Features: Super 7 Upgrade Kit fits other brands of 7/8 round 45 govt length magazines The Super 7 Upgrade Kit gives a 7 round capacity The Upgrade Kit solves many lock-back and feeding issues
SPECS: Fits 1911, Government & Officer.
More...
Customer ratings for TRIPP RESEARCH SUPER 7 MAGAZINE UPGRADE KIT
Number of ratings: 7
From brownells.com: 7
Average rating: 4.7
Work great in kimber magazines(04/06/2013)
I'm surprised there are no reviews of the super 7 but the spring & follower are outstanding.
I've been a competitive shooter both in the military & civilian and practice at least twice a week.
These will work in either a 7 round or 8 round magazine in case you were wondering.
I have 5 kimber stainless magazines and the spring was ready for replacement from use & I keep a couple loaded for self defense.
I never liked the kimber spring or follower the springs were weak and caused a feeding issue from time to time especially during rapid fire.
I put the super 7 kit in all 5 mags & have put three or four hundred rounds through all of them without a feeding problem & it's easier to load the mags with this kit too.
I checked on the mags I keep loaded and after 8 months they are still strong so this is a great way to fine tune or keep that old kimber magazine running smooth.
"Hybrid" follower tops them all(21/06/2013)
The perfect "cure" for those 8 rd flush fit mags that don't provide 100% reliability - or a great way to freshen up a 7 rd mag. The Tripp hybrid follower is the best follower money can buy - period. Combined with a premium spring, this kit is how you fix mags that are worn or having the occasional FTF issue.
Perfect record so far(12/12/2013)
I have these installed in several different brands of magazines including KimPro Tac Mags, Springfield Armory's stock mags, Ruger's stock mags, etc. I have used them in 7 different 1911's with hardball, hydra shoks, and golden sabers and they have performed flawlessly. After the mags have been cycled an average of 72 times the springs lose a little bit of tension and the slide will no longer lock open. I bent the front of the top coil of the spring up a bit and the slide now locks back again and so far all mags are still going strong. Not one single failure to feed ever.
Like new again(04/09/2015)
Completely revived three Kimber factory magazines that never fed very well to smooth, flawless feeding. The follower and spring were able to be installed from the top, working mags with welded floorplates. It truly did reduce the capacity of an 8 round mag to 7, but was definitely worth the improved function.
Didn't work for me.(08/09/2017)
I may be the odd man out here, but these kits didn't work for me at all. I installed one in a Check-Mate mag body, and couldn't get it to feed the first round. The bullet jammed against the top of the chamber. Additionally, I found it very difficult to seat a full mag with the slide closed..
I'm kinda disappointed, because I have heard great things here and elsewhere about Tripp products, and wanted to see for myself. Back to,standard followers for me from now on.
The kits were installed in Check-Mate 7 round bodies, and the load I had trouble with was a 200 grain SWC plated bullet which I have been shooting for years, with no issues.
Best upgrade for new or used mags.(11/03/2018)
These are great i used them to update some older springfield mags, there my new favorite.
problems solved(29/05/2018)
Very slick follower. Made my old unreliable mags useful again. Some of my 1911s would not function with flat nose bullets but since i installed this kit they all cycle fine.Good cheap way to solve magazine feeding problems.
Product no.: 100011357 TRIPP RESEARCH SUPER 7 MAGAZINE UPGRADE KIT Mfr Part: SUPER 7 Features: Super 7 Upgrade Kit fits other brands of 7/8 round 45 govt length magazines The Super 7 Upgrade Kit gives a 7 round capacity The Upgrade Kit solves many lock-back and feeding issues
Features: Super 7 Upgrade Kit fits other brands of 7/8 round 45 govt length magazines The Super 7 Upgrade Kit gives a 7 round capacity The Upgrade Kit solves many lock-back and feeding issues
SPECS: Fits 1911, Government & Officer.
More...
Customer ratings for TRIPP RESEARCH SUPER 7 MAGAZINE UPGRADE KIT
Number of ratings: 7
From brownells.com: 7
Average rating: 4.7
Work great in kimber magazines(04/06/2013)
I'm surprised there are no reviews of the super 7 but the spring & follower are outstanding.
I've been a competitive shooter both in the military & civilian and practice at least twice a week.
These will work in either a 7 round or 8 round magazine in case you were wondering.
I have 5 kimber stainless magazines and the spring was ready for replacement from use & I keep a couple loaded for self defense.
I never liked the kimber spring or follower the springs were weak and caused a feeding issue from time to time especially during rapid fire.
I put the super 7 kit in all 5 mags & have put three or four hundred rounds through all of them without a feeding problem & it's easier to load the mags with this kit too.
I checked on the mags I keep loaded and after 8 months they are still strong so this is a great way to fine tune or keep that old kimber magazine running smooth.
"Hybrid" follower tops them all(21/06/2013)
The perfect "cure" for those 8 rd flush fit mags that don't provide 100% reliability - or a great way to freshen up a 7 rd mag. The Tripp hybrid follower is the best follower money can buy - period. Combined with a premium spring, this kit is how you fix mags that are worn or having the occasional FTF issue.
Perfect record so far(12/12/2013)
I have these installed in several different brands of magazines including KimPro Tac Mags, Springfield Armory's stock mags, Ruger's stock mags, etc. I have used them in 7 different 1911's with hardball, hydra shoks, and golden sabers and they have performed flawlessly. After the mags have been cycled an average of 72 times the springs lose a little bit of tension and the slide will no longer lock open. I bent the front of the top coil of the spring up a bit and the slide now locks back again and so far all mags are still going strong. Not one single failure to feed ever.
Like new again(04/09/2015)
Completely revived three Kimber factory magazines that never fed very well to smooth, flawless feeding. The follower and spring were able to be installed from the top, working mags with welded floorplates. It truly did reduce the capacity of an 8 round mag to 7, but was definitely worth the improved function.
Didn't work for me.(08/09/2017)
I may be the odd man out here, but these kits didn't work for me at all. I installed one in a Check-Mate mag body, and couldn't get it to feed the first round. The bullet jammed against the top of the chamber. Additionally, I found it very difficult to seat a full mag with the slide closed..
I'm kinda disappointed, because I have heard great things here and elsewhere about Tripp products, and wanted to see for myself. Back to,standard followers for me from now on.
The kits were installed in Check-Mate 7 round bodies, and the load I had trouble with was a 200 grain SWC plated bullet which I have been shooting for years, with no issues.
Best upgrade for new or used mags.(11/03/2018)
These are great i used them to update some older springfield mags, there my new favorite.
problems solved(29/05/2018)
Very slick follower. Made my old unreliable mags useful again. Some of my 1911s would not function with flat nose bullets but since i installed this kit they all cycle fine.Good cheap way to solve magazine feeding problems.