MAGPUL
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 19 GEN 3

840815117544 100900006

Description
Ratings (8)

Enhances and Ensures Magazine Insertion

The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 3 is a high performance, purpose-built GLOCK frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity GLOCK factory magazines, Magpul GL9® PMAGs®, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory GLOCK magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. Due to inherent variances in GLOCK frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith complete the installation to mitigate the potential for frame damage. Made in the USA. FEATURES Reinforced polymer construction Easy installation Rugged polymer formula holds up to rough handling Large ramp area for easier reloading External dimensions ensure minimal printing when carrying concealed Compatible with Magpul, OEM and most aftermarket magazine floor plates and magazine extensions COMPATIBILITY Fits GEN 3 versions of the: G19, G23, G32, G38. Compatible with Magpul, OEM and most aftermarket magazine floor plates. Compatible with most common after-market magazine extensions. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Brownells nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H. products and parts visit www.glock.com.

More...

Customer ratings for MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 19 GEN 3 BLACK

Number of ratings: 8
From brownells.com: 8
Average rating: 2.9

Not so good (18/03/2018)

The product is made well but not designed well. It does not work with the medium to large back straps that come with gen4 Glocks.

100% (25/04/2018)

Great low profile upgrade. Works well with my G19 Gen 4 OEM Glock Magazines. No issues with seating mags or dropping them out. I donât use backstraps so that is not an issue for me. Looks great and feels great in my medium hands. 5 stars.

No fit (21/02/2018)

I installed this product on my Glock 32 , itâs supposed to be the same for as the 19 . I use 10-8 performance baseplates on my magazines and the mags will not insert into the gun fully with this magwell . One star is not an accurate rating since it will not work but itâs the lowest that I can give . Very disappointed .

Works (26/02/2018)

Works on a standard gen 3 g19 frame and p80 frame. Has a little bit of a tighter fit on p80 frame but fits just fine. Would buy again. Looks great and actually did make a difference feeding Mags. Canât beat the price compared to others.

OEM GLOCK MAGS DON'T WORK (19/03/2018)

Installed the GL enhanced magazine well for the Glock 19 Gen 3 on my Glock 19 Gen 3 and now my glock factory magazine will not work. Only the magpul magazines will work.

Kind of a bummer since it's marketed as being compatible with OEM magazines.

Magpul Magwell Fail (30/03/2018)

Active duty LEO, I installed this on my personal Duty weapon, Glock 19 Gen 3, a factory stock Glock with Glock factory magazines.

With the Magpul Magwell installed, stock factory Glock 19 mags will not seat into the pistol and fall right out!

I also tried this Magpul Magwell on factory stock Glock 19 Gen 3 RTF2 frame - same failed result - stock factory Glock 19 mags will not seat in the pistol and fall right out!

Product is total failure! IMHO

Works great (31/03/2018)

A little tight to install. I haven't had any issues with either glock or magpul mags.

Some fitting required (05/04/2018)

Did not fit when trying to install on Glock 19 Gen 3 RTF2. Backside of magwell has excessive material that prevents from seating properly on pistol grip and installing screw. Will need to shave off material for proper fitment.

Price was cheap, so I'm not too disappointed.

Read 8 more ratings on brownells.com

34.9 34.9 1 GBP

Product no.: 100900006
MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 19 GEN 3 BLACK
Mfr Part: MAG940-BLK 840815117544 The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 3 is a high performance, purpose-built GLOCK frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity GLOCK factory magazines, Magpul GL9® PMAGs®, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory GLOCK magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. Due to inherent variances in GLOCK frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith complete the installation to mitigate the potential for frame damage. Made in the USA. FEATURES Reinforced polymer construction Easy installation Rugged polymer formula holds up to rough handling Large ramp area for easier reloading External dimensions ensure minimal printing when carrying concealed Compatible with Magpul, OEM and most aftermarket magazine floor plates and magazine extensions COMPATIBILITY Fits GEN 3 versions of the: G19, G23, G32, G38. Compatible with Magpul, OEM and most aftermarket magazine floor plates. Compatible with most common after-market magazine extensions. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Brownells nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H. products and parts visit www.glock.com.

34.9 GBP 14 £34.90 *

1 In stock, delivery from UK warehouse within 2-3 days

Specs: Finish: Black Make: Glock Model: 19

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The Magpul GL Enhanced Magazine Well is compatible with standard capacity Glock factory magazines and Magpul GL magazines.
It may not fit recent generations of reduced capacity (10 rd) Glock magazines due to dimensional differences.
Certain large aftermarket floorplates and extensions might interfere with the magazine well.

Attributes

Finish: Black Make: Glock Model: 19 Delivery weight: 0.023kg Shipping height: 38mm Shipping width: 44mm Shipping length: 165mm UPC : 840815117544