Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

BROWNELLS
CARBIDE SEMI-AUTO PISTOL SIGHT BASE CUTTER

080621066
60\ & 65\ Shoulder x .330"
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistols made from hardened steel. 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder.
94.9 94.9 2 GBP
Product no.: 080621066
BROWNELLS 60°CARBIDE SEMI-AUTO SIGHT BASE CUTTER Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistols made from hardened steel. 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder.
Notify on availability
Not available.
Specs: Degree: 60

Top takeaways

  1. The BROWNELLS CARBIDE SEMI-AUTO PISTOL SIGHT BASE CUTTER is available in 60° and 65° shoulder angles to match standard Colt factory and various mil-spec 1911 Autos, as well as other sights with similar dovetails.
  2. Designed for use exclusively in a milling machine, the solid carbide cutter is 2 inches long with a 3⁄8 inch diameter shank, offering durability when cutting through hardened steel pistol materials.
  3. The actual cutting diameter of the cutter is .330", requiring multiple passes for installation to accommodate factory variations and milling tolerances.

Attributes

Degree: 60 Delivery weight: 0.068kg Shipping height: 8mm Shipping width: 76mm Shipping length: 157mm

Item details

Made in USA



Product no.: 080621065
BROWNELLS 65 CARBIDE SEMI-AUTO SIGHT BASE CUTTER .330"
Mfr Part: 65X330CARBID 65X330CARBID Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistols made from hardened steel. 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder.
94.9 GBP 0 £94.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Degree: 65

Top takeaways

  1. The Sight Base Cutter is specifically designed for cutting 65° dovetails on standard and mil-spec 1911 Autos, as well as other sights like Wichita Hi-Mount and older Bo-Mar.
  2. It has an actual cutting diameter of .330" and may require multiple passes for installation to accommodate factory variations and milling tolerances.
  3. This solid carbide cutter is 2" long with a 3/8" diameter shank, intended for use in a milling machine only and is designed to resist wear even when cutting hardened steel pistols.

Attributes

Degree: 65 Delivery weight: 0.023kg Shipping height: 3mm Shipping width: 74mm Shipping length: 142mm UPC : 65X330CARBID

Item details

Made in USA


Cut dovetails with precision using the Brownells 60° Carbide Semi-Auto Pistol Sight Base Cutter 🔧. Perfect for Colt and 1911 Autos!

60\ & 65\ Shoulder x .330"
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistols made from hardened steel. 2" (5cm) long, 3⁄8" (9.5mm) diameter shank. 60° or 65° shoulder.
Back to top