Attributes
- Finish: Polished Blue
- Height: .325''
- Scope Tube Diameter: 1''
- Size: Low
- Style: Ruger-Style Rings
- Delivery weight: 0.068kg
- Shipping height: 25mm
- Shipping width: 74mm
- Shipping length: 132mm
- UPC: 736676902699
Product no.: 834000002
Mfr. No.: 90269
736676902699 1" Scope Ring, 3B, Low, BlueSPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325”. Medium (Med.) - .435”. High - .565”. Extra-High (X-High) - .680”. Offset Ring available in Medium height only. Use two to move scope eye relief back 1”. To move the scope ½” to the rear, use one Offset ring and one #834-000-003 Medium height ring.
RINGS FOR: No. 1, No. 3, Mark II Pistol, 77/22, 77/22 Mag., Mini-14 Ranch Rifle, Mini-Thirty, Redhawk
Available as single rings only. Order two (2) of the same ring for these firearm models.
RINGS FOR: M77, M77 Mark II & Super Redhawk
These models require front and rear scope rings of different heights. On M77/M77 Mark II, the shorter ring always mounts at the front of the receiver and the higher ring at the rear. On the Super Redhawk, the higher ring is always at the front of the frame and the lower ring at the rear.
Available as single rings only. Order one (1) FRONT and one (1) REAR ring from table below.
1" Rings for M77, M77 Mark II & Super Redhawk | |||||
Stock # Front | Ruger Part # Front | Stock # Rear | Ruger Part # Rear | Height | Finish |
#834-000-002 | 3B | #834-000-003 | 4B | Low/Med. | BL |
#834-000-005 | 3K | #834-000-006 | 4K | Low/Med. | SS |
#780-001-250 | 3KTG | #780-001-248 | 4KTG | Low/Med. | TG |
#834-000-003 | 4B | #834-000-004 | 5B | Med./High | BL |
#834-000-006 | 4K | #834-000-007 | 5K | Med./High | SS |
#780-001-248 | 4KTG | #780-001-249 | 5KTG | Med./High | TG |
#834-000-072 | 4BO | #834-000-004 | 5B | Med. Offset/High | BL |
#834-000-004 | 5B | #834-003-002 | 6B | High/X-High | BL |
#834-000-007 | 5K | #834-000-008 | 6K | High/X-High | SS |
#780-001-249 | 5KTG | #780-001-251 | 6KTG | High/X-High | TG |
30mm Rings for M77, M77 Mark II & Super Redhawk | |||||
Stock # Front | Ruger Part # Front | Stock # Rear | Ruger Part # Rear | Height | Finish |
#834-008-001 | 4B30 | #834-008-002 | 5B30 | Med./High | BL |
Ruger rings are of high quality 06/12/2013
I purchased these rings to mount a 30mm red dot on my
Ruger Super Redhawk. They are the fine quality expected from a product made by Ruger.
My only issue was my own fault in that I did not understand that the quantity was for ONE only ring and not a set. I had to reorder to get the second one.
Next time I will call to make sure.
Brownells ordering is just super as always.
Thanks!
Make sure you buy 2! 09/08/2012
Works as expected, but imagine my surprise when I opened my first order and there was only one ring inside. These suckers are pricey and you order them separately.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.