Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #3 - .850" (21.6mm)
Number of ratings: 4
From brownells.com: 4
Average rating: 5
Works better than expected(20/05/2011)
Installed this brake on a hard kicking 300WSM Weatherby Vanguard. It was so uncomfortable to shoot that the owner never used it. After installing the brake you can shoot it offhand and watch through the scope as the bullet impacts the target. Sound increase was neglegable. I would not fir it from the prone and I'm pretty sure the escaping gasses would dig a BIG hole.
Great product(20/08/2012)
This muzzle brake is a great value and works wonders. The recoil reduction for my sons mossburg 30-06 was better than 50%. I would say a .223 has more kick after installing it.
Exclent Buy!!!(11/10/2014)
I am a Gunsmith and have installed plenty of Muzzle brakes! This is one of the cheapest! and the Quality is excellent, the threads are very high quality and the fit is a very tight class 3B thread!
Does recoil reduction VERY well!! About %40 less recoil!
Outstanding product(09/03/2015)
Initially I was concerned about the low price for this product as you generally get what you pay for. I wanted the best brake possible to tame the recoil on a Sako M75 300RUM and I wasn't about to put something cheesy on this setup. Upon receipt, the craftsmanship was apparent under close inspection. The recoil reduction was well above 50% making this rifle pleasant to shoot. (The recoil had been substantial) This brake didn't affect accuracy. I highly recommend this product.
Product no.: 860100324 SHREWD #3 MUZZLE BRAKE 22 CALIBER 9/16-24 CHROME MOLY SILVER Mfr Part: NONE Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
The Shrewd #3 Muzzle Brake is designed to significantly reduce recoil and muzzle rise with a single expansion chamber and 42 ports angled forward.
Installation requires gunsmithing to enlarge the exit hole to be .020" larger than the bullet diameter, and it can accommodate up to .44 caliber bullets.
Made from 4140 chrome moly steel with a silver finish, it measures 2-5⁄8" long with an outside diameter of .850" and is for universal rifles with 9/16-24 threads.
Product no.: 860100325 SHREWD #3 MUZZLE BRAKE 22 CALIBER 5/8-24 CHROME MOLY SILVER Mfr Part: NONE Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
69.9GBP12£69.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Shrewd #3 Muzzle Brake is designed for .22 caliber rifles with a 5/8-24 thread, made from Chrome Moly steel with a silver finish, and requires gunsmithing to install.
It features a single expansion chamber with 42 total ports (21 on each side) angled forward to effectively reduce recoil and muzzle rise.
The exit hole is .220" nominally and can be enlarged to accommodate bullets up to .44 caliber, with the rear exterior customizable to match the barrel contour.
Product no.: 860101324 SHREWD #3 MUZZLE BRAKE 22 CALIBER 9/16-24 SS SILVER Mfr Part: NONE Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
The Shrewd #3 Muzzle Brake is designed for .22 caliber rifles, offering recoil reduction and muzzle rise control with a single expansion chamber and 42 angled ports.
Installation requires gunsmithing, and the exit hole is .220" in diameter, which can be enlarged to accommodate bullets up to .44 caliber.
Constructed from either 4140 chrome moly or 416 stainless steel, the muzzle brake is 2-5⁄8" long with an outside diameter of .850", and features a satin finish.
Product no.: 860101325 SHREWD #3 MUZZLE BRAKE 22 CALIBER 5/8-24 SS SILVER Mfr Part: NONE Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
The Shrewd #3 Muzzle Brake is designed to reduce recoil and muzzle rise with a single expansion chamber and 42 ports angled forward.
Installation requires gunsmithing, as it comes with a .220" exit hole that must be opened to .020" larger than the bullet diameter, up to .44 caliber.
It is made of 4140 steel or 416 stainless steel, measures 2-5/8" long, has an outside diameter of .850", and is designed for universal rifles with 5/8-24 threads.
Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #3 - .850" (21.6mm)
Number of ratings: 4
From brownells.com: 4
Average rating: 5
Works better than expected(20/05/2011)
Installed this brake on a hard kicking 300WSM Weatherby Vanguard. It was so uncomfortable to shoot that the owner never used it. After installing the brake you can shoot it offhand and watch through the scope as the bullet impacts the target. Sound increase was neglegable. I would not fir it from the prone and I'm pretty sure the escaping gasses would dig a BIG hole.
Great product(20/08/2012)
This muzzle brake is a great value and works wonders. The recoil reduction for my sons mossburg 30-06 was better than 50%. I would say a .223 has more kick after installing it.
Exclent Buy!!!(11/10/2014)
I am a Gunsmith and have installed plenty of Muzzle brakes! This is one of the cheapest! and the Quality is excellent, the threads are very high quality and the fit is a very tight class 3B thread!
Does recoil reduction VERY well!! About %40 less recoil!
Outstanding product(09/03/2015)
Initially I was concerned about the low price for this product as you generally get what you pay for. I wanted the best brake possible to tame the recoil on a Sako M75 300RUM and I wasn't about to put something cheesy on this setup. Upon receipt, the craftsmanship was apparent under close inspection. The recoil reduction was well above 50% making this rifle pleasant to shoot. (The recoil had been substantial) This brake didn't affect accuracy. I highly recommend this product.