GENTRY CUSTOM
REMINGTON 700 THREE-POSITION SAFETY SHROUD

719307211704 339000001

Description
Ratings (5)

Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles

All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation.

SPECS: Safety - 4140 steel, polished blue (PB). Approx. 2" (5cm) OAL, 2.5 oz. (71g) wt. Fits Remington 700/7/721/722/600/660/XP-100. Right- (RH).

More...

Customer ratings for GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY

Number of ratings: 5
From brownells.com: 5
Average rating: 3.4

Last resort (16/11/2009)

I spent many days trying to get this product to work. I also "lost my shirt" with the labor charged to the customer for fitting this part.
The safety lever retainer is a very small socket head screw and the threads of this screw will wear with minimal usage of engaging and disengaging the safety, and then the safety becomes very difficult to engage.

Very good product, true safety (18/02/2011)

I have installed half a dozen of these on Remington 700's and Mauser 98's. It is only a job for the experienced machinist. Set up, equipment, tooling and technique are critical. This is not a drop in. Figure 3 hours machine/fitting work. When done correctly, the safety does the job - it disconnects the firing pin from the trigger sear, and it blocks the firing pin from forward movement - like a Model 70 safety. Gentry is a good outfit to work with - full support, nice people.

A pain to fit, but indespensable (21/04/2015)

This is an excellent, one of a kind product. It gives Remington 700 owners a true 3 position safety that locks the firing pin and not just the sear. And it also gives you the ability to pull the firing pin and shroud assembly in the field for cleaning or whatever with no tools. All my Remingtons have this mod. True- it is a pain to fit, and you are likely to need a couple spare cocking pieces to screw up on before you get the hang of fitting it. Tip- when you cut the right hand side of the cocking piece to fit the safety lever, cut the contact surface at a 45 degree angle. Tip 2- when drilling the hole for the bolt locking pin, mark the location with a dab of inletting black on the face of the pin. When you get it right, this is a very handy addition to any Rem 700.

Good Product BUT---- (27/11/2017)

Safety works very well - HOWEVER, be very careful when disassembling the bolt for cleaning. If you use one of the firing pin retraction tools to pull back the pin, the safety assembly can turn a slight amount clockwise. This will immediately lock the safety assembly to the bolt. Efforts to unlock the safety assembly from the bolt will destroy the safety. Bottom line - the only safe way to disassemble the safety from the bolt body is to use the middle position and unscrew the unit.

Works on Stoll Kodiak (11/12/2017)

I had one of these installed on a Stolle Kodiak action by Bruce Thom of BAT machine, way back when he was just a wee tool and die maker at Key tropic corp. It is functioning perfectly to this day, even though I gave the rifle to my buddy's son for his graduation present. This rifle has been wet, dirty, cold, etc as it is used to kill varmints. Excellent product, if you have a top notch gunsmith to install it.

Read 5 more ratings on brownells.com

224.9 224.9 1 GBP

Product no.: 339000001
GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY
Mfr Part: NONE 719307211704 All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation.

224.9 GBP 1 £224.90 *

1 In stock, delivery from UK warehouse within 2-3 days

Specs: Make: Remington Model: 700

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Upgrades Remington 700 to a three-position safety allowing use with match grade triggers without a safety.
Features bolt locked, bolt open, and fire positions with easy field stripping, no tools required.
Requires professional gunsmith installation and is compatible with several Remington models.

Attributes

Make: Remington Model: 700 Delivery weight: 0.045kg Shipping height: 10mm Shipping width: 76mm Shipping length: 109mm UPC : 719307211704

Item details

Made in USA
US export classification: 0A501.x

Upgrade your Remington 700 with the Gentry Custom three-position safety shroud! 🔒 Enjoy enhanced functionality and easy maintenance.

Description
Ratings (5)

Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles

SPECS: Safety - 4140 steel, polished blue (PB). Approx. 2" (5cm) OAL, 2.5 oz. (71g) wt. Fits Remington 700/7/721/722/600/660/XP-100. Right- (RH).

More...