BSF BARRELS
308 AR BARREL CARBON FIBER 6.5 CREEDMOOR 1-8 TWIST

100026798

Description
Ratings (2)

Impressive Accuracy From a Lightweight, Futuristic-Looking Barrel

BSF builds their match-grade carbon fiber barrels with exceptional attention to detail that ensures you’ll achieve the best possible accuracy from your 6.5 Creedmoor AR-pattern rifle without getting a hernia lugging it around! BSF 6.5 Creedmoor barrels are turned from ordnance-grade 416R stainless steel, then given a roll-wrapped, tensioned, carbon fiber sleeve. The sleeve keeps weight down while providing excellent rigidity, coupled with enhanced cooling. Why the sleeve method, rather than simple carbon fiber wrapping? The BSF folks believe wrapping traps heat and, as a result, is more likely to delaminate. Further, BSF uses a special carbon fiber that expands at the same rate as the 416R, and holes drilled into the jacket allow air to circulate around the barrel and vent heat quickly. Less heat distortion means far less risk of accuracy fade as your 6.5 Creedmoor chambered AR-15’s barrel heats up. Fits .308 sized AR upper receiver 6 Groove button-rifled 5/8"-24 tpi muzzle threads .875" O.D. Barrel extension included BSF offers their 6.5 Creedmoor carbon fiber match barrels with a 1-8" rifling twist effectively stabilizes that widest variety of popular bullet weights. And each barrel is thoroughly inspected by an experienced technician before leaving the BSR shop, ensuring you get a barrel that’s as accurate as it is good looking!

More...

Customer ratings for BSF BARRELS 20 IN BARREL 6.5 CREEDMOOR CARBON FIBER RIFLE GAS SYSTEM

Number of ratings: 2
From brownells.com: 2
Average rating: 5

Great barrel (08/07/2018)

Bought this barrel to build an AR10 in 6.5cm for my dad. Went together nicely. The carbon wrap from the muzzle to the gas block was a little thicker than .875 by just a hair. I used a clamp on gas block so it wasn't a problem. Barrel cleaned up nice before taking it to the range. Shot just about 1/2 inch groups at 100. The only complaint I could possibly mustard up would be that the +2 gas tube puts the gas block just outside of a 15" hand guard. I just didn't expect that but probably because this is only my second build. It cycles good, it shoots good, it looks good, what more could anyone ask?

VERY VERY HAPPY (08/07/2018)

Built an Aero Precision DPMS based AR10 in 6.5cm. Very happy with the quality of the barrel, the looks, the accuracy, the weight, and how easy it cleans. It was this barrel or a Lilja barrel for me, but I wanted to try something a little lighter because I wanted the full potential of a 24" barrel wo/being to front heavy. I only have 20 rounds through it but have printed sub moa groups from 100-500 yards with Hornady 140grain BTHP black box ammo. (not even sure if it is match ammo or not) I honestly didn't think an autoloader could shoot this good. I did put a Hiperfire Hipertouch 24C Trigger to have about a 2 pound trigger pull and that helps shrink groups but still sub .5moa at 100 yards barely broken in, THAT IS AWESOME!!! I also highly recommend an adjustable gas block to allow you to control the recoil and stroke of the BCG, it makes a big difference in over all performance and follow up shots. 100 yards .4 moa / 500 yards .7 moa (and I changed the eye focus a bit) Buy with confidence that I didn't have until after I took the plung and returned from the range a happy shooter. :-)

<img width="500" src='/userdocs/reviewimages/d51c0834-32dd-4a97-b66e-21e89288d945.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/9188ca53-a4fe-42df-a249-640569da60b6.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/264b1459-c90a-45ff-a76b-33ddbff7fa75.jpg' alt=''>

Read 2 more ratings on brownells.com

819.9 869.9 2 GBP

Product no.: 100026798
BSF BARRELS 20 IN BARREL 6.5 CREEDMOOR CARBON FIBER RIFLE GAS SYSTEM
Mfr Part: FR1020C003 BSF builds their match-grade carbon fiber barrels with exceptional attention to detail that ensures you’ll achieve the best possible accuracy from your 6.5 Creedmoor AR-pattern rifle without getting a hernia lugging it around! BSF 6.5 Creedmoor barrels are turned from ordnance-grade 416R stainless steel, then given a roll-wrapped, tensioned, carbon fiber sleeve. The sleeve keeps weight down while providing excellent rigidity, coupled with enhanced cooling. Why the sleeve method, rather than simple carbon fiber wrapping? The BSF folks believe wrapping traps heat and, as a result, is more likely to delaminate. Further, BSF uses a special carbon fiber that expands at the same rate as the 416R, and holes drilled into the jacket allow air to circulate around the barrel and vent heat quickly. Less heat distortion means far less risk of accuracy fade as your 6.5 Creedmoor chambered AR-15’s barrel heats up. Fits .308 sized AR upper receiver 6 Groove button-rifled 5/8"-24 tpi muzzle threads .875" O.D. Barrel extension included BSF offers their 6.5 Creedmoor carbon fiber match barrels with a 1-8" rifling twist effectively stabilizes that widest variety of popular bullet weights. And each barrel is thoroughly inspected by an experienced technician before leaving the BSR shop, ensuring you get a barrel that’s as accurate as it is good looking!

819.9 GBP 10 £819.90 *

Is a 'Call to order' product.

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Cartridge: 6.5 Creedmoor Finish: Carbon Fiber Length: 20'' Make: AR .308 Twist: 1-8

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Restrictions

Is a 'Call to order' product.

Top takeaways

BSF Barrels' 6.5 Creedmoor carbon fiber barrels are designed for accuracy and lightweight, featuring a roll-wrapped, tensioned carbon fiber sleeve over 416R stainless steel.
The carbon fiber sleeve is engineered to expand at the same rate as the steel to reduce heat distortion, with drilled holes for better cooling, thus maintaining accuracy during rapid fire.
Each barrel comes with a 1-8" twist rate for stabilizing a wide range of bullet weights and is rigorously inspected to ensure top-notch performance.

Attributes

Cartridge: 6.5 Creedmoor Finish: Carbon Fiber Length: 20'' Make: AR .308 Twist: 1-8 Delivery weight: 1.338kg Shipping height: 102mm Shipping width: 102mm Shipping length: 635mm

Item details

Made in USA
US export classification: 0A501.c

Product no.: 100026800
BSF BARRELS 24 IN BARREL 6.5 CREEDMOOR CARBON FIBER RIFLE +2 GAS SYSTEM
Mfr Part: FR1024C005 BSF builds their match-grade carbon fiber barrels with exceptional attention to detail that ensures you’ll achieve the best possible accuracy from your 6.5 Creedmoor AR-pattern rifle without getting a hernia lugging it around! BSF 6.5 Creedmoor barrels are turned from ordnance-grade 416R stainless steel, then given a roll-wrapped, tensioned, carbon fiber sleeve. The sleeve keeps weight down while providing excellent rigidity, coupled with enhanced cooling. Why the sleeve method, rather than simple carbon fiber wrapping? The BSF folks believe wrapping traps heat and, as a result, is more likely to delaminate. Further, BSF uses a special carbon fiber that expands at the same rate as the 416R, and holes drilled into the jacket allow air to circulate around the barrel and vent heat quickly. Less heat distortion means far less risk of accuracy fade as your 6.5 Creedmoor chambered AR-15’s barrel heats up. Fits .308 sized AR upper receiver 6 Groove button-rifled 5/8"-24 tpi muzzle threads .875" O.D. Barrel extension included BSF offers their 6.5 Creedmoor carbon fiber match barrels with a 1-8" rifling twist effectively stabilizes that widest variety of popular bullet weights. And each barrel is thoroughly inspected by an experienced technician before leaving the BSR shop, ensuring you get a barrel that’s as accurate as it is good looking!

869.9 GBP 5 £869.90 *

Is a 'Call to order' product.

Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse

Specs: Cartridge: 6.5 Creedmoor Finish: Carbon Fiber Length: 24'' Make: AR .308 Twist: 1-8

Add to shopping list

Ask question