F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
SPECS: Stainless Steel, ½-20 Threads
More...
Customer ratings for SINCLAIR INTERNATIONAL F-CLASS REST FEET 3/8X16 THREADS 3 PACK
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Be careful with hardened pins!(19/03/2012)
I have the hardened pins on my rest and managed to crack one foot all the way through on one side with a very minimal bump on a hardened surface. So don't set you rest down on a hard surface with these feet installed on hardened pins. I'm very gentle with my rest and was just setting it down on the garage floor. Picked it up to take it in the house and noticed the crack. OOPS! It happens.
Product no.: 749006465 SINCLAIR INTERNATIONAL F-CLASS REST FEET 3/8X16 THREADS 3 PACK Mfr Part: 041300 F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
The Sinclair International F-Class Rest Feet are designed to prevent rest feet from sinking into soft ground during shooting.
These rest feet are made from solid stainless steel, feature 3/8x16 threads, and are sold in a pack of three.
An additional purchase of the 749-013-900 leg is necessary for full compatibility, except for those with Sinclair Heavy Varmit Rests which already include the standard rear leg.
Product no.: 749013830 SINCLAIR INTERNATIONAL F-CLASS REST FEET 1/2"X20 THREADS 3 PACK Mfr Part: 3006112 F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
SPECS: Stainless Steel, ½-20 Threads
More...
Customer ratings for SINCLAIR INTERNATIONAL F-CLASS REST FEET 3/8X16 THREADS 3 PACK
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Be careful with hardened pins!(19/03/2012)
I have the hardened pins on my rest and managed to crack one foot all the way through on one side with a very minimal bump on a hardened surface. So don't set you rest down on a hard surface with these feet installed on hardened pins. I'm very gentle with my rest and was just setting it down on the garage floor. Picked it up to take it in the house and noticed the crack. OOPS! It happens.