BKL TECHNOLOGIES
BKL Tech 500 Series Picatinny Adapters

814136025215 749012540

Description
Ratings (2)

Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.

More...

Customer ratings for BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT

Number of ratings: 2
From brownells.com: 2
Average rating: 3.5

Rail Mounting Problems (17/04/2014)

I successfully mounted this blk technologies weaver/ picatinny monolithic rail adapter to the "SWISS PRODUCTS SCHMIDT-RUBIN K31 SCOPE MOUNT" with no problems. In this respect the product is fine

However, when trying to mount my Larue QD LT112 rifle scope mount to this monolithic rail, the cross slots of the rail did not align with the slots of the riflescope mount. Thus I could not mount my riflescope.

Just to make sure it wasn't user error, I removed a riflescope, with standard 2 piece rings, from another rifle I had. It had been mounted on picatinny rails, but it too did not fit on the blk technologies rail.

So I guess this picatinny weaver adapter from blk technologies can only use 2 piece rings, not monolithic scope rings. Also, those 2 piece rings will be set at a different measurement than MIL-STD-1913 rails or its affiliates; you can't just swap your QD riflescope between rails because they won't fit.

I'll send this back in and get the 2 piece adapter, but I just can't help but wonder, why did they machine it like this?

Nice Dovetail to Weaver Rail (18/04/2017)

I used this rail on an old yet fun to shoot Glenfield Marlin model 75 dovetail then topped it off with a Bushnell trs-25 red dot. A very welcome relief to some aging eyes. The rail fit very nicely and snugged up very tight. It's simple to install and comes with the required allen wrench. It takes up the entire length of the dovetail on the model 75 and looks pretty cool. You will want to measure your dovetail and make sure it is "standard" width. I like the fact it is one piece so the finish looks very good.

And of course Brownell's is second to none with shipping and order tracking. Overall very happy with this purchase.

Read 2 more ratings on brownells.com

49.9 74.9 2 GBP

Product no.: 749012540
BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT
Mfr Part: BKL-566-MB 814136025215 Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.

49.9 GBP 0 £49.90 *

Notify on availability

Out of stock. No ETA.

Specs: Color: Black Material: Aluminum Number of Bases: 2-Piece Style: Picatinny, Dovetail Style Bases

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Aircraft-grade aluminum adapter rail converts 3/8" or 11mm dovetail mounts to Picatinny scope mounts.
Features six crossbolts for even pressure and alignment on the dovetail, with generous cross slots for various optics.
Includes clamping screws for secure mounting and is compatible with oversized rails; extends .620" above dovetail.

Attributes

Colour: Black Material: Aluminum Number of Bases: 2-Piece Style: Dovetail Style Bases,Picatinny Delivery weight: 0.136kg Shipping height: 61mm Shipping width: 107mm Shipping length: 183mm UPC : 814136025215

Item details

Made in USA

Product no.: 749012541
BKL TECHNOLOGIES 4" DOVETAIL TO WEAVER ADAPTER MOUNT
Mfr Part: BKL-568-MB 814136025222 Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.

74.9 GBP 0 £74.90 *

Notify on availability

Out of stock. No ETA.

Specs: Color: Black Material: Aluminum Number of Bases: 2-Piece Style: Picatinny, Dovetail Style Bases

Add to shopping list

Ask question