Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Forend & Handguard Parts
Handguard & Rail Hardware
Handguard Hardware
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNTS
Support
GEISSELE AUTOMATICS
SUPER STABBY BAYONET MOUNTS
0
0
3
GBP
Product no.: 100042584
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT OD GREEN
Mfr Part: 05-1404ODG 817953029473 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT OD GREEN
Mfr Part: 05-1404ODG 817953029473 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
Specs:
Color: O.D. Green
Material: Aluminum
Product no.: 100042582
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT BLACK
Mfr Part: 05-1404B 817953029459 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT BLACK
Mfr Part: 05-1404B 817953029459 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
Specs:
Color: Black
Material: Aluminum
Product no.: 100042583
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT DDC
Mfr Part: 05-1404S 817953029466 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
GEISSELE AUTOMATICS SUPER STABBY BAYONET MOUNT DDC
Mfr Part: 05-1404S 817953029466 The Super Stabby Bayonet Mount (SSBM) allows Picatinny integration of stabby accessories to your handguard. Made from 7075-T6 Aluminum it is both extremely rigid and lightweight. The SSBM is optimized for the M9 Bayonet and is compatible with Bayonets that interface with the M16 Mil-Spec Bayonet Lugs and front barrel/muzzle rings. It only requires 5 Picatinny sections to be mounted. MATERIAL: 7075-T6 Aluminum WEIGHT: 5.7oz COLOR: Black BAYONET TYPE: M9 Bayonet COMPATIBILITY: M16 Mil-Spec Bayonet Lugs & Front Barrel/Muzzle Rings PICATINNY SLOTS: Minimum of 5 Picatinny Rail Sections BAYONET IS NOT INCLUDED DISCLAIMER: The SSBM has only been tested on Geissele rails. Use, wear, and fit on other rails is unknown. Due to the lack of control over the operational use of the SSBM, Geissele Automatics specifically disclaims any responsibility for damage to the firearm it is installed on or its parts or accessories. The bayonet blade is sharp. Handle with care and keep the tip and edge of the blade pointed away from your body or anything you do not intend to use it on at all times. Improper fit and use can cause serious injury or death. Make sure to be aware of any rough surfaces on your rifle, such as the pic rail sections on the handguard, as manipulating the rifle to use the attached bayonet may cause injury if you are not wearing proper protective equipment, which should be worn at all times when using this product. Please also note that the fundamental rules for firearms safety must be adhered to at all times.
Specs:
Color: DDC
Material: Aluminum
Upgrade your setup with the Super Stabby Bayonet Mount! 🌟 Lightweight, durable, and perfect for M9 bayonets. Enhance your handguard today!
In stock
- Is a 'Call to order' product.
£79.90
Classical view
Mobile view