PALO VERDE GUNWORKS
ROSSI '92 SPRING KIT

100014510

Description
Ratings (7)

This Rossi ’92 Spring Kit is simple enough for the novice to install and yet sophisticated enough for the professional Gunsmith to fine-adjust for individual guns. The kit includes the following features: Main Spring adjustable to 5 different tensions with approximately 8% changes in spring tension between settings and allows for fine adjusting of mainspring tension for individual rifles and ammunition. Two different strengths of ejector spring to allow the kit to serve both small and large calibers and to allow for individual adjustment. Springs are zinc coated to resist corrosion. Spring ends are closed and ground square to sit flat and square against other parts in the gun. The nylon bushings maintain spring alignment on both ends of the hammer strut, reduce friction, and provide an easy way to adjust the tension without cutting coils. Parts are color coded, and illustrated instructions are included for easy installation.

More...

Customer ratings for PALO VERDE GUNWORKS ROSSI '92 SPRING KIT

Number of ratings: 7
From brownells.com: 6
Average rating: 5

Excellent, I took the yanks advice for the Hammer spring setup (02/06/2023)

Installed the 2 white and 2 red on my hammer spring. Brass pops up under half a foot, landing in front of me making collecting brass for reloading far easier (although less fun).

Running real smoot, didn't bother messing about with the trigger spring as my rifle is 50 years old so the spring is well worn in anyway.

Works like a charm (15/07/2014)

Just followed the instructions and works like a charm.

.357 R92 (12/11/2014)

Wow, the .357 R92 is now a joy to cycle. I initially put two blue bushing on the hammer spring (made for very light action) but was getting light strikes on hard primers. Now using two white bushings plus two red washers ( ~30% increase) to be reliable with hard primers. I can still cycle action with my pinky.

Great Kit (28/12/2014)

My Rossi '92 is a totally different gun, smooth as silk and drops cases at my feet. Went with the previous review and installed the 2 white and 2 red on my hammer spring and fires every time. I also polished and chamfered everything along with a little white lithium grease.

Will Smooth Up Your Rossi R92. (17/03/2015)

The Palo Verde kit includes all of the springs you need to smooth out the Rossi R92 action. The replacement main spring is very cleverly designed. It includes spacers that can be placed at either end of the spring to adjust tension and to help keep the spring straight as it slides down the strut. The instructions suggest which spacers you can use based on what caliber you shoot. I went with one blue, one white and obtain very solid strikes on every single primer.

The kit includes a choice of two correctly sized ejector springs that are much lighter than the factory spring. You choose based on the caliber of the round you use. I slightly smoothed the ejector "cutouts" when there is contact with the collar when the spring is compressed as suggested in the instructions and the rifle now drops the spent cases at my feet, or on the table at the lane at the range. It levers a lot smoother too - almost all of that "hitch" at the end of the forward throw when you are compressing the ejector spring is gone. A lot of the resistance you feel when levering the R92 is due to the heavy factory ejector spring and simply replacing this spring makes a huge difference.

I also changed the two other springs included in the kit, the "lever tension spring" and the "carrier stop spring". The result is a rifle that is silky smooth, but far from sloppy.

The included instructions give good advise on where you can polish critical interior parts as well as how to adjust the trigger spring for a less heavy pull. A replacement trigger spring is not included in the kit as the one in the rifle does a great job and only needs to be bent ever so slightly to lighten up the pull.

This kit is very well though out and cleverly designed. I recommend you install this spring kit before you break out a Dremel or sandpaper and start attacking the insides. You may find that this kit gets you where you want to go and you may only have to slightly polish interior parts that show obvious metal to metal contact. Sometimes it looks like the action is stiff because parts are rubbing when it's really the springs inside causing the tightness. I predict that you will like this kit if your intention is to smooth out the action on your Rossi R92.

Great kit (09/10/2015)

I installed this in my Rossi 357 mag and it is smoooooth now. In case anyone is wondering the carrier spring is in the part that lifts the shell into the breech. I love this kit and will order two more for my other rifles. I shoot cowboy competitions and is runs great.

Buy this Now (16/09/2017)

my stock Rossi was running slow and hard to close the last 1/2 "

this kit fixes a lot the problems! polish most metal too and your gun will be shooting fast and smooth .

Just wonder why Rossi cant do this from the factory

Read 6 more ratings on brownells.com

54.9 54.9 1 GBP

Product no.: 100014510
PALO VERDE GUNWORKS ROSSI '92 SPRING KIT
Mfr Part: NONE This Rossi ’92 Spring Kit is simple enough for the novice to install and yet sophisticated enough for the professional Gunsmith to fine-adjust for individual guns. The kit includes the following features: Main Spring adjustable to 5 different tensions with approximately 8% changes in spring tension between settings and allows for fine adjusting of mainspring tension for individual rifles and ammunition. Two different strengths of ejector spring to allow the kit to serve both small and large calibers and to allow for individual adjustment. Springs are zinc coated to resist corrosion. Spring ends are closed and ground square to sit flat and square against other parts in the gun. The nylon bushings maintain spring alignment on both ends of the hammer strut, reduce friction, and provide an easy way to adjust the tension without cutting coils. Parts are color coded, and illustrated instructions are included for easy installation.

54.9 GBP 5 £54.90 *

Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse

Specs: Make: Rossi Model: 92

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The Rossi '92 Spring Kit is designed for easy installation and is suitable for both novices and professionals, with adjustable main spring tension.
Kit includes two different strengths of ejector springs to accommodate small and large calibers, and zinc-coated springs to prevent corrosion.
Features nylon bushings for maintaining spring alignment and reducing friction, with color-coded parts and illustrated instructions for straightforward setup.

Attributes

Make: Rossi Model: 92 Delivery weight: 0.005kg Shipping height: 8mm Shipping width: 102mm Shipping length: 154mm

Item details

Made in USA

Upgrade your Rossi '92 with our Spring Kit! 🔧 Easy installation for novices and pros alike, featuring adjustable mainspring tension and corrosion-resistant springs.