Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
More...
Customer ratings for LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28
Number of ratings: 8
From brownells.com: 8
Average rating: 3.5
Not Good!(23/05/2016)
Barrel installs easy and looks great! Out to the range and to my surprise about every 2 to 3 rounds was a misfire, would not go into battery, and ejection was a big issue. I was really disappointed.
Flawless(11/02/2017)
Wanted a threaded barrel for future use and at this price point for a USA made barrel, it is a great item.
I purchased it and didn't get to use it until I took my enhanced CCW class today and out 100 rounds though it in a very short time. I had 0 feeding or ejecting issues but I did have 1 round not fire. Though this was not due to the barrel though.
The thread protector does like to twist off a little after 30 or so rounds (maybe 1/10 of a turn) but nothing out of the ordinary.
Great addition to my G19(19/02/2017)
I wanted to wait until I had used it a bit to review. I have close to 1000 rounds through this barrel now and not a single FTL, FTF, or FFE. It has worked flawlessly. The thread protector does seem to come loose about 1/2 turn every time I take it to the range, but no more than that no matter how many rounds I fire. Now just waiting for the HPA to pass.
It's black, threaded, and shoots lead(20/01/2017)
I bought this for my Glock26 Gen4. Drops in with no issues. Has cycling hick-up from time to time only when cambering a fresh magazine, not while shooting. Put 50 115Gr. FMJ's through it before it started grouping well. 2" groups at 9yds. Handled the 115Grs. & 124 +P NATO's just fine. Haven't shot any lead cast through it yet. Performs as well at storm lake barrels that I've owned.
Only issues I could think of is the coating isn't all that tough but many "match grade" barrels have no coating at all. After initial shooting the barrel was marred near the rear top of the chamber and the lockup area. Like any thread protector it needs to be tightened up from time to time as it becomes loose from shooting and/or carrying. It seemed to hit 1.5" higher than the factory barrel at 9yds.
Does not fit in the Glock 19 9mm Gen 4 stock forget about it. "Thanks" "Experts" for your recommendation NOT!
3 guns in one(07/07/2018)
Sixth LW Glock replacement barrel I have purchased and first review. Fit on 30+ year old Gen 2 M22 is as close to perfect as it gets. I shoot Powder Coat Lee 356-125-2r sized @.358 and Accurate Mold 125D no lube groove also at .358. Barrel Slugged at .3565. Accuracy at first was disappointing, but after 5-600 rounds the barrel was capable of sub 1 1/2 inch groups at 11 yds and 2 inch inch groups at 25 yds. Consistently hit 9 in pie plates at 100 yards. Also handled 125 GDHP (for 357Sig) and S.147gr TMJ's well with PP and A#9 @1250-1300fps.
Not a "deal" as advertised but exceptionally pleased with purchase. Well worth it...
Not reliable (05/05/2016)
When actually shooting, this barrel shot really well, but I say "when shooting" because over the course of about 250 rounds (3 different types of ammo, all brass jacketed), I got 2 failures to eject and 6 failures to feed. Never had these issues before and, while still at the range, switched back to my OEM barrel and didn't have any more.
Great barrel!(06/09/2017)
I've got well over 3,000+ rounds through this barrel with only one issue and that was I couldn't do 15+1 using magpul pmags. No issues on stock mags though. The coating and accuracy are excellent. Definitely a step up over the factory barrel. It is a match grade barrel so there are tighter tolerances so remember to use quality ammunition.
Product no.: 100803016 LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28 Mfr Part: AW-31357TH639737069242 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100803004 LONE WOLF DIST. M19 ALPHAWOLF BARREL M/19 9MM THREADED 1/2 X 28 Mfr Part: AW19TH397370692660 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Product no.: 100803010 LONE WOLF DIST. M23 & M32 ALPHAWOLF BARREL M/23 40 S&W THREADED 9/16 X 24 Mfr Part: AW-2340TH639737069280 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Product no.: 100803014 LONE WOLF DIST. M26 ALPHAWOLF BARREL M/26 9MM THREADED 1/2 X 28 Mfr Part: AW26TH397370693346 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Product no.: 100803006 LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/22 40 S&W THREADED 9/16 X 24 Mfr Part: AW2240TH397370692110 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Product no.: 100803002 LONE WOLF DIST. M17 ALPHAWOLF BARREL M/17 9MM THREADED 1/2 X 28 Mfr Part: AW17TH397370691984 Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.
More...
Customer ratings for LONE WOLF DIST. M22 & M31 ALPHAWOLF BARREL M/31 .357SIG THREADED 1/2X28
Number of ratings: 8
From brownells.com: 8
Average rating: 3.5
Not Good!(23/05/2016)
Barrel installs easy and looks great! Out to the range and to my surprise about every 2 to 3 rounds was a misfire, would not go into battery, and ejection was a big issue. I was really disappointed.
Flawless(11/02/2017)
Wanted a threaded barrel for future use and at this price point for a USA made barrel, it is a great item.
I purchased it and didn't get to use it until I took my enhanced CCW class today and out 100 rounds though it in a very short time. I had 0 feeding or ejecting issues but I did have 1 round not fire. Though this was not due to the barrel though.
The thread protector does like to twist off a little after 30 or so rounds (maybe 1/10 of a turn) but nothing out of the ordinary.
Great addition to my G19(19/02/2017)
I wanted to wait until I had used it a bit to review. I have close to 1000 rounds through this barrel now and not a single FTL, FTF, or FFE. It has worked flawlessly. The thread protector does seem to come loose about 1/2 turn every time I take it to the range, but no more than that no matter how many rounds I fire. Now just waiting for the HPA to pass.
It's black, threaded, and shoots lead(20/01/2017)
I bought this for my Glock26 Gen4. Drops in with no issues. Has cycling hick-up from time to time only when cambering a fresh magazine, not while shooting. Put 50 115Gr. FMJ's through it before it started grouping well. 2" groups at 9yds. Handled the 115Grs. & 124 +P NATO's just fine. Haven't shot any lead cast through it yet. Performs as well at storm lake barrels that I've owned.
Only issues I could think of is the coating isn't all that tough but many "match grade" barrels have no coating at all. After initial shooting the barrel was marred near the rear top of the chamber and the lockup area. Like any thread protector it needs to be tightened up from time to time as it becomes loose from shooting and/or carrying. It seemed to hit 1.5" higher than the factory barrel at 9yds.
Does not fit in the Glock 19 9mm Gen 4 stock forget about it. "Thanks" "Experts" for your recommendation NOT!
3 guns in one(07/07/2018)
Sixth LW Glock replacement barrel I have purchased and first review. Fit on 30+ year old Gen 2 M22 is as close to perfect as it gets. I shoot Powder Coat Lee 356-125-2r sized @.358 and Accurate Mold 125D no lube groove also at .358. Barrel Slugged at .3565. Accuracy at first was disappointing, but after 5-600 rounds the barrel was capable of sub 1 1/2 inch groups at 11 yds and 2 inch inch groups at 25 yds. Consistently hit 9 in pie plates at 100 yards. Also handled 125 GDHP (for 357Sig) and S.147gr TMJ's well with PP and A#9 @1250-1300fps.
Not a "deal" as advertised but exceptionally pleased with purchase. Well worth it...
Not reliable (05/05/2016)
When actually shooting, this barrel shot really well, but I say "when shooting" because over the course of about 250 rounds (3 different types of ammo, all brass jacketed), I got 2 failures to eject and 6 failures to feed. Never had these issues before and, while still at the range, switched back to my OEM barrel and didn't have any more.
Great barrel!(06/09/2017)
I've got well over 3,000+ rounds through this barrel with only one issue and that was I couldn't do 15+1 using magpul pmags. No issues on stock mags though. The coating and accuracy are excellent. Definitely a step up over the factory barrel. It is a match grade barrel so there are tighter tolerances so remember to use quality ammunition.