits any mil-spec AR Platform Straight or Curved Trigger Available Incremental Adjustable Knob Compatible with Sig MPX which was used extensively in development Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer sealed bearings for smoother and faster firing Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire.
Top takeaways
- The ELF AR-9 Trigger offers adjustable pull weight from 2.75 to 4 lbs, designed specifically for 9mm and .45 PCC platforms, ensuring high performance with a smooth and fast pull.
- Installation is simple and quick, utilizing original AR hammer and trigger pins, and features a unique captured disconnector and anti trigger-slap geometry for enhanced shooting experience.
- Constructed of wire EDM machined hardened A2 tool steel and lightweight aircraft-grade aluminum, the trigger is robust, drop-safe, and provides a short pull and reset for rapid follow-up shots and precision.
Attributes
Make: AR-15 Style: Curved Delivery weight: 0.142kg Shipping height: 25mm Shipping width: 76mm Shipping length: 152mm UPC : 616612925916
Item details
US export classification: 0A501.c
ELFTMANN AR-9 TRIGGER STRAIGHT FINGER ADJUSTABLE
Mfr Part: AR9-S FA 616612925923 The ELF AR-9 Trigger has been built for performance. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. Secifically developed for 9mm and .45 PCC platforms, after tens of thousands of rounds of testing in all platforms, the boss has decided this is the best trigger we have ever produced and does it all in every AR platform. It has a u-shaped captured disconnector that forces a positive hold on the hammer and also has a ""pad"" that matches up to an extension on the hammer. The pad is directly in line with the rear trigger pin so when the hammer is stopped by those matching surfaces it effectively eliminates trigger slap from the hammer hitting the disconnector and greatly enhances the feel of the trigger during live fire. Absolutely compatible with the Sig MPX! All our performance series triggers utilize aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero over travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-9 / AR-45 platform, this is the trigger system for you. Features Fits any mil-spec AR Platform Straight or Curved Trigger Available Incremental Adjustable Knob Compatible with Sig MPX which was used extensively in development Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer sealed bearings for smoother and faster firing Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire.
Top takeaways
- The ELF AR-9 Trigger is adjustable from 2.75 to 4 lbs and is designed for 9mm and .45 PCC platforms, including compatibility with the Sig MPX.
- Features a smooth and fast pull with aerospace grade bearings, and the pull weight can be quickly adjusted without removing the trigger from the lower receiver.
- Constructed from wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum, offering a sturdy, drop-safe design with unique anti trigger-slap geometry.
Attributes
Make: AR-15 Style: Straight Delivery weight: 0.082kg Shipping height: 25mm Shipping width: 76mm Shipping length: 89mm UPC : 616612925923
Item details
US export classification: 0A501.c
Upgrade your AR-9 with the ELFTMANN Adjustable Trigger! 🎯 Enjoy a smooth pull and customizable weight for unmatched performance.
Classical view
Mobile view