Criterion Hybrid contour match grade .308 AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour. These .308 AR barrels feature a M118LR chamber. The longer throat of the M118LR enables Criterion .308 AR barrels to improve upon the performance of loads utilizing heavier bullets, serving to reduce wind drift when fired at longer ranges. This configuration is designed to accommodate either .308 Winchester or 7.62x51 ammunition, and comes complete with an installed barrel extension. CBI .308 AR barrels are compatible with DPMS, Remington, and Fulton pattern rifles, and accept muzzle devices with a 5/8x24 thread. An indent is provided opposite the gas port to enable easy installation. Chambers are finished, but headspace should be checked prior to installation. Chrome lined variants are available in 16, 18 and 20 inch lengths. These barrels are button rifled, and have been hand lapped to ensure consistent bore uniformity.
Customer ratings for CRITERION BARRELS INC .308 AR 16" HYBRID MID-LENGTH, CHROME-LINED
Number of ratings: 6
From brownells.com: 6
Average rating: 4.8
Very accurate(22/10/2017)
Installed it on a Aero upper receiver with JP lightened bolt and adjustable gas block, and the JP one piece buffer spring. Once sighted in with .308 Win 147 grain bullets ( various brands) at 100 yds using a Night Force scope. It was able to hit a 20 inch round plate at 600 yards. The group was a little less than 10 inches. Using Remington and Federal match grade ammo, the group tightened up to around 6 to 8 inches. Using IMI match brass, Vihtavouri powder, and the 165 grain Hornady match bullets (new custom loaded), the group tightened up to about 5 to 6 inches, and thats at 500 and 600 yards. Mostly in the 5 inch or less range. Range only go up to 600. No wind, temp was about 80 degrees.
Accurate(15/03/2018)
I bought one of these barrels before for a customer build, was surprised with the accuracy and bought one for myself. Iâve bought the 22â Criterion stainless target barrel and wasnât happy with the accuracy, actually enough that I sent it back to Criterion. This 20â chrome lined barrel is very well made, very accurate. 165 HPBT Sierra, 44.5 grains of Vit N-550, 1/2âfive shot groups at 200 yards.
very Nice(19/10/2015)
appears well crafted the other reviewers comments on the 16"barrel apply here as well Haven't shot it yet but depending on group size will change the number of stars to 5 ! I hope !
Amendment to my Previous review !(18/12/2015)
When I purchased this I had no idea how accurate it would be, I have since then put 100 rounds+ thru the barrel and feel it was worth the money, initially I expected smaller groups then I got but at the 40 round mark the groups started to shrink, I now am getting 3/4 " center to center of 3 shot groups at 100 yards, consistently with 168 Match King bullets or Federal match ammunition, I am thrilled to get that kind of accuracy out of a chrome lined barrel.! Thank You Brownell's (not to mention CBI !) Oh and I have read that it is possible that the grouping might improve from the above !
Great barrel(25/12/2015)
I am very pleased with this barrel, function and fit are great and the accuracy is outstanding, I have not measured the groups, but with good work on my part the holes are all touching at 100 yards with 168 grain A Max bullets.
Perfect 16" .308 Barrel(29/09/2015)
Fit and finish on this barrel is amazing. The phosphate finish is so dark, you'd think it was nitride and the chrome plate just wraps up into the crown, forming a perfect concentric. Melonite is awesome, but the jury is still out on what that second dose of high heat does to the metal after it's already been treated. That's why I prefer old school phosphate and chrome lining and this one's treatment is top notch. When a company goes to the length to do such an awesome job with the chrome, you know they are pros. One of the reasons melonite is so popular is because it's easier to do than chrome lining, so is it better, time will tell. The ramps and lugs are sharp and smooth. The profile isn't heavy, but obviously not government either. It's between the two, but leaning towards heavy, which I prefer. The shoulder for the gas block is perfectly cut, and the dimple was just slightly more towards the shoulder than the gas block set screw hole and had a little depth to it. This is good because as you torque the screw down it pulls the block up close to the shoulder. Not sure if that is the case with all blocks, but that's how it worked with my Spike's lo pro block. It also fit my Aero Precision upper perfectly AND they are made in my home state! What's not to like!
Product no.: 100016753 CRITERION BARRELS INC .308 AR 16" HYBRID MID-LENGTH, CHROME-LINED Mfr Part: 10160-HYM Criterion Hybrid contour match grade .308 AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour. These .308 AR barrels feature a M118LR chamber. The longer throat of the M118LR enables Criterion .308 AR barrels to improve upon the performance of loads utilizing heavier bullets, serving to reduce wind drift when fired at longer ranges. This configuration is designed to accommodate either .308 Winchester or 7.62x51 ammunition, and comes complete with an installed barrel extension. CBI .308 AR barrels are compatible with DPMS, Remington, and Fulton pattern rifles, and accept muzzle devices with a 5/8x24 thread. An indent is provided opposite the gas port to enable easy installation. Chambers are finished, but headspace should be checked prior to installation. Chrome lined variants are available in 16, 18 and 20 inch lengths. These barrels are button rifled, and have been hand lapped to ensure consistent bore uniformity.
539.9GBP13£539.90
*
Is a 'Call to order' product.
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Barrel Weight: 2.4 lbsCartridge: 308 Winchester, 7.62 mm NATOContour: HybridFinish: Parkerized, Chrome LinedGas System Length: Mid-LengthLength: 16''Make: AR .308Muzzle Threads: 5/8-24Twist: 1-10
Criterion Hybrid .308 AR barrels are designed for accuracy without heavy weight, featuring a M118LR chamber for improved performance with heavier bullets and reduced wind drift.
These barrels accommodate .308 Winchester or 7.62x51 ammo, are chrome-lined, come in 16", 18", and 20" lengths, and are compatible with DPMS, Remington, and Fulton pattern rifles.
The barrels have a mid-length gas system, 5/8x24 muzzle threads, and require headspace checks before installation; they are button rifled and hand lapped for bore uniformity.
Attributes
Barrel Weight:
2.4 lbs
Cartridge:
308 Winchester,7.62 mm NATO
Contour:
Hybrid
Finish:
Chrome Lined,Parkerized
Gas System Length:
Mid-Length
Length:
16''
Make:
AR .308
Muzzle Threads:
5/8-24
Twist:
1-10
Delivery weight: 1.106kgShipping height: 51mmShipping width: 51mmShipping length: 533mm
Item details
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100016754 CRITERION BARRELS INC .308 AR 18" HYBRID MID-LENGTH, CHROME-LINED Mfr Part: 10180-HYM Criterion Hybrid contour match grade .308 AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour. These .308 AR barrels feature a M118LR chamber. The longer throat of the M118LR enables Criterion .308 AR barrels to improve upon the performance of loads utilizing heavier bullets, serving to reduce wind drift when fired at longer ranges. This configuration is designed to accommodate either .308 Winchester or 7.62x51 ammunition, and comes complete with an installed barrel extension. CBI .308 AR barrels are compatible with DPMS, Remington, and Fulton pattern rifles, and accept muzzle devices with a 5/8x24 thread. An indent is provided opposite the gas port to enable easy installation. Chambers are finished, but headspace should be checked prior to installation. Chrome lined variants are available in 16, 18 and 20 inch lengths. These barrels are button rifled, and have been hand lapped to ensure consistent bore uniformity.
Product no.: 100016755 CRITERION BARRELS INC .308 AR 20" HYBRID RIFLE, CHROME-LINED Mfr Part: 10200-HYR Criterion Hybrid contour match grade .308 AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour. These .308 AR barrels feature a M118LR chamber. The longer throat of the M118LR enables Criterion .308 AR barrels to improve upon the performance of loads utilizing heavier bullets, serving to reduce wind drift when fired at longer ranges. This configuration is designed to accommodate either .308 Winchester or 7.62x51 ammunition, and comes complete with an installed barrel extension. CBI .308 AR barrels are compatible with DPMS, Remington, and Fulton pattern rifles, and accept muzzle devices with a 5/8x24 thread. An indent is provided opposite the gas port to enable easy installation. Chambers are finished, but headspace should be checked prior to installation. Chrome lined variants are available in 16, 18 and 20 inch lengths. These barrels are button rifled, and have been hand lapped to ensure consistent bore uniformity.
Criterion Hybrid contour match grade .308 AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour. These .308 AR barrels feature a M118LR chamber. The longer throat of the M118LR enables Criterion .308 AR barrels to improve upon the performance of loads utilizing heavier bullets, serving to reduce wind drift when fired at longer ranges. This configuration is designed to accommodate either .308 Winchester or 7.62x51 ammunition, and comes complete with an installed barrel extension. CBI .308 AR barrels are compatible with DPMS, Remington, and Fulton pattern rifles, and accept muzzle devices with a 5/8x24 thread. An indent is provided opposite the gas port to enable easy installation. Chambers are finished, but headspace should be checked prior to installation. Chrome lined variants are available in 16, 18 and 20 inch lengths. These barrels are button rifled, and have been hand lapped to ensure consistent bore uniformity.
Customer ratings for CRITERION BARRELS INC .308 AR 16" HYBRID MID-LENGTH, CHROME-LINED
Number of ratings: 6
From brownells.com: 6
Average rating: 4.8
Very accurate(22/10/2017)
Installed it on a Aero upper receiver with JP lightened bolt and adjustable gas block, and the JP one piece buffer spring. Once sighted in with .308 Win 147 grain bullets ( various brands) at 100 yds using a Night Force scope. It was able to hit a 20 inch round plate at 600 yards. The group was a little less than 10 inches. Using Remington and Federal match grade ammo, the group tightened up to around 6 to 8 inches. Using IMI match brass, Vihtavouri powder, and the 165 grain Hornady match bullets (new custom loaded), the group tightened up to about 5 to 6 inches, and thats at 500 and 600 yards. Mostly in the 5 inch or less range. Range only go up to 600. No wind, temp was about 80 degrees.
Accurate(15/03/2018)
I bought one of these barrels before for a customer build, was surprised with the accuracy and bought one for myself. Iâve bought the 22â Criterion stainless target barrel and wasnât happy with the accuracy, actually enough that I sent it back to Criterion. This 20â chrome lined barrel is very well made, very accurate. 165 HPBT Sierra, 44.5 grains of Vit N-550, 1/2âfive shot groups at 200 yards.
very Nice(19/10/2015)
appears well crafted the other reviewers comments on the 16"barrel apply here as well Haven't shot it yet but depending on group size will change the number of stars to 5 ! I hope !
Amendment to my Previous review !(18/12/2015)
When I purchased this I had no idea how accurate it would be, I have since then put 100 rounds+ thru the barrel and feel it was worth the money, initially I expected smaller groups then I got but at the 40 round mark the groups started to shrink, I now am getting 3/4 " center to center of 3 shot groups at 100 yards, consistently with 168 Match King bullets or Federal match ammunition, I am thrilled to get that kind of accuracy out of a chrome lined barrel.! Thank You Brownell's (not to mention CBI !) Oh and I have read that it is possible that the grouping might improve from the above !
Great barrel(25/12/2015)
I am very pleased with this barrel, function and fit are great and the accuracy is outstanding, I have not measured the groups, but with good work on my part the holes are all touching at 100 yards with 168 grain A Max bullets.
Perfect 16" .308 Barrel(29/09/2015)
Fit and finish on this barrel is amazing. The phosphate finish is so dark, you'd think it was nitride and the chrome plate just wraps up into the crown, forming a perfect concentric. Melonite is awesome, but the jury is still out on what that second dose of high heat does to the metal after it's already been treated. That's why I prefer old school phosphate and chrome lining and this one's treatment is top notch. When a company goes to the length to do such an awesome job with the chrome, you know they are pros. One of the reasons melonite is so popular is because it's easier to do than chrome lining, so is it better, time will tell. The ramps and lugs are sharp and smooth. The profile isn't heavy, but obviously not government either. It's between the two, but leaning towards heavy, which I prefer. The shoulder for the gas block is perfectly cut, and the dimple was just slightly more towards the shoulder than the gas block set screw hole and had a little depth to it. This is good because as you torque the screw down it pulls the block up close to the shoulder. Not sure if that is the case with all blocks, but that's how it worked with my Spike's lo pro block. It also fit my Aero Precision upper perfectly AND they are made in my home state! What's not to like!