Your basket is empty.

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

J P ENTERPRISES
AR-15/ 308 AR EZ TRIGGER™ SYSTEM

812872022055 452000120

Description
Ratings (3)

Complete trigger system installs in five minutes without fitting or modification of parts on the trigger or your receiver. All adjustments are made with setscrews, eliminating the risk of ruining the trigger due to errors in fitting. Includes the JP Speed Hammer for fast lock time, plus “anti-walk” pins with button head cap screws for easy removal and reinstallation of the trigger system. Overtravel adjustment screw lets you set your trigger for a clean, crisp, single-stage release. Comes with two hammer springs: install the yellow spring to get a 3 to 3½ pull for competition or recreational shooting with non-military ammunition. The red spring gives a 3½ to 4 lb. pull and more hammer force for use with the harder primers found on military (5.56mm NATO) ammo and for law enforcement duty use. The red spring should be used in any installation on an AR-style .308 rifle. For a heavier, 4½ lb. pull for tactical applications or NRA Service Rifle competition, install the JPS4.5 spring kit. JPFCP-1EZ fits small pin (.154") receivers.

SPECS: Steel, black oxide finish. Models available for rifles with .154" dia. (military and current commercial rifles) or .169" diameter (Colt rifles) hammer and trigger pin holes. Measure your pins and select the correct kit. NOTE: Will not fit Colt rifles with pinned-in full-auto sear block. JP recommends JPFC-2 trigger for those installations. Kit includes trigger, hammer, disconnector/sear trigger spring, yellow hammer spring, red hammer spring, safety assembly, (2) anti-walk pins, disconnector spring, instructions, and DVD with video showing step-by-step installation.

More...

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Number of ratings: 3
From brownells.com: 3
Average rating: 4.7

EXCELLENT (17/02/2011)

Easy to install. Couldn't be happier. I am not a gunsmith and live where I don't have easy access to one. Followed the instructions and DVD. Took longer than 5 minutes they describe but much less than 30 minutes. Did it several times to understand how it all works. Only issue was the tight fit of the oversize pins on my lower. Took a little practice to get the right wiggle to insert them. Each time was easier.

Superior Product (10/08/2011)

I have put many of the older JP triggers in and this is by far the best trigger I have ever installed. JP did a world class job on this product. Simple to install easy adjustment and a superior end result. The only thing I would add is to use some Emery paper and only Emery paper to the inside of the receiver holes to remove any residue from the Anodize to make a smooth light press fit. Excellent trigger. My hats off to JP.

Very Nice Trigger Kit. (05/08/2014)

It'll take more than 5 minutes just to read the instructions, but this kit will produce an excellent trigger pull without any polishing, or grinding. There are two set screws that control the movement of the disconnector, and trigger over travel. The sear engagement is short, and crisp on release of the hammer. Mating surfaces are well finished, and need no work. I installed this kit in an Anderson 308 lower, and later in a DPMS LR308 lower where it was needed more urgently. Both installations resulted in clean breaking pulls running at just under 4 pounds with minimal over travel. The set screws had to be adjusted again after removing the assembly from the Anderson, and installing it in the DPMS. The set screws have to be locked with red Loctite, which is provided with the kit. Heat is required to loosen screws that are set with red Loctite, so be sure to get to your adjustments quickly after applying the Loctite. Self locking set screws would be better, but they don't exist in such small sizes, so red Loctite it is. This trigger system gives a remarkably good result at a reasonable price. I have trigger systems on other AR platforms that are as good, but not at the price of the J P. This trigger kit is a good buy and gives back a really improved trigger pull on AR platforms.

Read 3 more ratings on brownells.com

254.9 254.9 1 GBP

Sale

Product no.: 452000120
J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,
Mfr Part: JPFCP1EZ 812872022055 Complete trigger system installs in five minutes without fitting or modification of parts on the trigger or your receiver. All adjustments are made with setscrews, eliminating the risk of ruining the trigger due to errors in fitting. Includes the JP Speed Hammer for fast lock time, plus “anti-walk” pins with button head cap screws for easy removal and reinstallation of the trigger system. Overtravel adjustment screw lets you set your trigger for a clean, crisp, single-stage release. Comes with two hammer springs: install the yellow spring to get a 3 to 3½ pull for competition or recreational shooting with non-military ammunition. The red spring gives a 3½ to 4 lb. pull and more hammer force for use with the harder primers found on military (5.56mm NATO) ammo and for law enforcement duty use. The red spring should be used in any installation on an AR-style .308 rifle. For a heavier, 4½ lb. pull for tactical applications or NRA Service Rifle competition, install the JPS4.5 spring kit. JPFCP-1EZ fits small pin (.154") receivers.

203.92 GBP 0 £203.92 * £254.90

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Make: AR .308 Style: Adjustable, Kit

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The JP Enterprises EZ Trigger system is easy to install in five minutes without modification and is adjustable with setscrews.
It includes a JP Speed Hammer and "anti-walk" pins, with an overtravel adjustment screw for a crisp, single-stage release.
Comes with two hammer springs for different pull weights and applications, and an additional JPS4.5 spring kit is available for a heavier pull.

Attributes

Make: AR .308 Style: Adjustable,Kit Delivery weight: 0.259kg Shipping height: 51mm Shipping width: 133mm Shipping length: 184mm UPC : 812872022055

Item details

Made in USA
US export classification: 0A501.c

Upgrade your AR-15 with the EZ Trigger™ System! ⚙️ Fast installation, adjustable pull weights, and enhanced performance for any shooter.

Description
Ratings (3)

More...

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Number of ratings: 3
From brownells.com: 3
Average rating: 4.7

EXCELLENT (17/02/2011)

Superior Product (10/08/2011)

Very Nice Trigger Kit. (05/08/2014)

Read 3 more ratings on brownells.com

J P ENTERPRISES
AR-15/ 308 AR EZ TRIGGER™ SYSTEM

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Top takeaways

Attributes

Item details

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Connect

Secure payment methods

Trade Associations

Welcome!

J P ENTERPRISES AR-15/ 308 AR EZ TRIGGER™ SYSTEM

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Top takeaways

Attributes

Item details

Customer ratings for J P ENTERPRISES JPFCP-1EZ TRIGGER KIT, .154" PINS,

Connect

Secure payment methods

Trade Associations

Welcome!

J P ENTERPRISES
AR-15/ 308 AR EZ TRIGGER™ SYSTEM