Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Select following for other rifle/handgun muzzle, cylinder facing &chamfering tools.
SPECS: Facing Cutter Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Handle Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Brass. 1¼" (3.2cm) long. Packaged in a polypropylene box.
More...
Customer ratings for BROWNELLS 90° CUTTER & BRASS PILOT FOR .44 MUZZLE
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Good Jub Squaring Muzzle(18/03/2010)
If you don't have access to a lathe this is the best way to face a muzzle that you have cut. While the lathe is preferable this does a really good job in a pinch. It's built well, very sharp, and leaves a nice finish on the metal. I strongly recommend finishing the crown with 79 degree crown cutter.
Product no.: 080947440 BROWNELLS 90° CUTTER & BRASS PILOT FOR .44 MUZZLE050806013056 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
The 90° muzzle facing cutter is used for squaring a muzzle after shortening or repairing damage, and it includes a cutter, handle, and a brass pilot for .44 caliber in a polypropylene box.
Additional pilots for various calibers can be purchased separately to use with the interchangeable pilot system, ensuring the cutter stays properly aligned.
The set is made of hardened steel with an aluminum handle, and the dimensions of the cutter, handle, and pilot are specified for optimal use in barrel chamfering.
Product no.: 080947320 BROWNELLS 90° CUTTER & BRASS PILOT FOR .32 MUZZLE050806012943 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947357 BROWNELLS 90° CUTTER & BRASS PILOT FOR .38/.357 MUZZLE050806012998 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947384 BROWNELLS 90° CUTTER & BRASS PILOT FOR .38-40 MUZZLE050806013018 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947790 BROWNELLS 90° CUTTER & BRASS PILOT FOR 7MM MUZZLE050806013131 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947416 BROWNELLS 90° CUTTER & BRASS PILOT FOR .416 MUZZLE050806013049 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947459 BROWNELLS 90° CUTTER & BRASS PILOT FOR .45 BP MUZZLE050806013087 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Product no.: 080947480 BROWNELLS 90° CUTTER & BRASS PILOT FOR .480 RUGER MUZZLE050806013094 Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Hardened steel, 90° facing cutter squares a muzzle after shortening; or use to repair dings and damage. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately.
Select following for other rifle/handgun muzzle, cylinder facing &chamfering tools.
SPECS: Facing Cutter Hardened steel. 3¼" (8.2cm) long (except .165" cutter, 2-3/8" (6cm) long). 1" (2.5cm) or .750" (19mm) diameter as required. Handle Aluminum. 3½" (8.9cm) long. 3 oz. (85 g). Pilot - Brass. 1¼" (3.2cm) long. Packaged in a polypropylene box.
More...
Customer ratings for BROWNELLS 90° CUTTER & BRASS PILOT FOR .44 MUZZLE
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Good Jub Squaring Muzzle(18/03/2010)
If you don't have access to a lathe this is the best way to face a muzzle that you have cut. While the lathe is preferable this does a really good job in a pinch. It's built well, very sharp, and leaves a nice finish on the metal. I strongly recommend finishing the crown with 79 degree crown cutter.