Help and contact
(0) Basket
Newsletter
ERATAC
ADJUSTABLE INCLINATION MOUNT
619.9
689.9
6
GBP
Product no.: 430105684
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 30MM SCOPE, LEVER SYSTEM
Mfr Part: T4073-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 30MM SCOPE, LEVER SYSTEM
Mfr Part: T4073-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 30mm
Style: Clamp-On
Product no.: 430105685
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 34MM SCOPE, LEVER SYSTEM
Mfr Part: T4074-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 34MM SCOPE, LEVER SYSTEM
Mfr Part: T4074-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 34mm
Style: Clamp-On
Product no.: 430105686
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 36MM SCOPE, LEVER SYSTEM
Mfr Part: T4076-0022 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 36MM SCOPE, LEVER SYSTEM
Mfr Part: T4076-0022 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 36mm
Style: Clamp-On
Product no.: 430105687
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 30MM SCOPE, NUT SYSTEM
Mfr Part: T5073-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 30MM SCOPE, NUT SYSTEM
Mfr Part: T5073-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 30mm
Style: Clamp-On
Product no.: 430105689
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 36MM SCOPE, NUT SYSTEM
Mfr Part: T5076-0022 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 36MM SCOPE, NUT SYSTEM
Mfr Part: T5076-0022 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 36mm
Style: Clamp-On
Product no.: 430105688
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 34MM SCOPE, NUT SYSTEM
Mfr Part: T5074-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
ERATAC ADJUSTABLE INCLINATION MOUNT FOR 34MM SCOPE, NUT SYSTEM
Mfr Part: T5074-0025 New GEN-2 with lightweight lever or nut system. Up to 7% lighter. Often the range of elevation adjustment of the scope in not the adequate to compensate for the bullet drop at long ranges. This scope mount was developed to offset the missing adjustment range of the scope. The inclination of the scope mount can be adjusted individually in steps of 10 from 0 – 70 MOA. The mount and the rifle scope can remain on the rifle. Self-locking thread inserts ensure permanent and stable seating of both bolted connections. Eratac guarantee 100% repeatability and shot strength. The upper and lower part of the mount are securely connected to each other by a screw running across the hand wheel diagonally. The hinge is designed as a solid tapered joint and ensures play-free seating of the components. NEW: The mount is now also supplied with a dial in mrad/MIL. The inclination can be changed in steps of 5 between 0 – 20 mrad/MIL. A Dozen Reasons for ERATAC Mounts: Machined from solid high-grade aluminum Hard anodized, matte black Made acc. to Mil-Spec. Type III Rust-proof components 100% repeatability Immediate return to zero! Tested up to cal. .50 BMG Available in many heights for different weapons and scopes With or without inclination for long-range shooting Rings with UNIVERSAL interface for attaching various tactical accessories Clamping system manufactured acc. to NATO-STANAG 4694, compatible with Mil-Std. 1913 Locking by either safety levers or hexagonal nuts without losable parts 100% made in Germany
Specs:
Finish: Black
Height: 2.24''
Length: 5.35''
Scope Tube Diameter: 34mm
Style: Clamp-On
Discover the ERATAC Adjustable Inclination Mount for 30mm scopes. 🌟 Lightweight, precise adjustments, and 100% repeatability for long-range shooting!
Classical view
Mobile view