Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Bolt Parts
Charging Handle Parts
Charging Handles
BREEK ARMS AR 308 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE
Support
BREEK ARMS
AR 308 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE
79.9
84.9
4
GBP
Product no.: 430107003
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Mfr Part: BRK557-FDE 812296030926 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Mfr Part: BRK557-FDE 812296030926 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
Specs:
Finish: Flat Dark Earth
Hand: Ambidextrous
Make: AR .308
Style: Short
Top takeaways
- The Breek Arms WARHAMMER is an affordable, high-quality upgrade for .308/7.62 AR rifles, featuring a low-profile, ambidextrous design with textured grooves for easy handling with gloves.
- Made of 7075-T6 aluminum with a Type III hard-coat anodized finish, it fits various AR 308 platforms and has set-back latches that accommodate large optics.
- The MOD2 design includes a higher rear shelf and relief cuts to divert gas away from the shooter's face, improving the experience, especially when shooting suppressed.
Attributes
Finish: Flat Dark Earth Hand: Ambidextrous Make: AR .308 Style: Short Delivery weight: 0.082kg Shipping height: 32mm Shipping width: 80mm Shipping length: 229mm UPC : 812296030926
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Product no.: 430107002
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Mfr Part: BRK557 812296030919 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Mfr Part: BRK557 812296030919 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
Specs:
Finish: Black
Hand: Ambidextrous
Make: AR .308
Style: Short
Product no.: 430107004
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRY
Mfr Part: BRK557-MGRAY 812296030933 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRY
Mfr Part: BRK557-MGRAY 812296030933 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
Specs:
Finish: Gray
Hand: Ambidextrous
Make: AR .308
Style: Short
Product no.: 430107005
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Mfr Part: BRK557-RGREEN 812296030940 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Mfr Part: BRK557-RGREEN 812296030940 The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.
Specs:
Finish: O.D. Green
Hand: Ambidextrous
Make: AR .308
Style: Short
Upgrade your .308 with the AR 308 Warhammer Micro Mod2 Ambidextrous Charging Handle. 💪 Durable, sleek, and easy to use for any shooter!
Classical view
Mobile view