Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Bolt Parts
Charging Handle Parts
Charging Handles
BRAVO COMPANY AR-15 BCMGUNFIGHTER CHARGING HANDLE GEN 2 BLACK
Support
BRAVO COMPANY
AR-15 BCMGUNFIGHTER CHARGING HANDLE GEN 2 BLACK
104.9
104.9
2
GBP
New
Product no.: 100027144
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 4B MEDIUM LATCH
Mfr Part: BCM-GFH-MOD4B-5 812526021229 The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 4B MEDIUM LATCH
Mfr Part: BCM-GFH-MOD4B-5 812526021229 The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Top takeaways
- The BCMGunfighter Gen 2 charging handle features improved geometry for a straighter pull and reduced stress on the latch pin, enhancing durability and reliability.
- It includes a redesigned shield to prevent gas blowback when firing suppressed, and beveled edges for a snag-free, easy-to-grasp profile.
- Compatible with all mil-spec direct impingement AR-15 upper receivers, it's available in Mod 3B (large latch) and Mod 4B (medium latch) configurations, made from robust forged 7075 T6 aluminum.
Attributes
Delivery weight: 0.075kg Shipping height: 25mm Shipping width: 127mm Shipping length: 229mm UPC : 812526021229
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
New
Product no.: 100027145
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 3B LARGE LATCH
Mfr Part: BCM-GFH-MOD3B-5 812526021212 The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
BRAVO COMPANY BCMGUNFIGHTER CHARGING HANDLE MOD 3B LARGE LATCH
Mfr Part: BCM-GFH-MOD3B-5 812526021212 The original BCMGunfighter AR-15 charging handle was a massive improvement over the spindly standard "mi-spec" handle. And now BCM introduces their Gen 2 charging handle - improved, upgraded, and refined over the already excellent original. One key difference is that you no longer need to worry about breaking the pivot pin when you have to put some “oomph” on the handle. Redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. The BCMGunfighter Gen2 Charging Handle also has a redesigned shield that prevents gas from blowing back into your face when you’re running your rifle suppressed. Beveled edges optimize the contours of the handle for an easy to grasp, snag-free profile. Fits all mil-spec direct impingement AR-15 upper receivers Snag-free Mod 3B and Mod 4B configurations (described below) Robust forged 7075 T6 aluminum construction Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength NOT compatible with adjustable gas keyed bolt / carrier groups The BCMGunfighter Gen 2 AR-15 charging handle offers a larger hand engagement surface than a mil-spec handle coupled with a smaller silhouette. It’s available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Either way, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15.
Top takeaways
- The BCMGunfighter Gen 2 AR-15 charging handle features improved geometry for stress reduction on the pivot pin and a more efficient, straighter pull.
- It includes a redesigned shield to prevent gas blowback when firing suppressed and has beveled edges for a snag-free, easy-to-grasp profile.
- Constructed from robust forged 7075 T6 aluminum, it offers a larger surface for hand engagement and is available in Mod 3B (large latch) and Mod 4B (medium latch) configurations.
Attributes
Delivery weight: 0.074kg Shipping height: 25mm Shipping width: 127mm Shipping length: 229mm UPC : 812526021212
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Upgrade your AR-15 with the BCMGunfighter Gen 2 Charging Handle! 💪 Enhanced design for reliability and ease of use. Perfect for mil-spec receivers.
In stock
£38.90
£38.90 - £39.90
In stock
£15.90
£9.90 - £15.90
Classical view
Mobile view