Discover NOSLER Custom Competition Bullets .45 Cal (.451) 185GR for unmatched accuracy 🏆. Perfect for High Power and Long-Range shooters!
NOSLERCUSTOM COMPETITION BULLETS .45 CAL (.451) 185GR 1,000/BOX
054041532648749011995
Top takeaways
Nosler Custom Competition Bullets are designed for high performance and accuracy, utilizing the same bullet jackets as custom bullets and precise lead alloy cores.
These .45 caliber bullets are increasingly popular among High Power and Long-Range shooters.
The product comes in a box of 100 with a bullet weight of 185 grains and a diameter of 0.451 inches.
Nosler has combined the accuracy of the SAME bullet jackets used in custom bullets with their own ultra-precise lead alloy cores to create high performance match bullets in 45 calibers. These bullets are being used by High Power and Long-Range shooters more and more! 100 count box.
Top takeaways
Nosler Custom Competition Bullets are designed for high performance and accuracy, utilizing the same bullet jackets as custom bullets and precise lead alloy cores.
These .45 caliber bullets are increasingly popular among High Power and Long-Range shooters.
The product comes in a box of 100 with a bullet weight of 185 grains and a diameter of 0.451 inches.
Attributes
Bullet Style:Jacketed Hollow Point (JHP)
Bullet Weight (Grains):
-
Caliber:45 Caliber
Diameter (in):0.451
Grain:185
Quantity:1,000
Delivery weight:12.383kg
Shipping height:97mm
Shipping width:193mm
Shipping length:216mm
UPC:054041532648
Item details
Made in USA
US export classification: 0A505.x
Customers reviews
Customer ratings (12)
4.3 / 5
Definitely recommended
6.5 creedmoor 29/11/2017
I find this bullet likes to be seated out father. seating it by their book just wasn't doing it for me. at 300 yards with the right powder load from H4350 in RPR I getting .60 MOA groups.
Definitely recommended
Outstanding 13/03/2015
Goes long and accurate out of a 16" 308 AR
Slightly recommend
No quality 12/03/2015
I purchased 200 of the bullets and was really disappointed in the quality of the bullets. The meplat was unjustified by the cost of the bullets. I bought meplat trimmer to even the tips. I ended up removing .075 thousands if an inch to clean up the tips. I contacted Nosler and sent 10 representative bullets plus a single 300 grain Berger bullet. That was a month ago and have not heard back from them which I was promised they would reply. I expected better quality from match grade bullets.
Definitely recommended
Great accurate bullet 16/02/2014
I have used these with LC brass, CFE-223, Varget, IMR 8208 and a couple others with rem 7 1/2 primers. These are super accurate, getting great results from a Colt 6920, only running 2550-2600 FPS but super accurate and I will be trying them in my 223 for coyotes instead of the nosler 69 grains which I also really like.
Definitely recommended
Shot a 4.5" group at 1,000 yds. 23/07/2012
I had Dave Tubb Boron Coat 1,000 140 gr/6.5 Nosler Comp. bullets before load development. And, I always keep the vel. below 3,000 fps in my 8.5 twist barrels and I have never had any problems. I have been using them in 1,000 yard IBS / BR Comp for 2 years now and I am very pleased with them. Badlands
Definitely recommended
Awesome 17/05/2012
I can group 4/5 into a bottle cap at 100 every time out of a 1:9 AR (not free floated); the flyer is probably me. The range officer commented "you must have been reloading awhile" - I said "no, I just loaded these off a *EE [$] combo kit, it's my first batch." I think he's still laughing/in shock. VERY consistent and apparently high-quality, which you really would expect from Nosler - just not at such a bargain price. I shoot up the cheapest reloadable brass I can find just to keep a supply to load with these...
Not recommended
better for skeet shooting 03/05/2012
Used them in a 1,000 yd competition, about 50% of them disintegated 100 yds out. I do not recommend them, they are custom garbage. other wise they're very accurate.
Definitely recommended
Excellent performance! 07/07/2011
These bullets preform as well as Sierra SMK's and Lapua Scenars. 300 meter groups average less than 1/2 moa in a 6.5 284 Savage. Have less copper fouling than the softer Lapua Scenars and the price is excellent.
Definitely recommended
excellent bullet 09/03/2011
I have cleaned targets at 200 and 300 yards using these bullets for highpower competition. I shot a 100-10X at 200 rapid. I don't think it gets any better than that. I also check the bearing surface of the bullets when i get a new lot. Very small amount of bullets are out of spec, maybe 10 out of 250. I used to sort for weight, but didn't make a difference because these bullets only vary by about .2 grains per box.
Definitely recommended
This bullet isn't a copy 16/02/2011
For the most part Nosler's are copies of the Sierra bullets accept with a J4 jacket. However this bullet isn't a copy of the Sierra 107. It is a little bit more tangent in profile than the 107 and flies a little bit flatter. I switched to this bullet from 107SMKs and my X count increased. In my rifle SMKs like to be jumped 0.01 this bullet liked 0.015" Also I needed a little bit more neck tension with the Nosler over the Sierra. I've just started playing with my .243 again for NRA MR matches but with the bullets I've tried so far the Nosler 105 is the way to go.
Recommended
Give it a try 16/02/2011
Nosler 168's shot better for me than 168SMKs in my M1A so I thought I'd give the Nosler 175's a try. I've shot alot of 175 SMKs and they are a good bullet, but as is the case the Noslers just seem to shoot a little better. First match I tried them at was a MR match and using an Springfield 1903 I was able to shoot a 192 with them. Dimensionally they appear to be identical to the Sierra 175, with the difference being the J4 jacket. If you can't find Sierra's, what somthing a little cheaper or just want somthing different to try these are worth it.
Definitely recommended
superbly accurate 31/01/2011
using this bullet in my Larue OBR rifle 300 yard 5 shot group of 1.508"
Discover NOSLER Custom Competition Bullets .45 Cal (.451) 185GR for unmatched accuracy 🏆. Perfect for High Power and Long-Range shooters!
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
RCBS 300 Norma Magnum Neck Sizer Die sizes only the case neck, not the shoulder or case body, ensuring a precise fit when cases are fired from the same rifle.
The neck die set includes decapping and expander ball features for spent primer removal and correct bullet tension.
Compatible with all 7/8 to 14 reloading presses, the die comes in an RCBS plastic box, specifically designed for rifle dies.
The QUINETICS KINETIC BULLET PULLER is a hammer-style puller that allows for quick bullet removal without damaging the bullet or case.
It features a universal three-jaw chuck that is compatible with .22 centerfire through .45 caliber (except .25 ACP) and allows for easy case release with just a quarter-turn of the cap.
The puller has a durable construction with an alloy handle, molded grip, and a space age plastic body with a lifetime guarantee against breakage.
This graphite based powdered neck lube helps reduce chatter and drag on cases during sizing.
The dry powdered lube won't contaminate loading powder, eliminating the need to clean the case neck after sizing.
Available in a 1 oz. container, the product is manufactured by Redding and falls under the Case Lube category.
Help and contact
Newsletter
Classical view
Mobile view