Help and contact
(0) Basket
Newsletter
Home
Gunsmith Tools
General Gunsmith Tools
Screwdrivers & Sets
Magna-Tip Bits
BROWNELLS MAGNA-TIP® BITS
Support
BROWNELLS
MAGNA-TIP® BITS
8.9
12.9
24
GBP
Product no.: 080185010
BROWNELLS MAGNA-TIP BIT #185-10, SD=9/64" ALLEN
Mfr Part: H5226X 050806011175 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
BROWNELLS MAGNA-TIP BIT #185-10, SD=9/64" ALLEN
Mfr Part: H5226X 050806011175 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
Specs:
Bit Number: 185-10
Blade Diameter: .141
Blade Thickness: .141
Style: Allen
Product no.: 080185000
BROWNELLS MAGNA-TIP BIT #185-0, SD=5/64" ALLEN
Mfr Part: H5222X 050806011151 Bit #185-0, SD=5/64" Allen
BROWNELLS MAGNA-TIP BIT #185-0, SD=5/64" ALLEN
Mfr Part: H5222X 050806011151 Bit #185-0, SD=5/64" Allen
Specs:
Bit Number: 185-0
Blade Diameter: 5/64
Blade Thickness: .078
Style: Allen
Product no.: 080185002
BROWNELLS MAGNA-TIP BIT #185-00, SD=1/16" ALLEN
Mfr Part: H5221X 050806011168 Bit #185-00, SD=1/16" Allen
BROWNELLS MAGNA-TIP BIT #185-00, SD=1/16" ALLEN
Mfr Part: H5221X 050806011168 Bit #185-00, SD=1/16" Allen
Specs:
Bit Number: 185-00
Blade Diameter: .063
Blade Thickness: .063
Style: Allen
Product no.: 080185100
BROWNELLS MAGNA-TIP BIT #185-1, SD=3/32" ALLEN
Mfr Part: H5223X 050806011182 Bit #185-1, SD=3/32" Allen
BROWNELLS MAGNA-TIP BIT #185-1, SD=3/32" ALLEN
Mfr Part: H5223X 050806011182 Bit #185-1, SD=3/32" Allen
Specs:
Bit Number: 185-1
Blade Diameter: .094
Blade Thickness: .094
Style: Allen
Product no.: 080185200
BROWNELLS MAGNA-TIP BIT #185-2, SD=1/8" ALLEN
Mfr Part: H5225X 050806011205 Bit #185-2, SD=1/8" Allen
BROWNELLS MAGNA-TIP BIT #185-2, SD=1/8" ALLEN
Mfr Part: H5225X 050806011205 Bit #185-2, SD=1/8" Allen
Specs:
Bit Number: 185-2
Blade Diameter: .125
Blade Thickness: .125
Style: Allen
Product no.: 080185300
BROWNELLS MAGNA-TIP BIT #185-3, SD=5/32" ALLEN
Mfr Part: H5227X 050806011212 Bit #185-3, SD=5/32" Allen
BROWNELLS MAGNA-TIP BIT #185-3, SD=5/32" ALLEN
Mfr Part: H5227X 050806011212 Bit #185-3, SD=5/32" Allen
Specs:
Bit Number: 185-3
Blade Diameter: .156
Blade Thickness: .156
Style: Allen
Product no.: 080185400
BROWNELLS MAGNA-TIP BIT #185-4, SD=3/16" ALLEN 050806011229 Bit #185-4, SD=3/16" Allen
BROWNELLS MAGNA-TIP BIT #185-4, SD=3/16" ALLEN 050806011229 Bit #185-4, SD=3/16" Allen
Specs:
Bit Number: 185-4
Blade Diameter: .188
Blade Thickness: .188
Style: Allen
Product no.: 080185500
BROWNELLS MAGNA-TIP BIT #185-5, SD=7/32" ALLEN
Mfr Part: H5229X 050806011236 Bit #185-5, SD=7/32" Allen
BROWNELLS MAGNA-TIP BIT #185-5, SD=7/32" ALLEN
Mfr Part: H5229X 050806011236 Bit #185-5, SD=7/32" Allen
Specs:
Bit Number: 185-5
Blade Diameter: .219
Blade Thickness: .219
Style: Allen
Product no.: 080185600
BROWNELLS MAGNA-TIP BIT #185-6, SD=1/4" ALLEN
Mfr Part: H5220X 050806011243 Bit #185-6, SD=1/4" Allen
BROWNELLS MAGNA-TIP BIT #185-6, SD=1/4" ALLEN
Mfr Part: H5220X 050806011243 Bit #185-6, SD=1/4" Allen
Specs:
Bit Number: 185-6
Blade Diameter: .250
Blade Thickness: .250
Style: Allen
Product no.: 080185900
BROWNELLS MAGNA-TIP BIT #185-9, SD=7/64" ALLEN
Mfr Part: H5224X 050806011250 Bit #185-9, SD=7/64" Allen
BROWNELLS MAGNA-TIP BIT #185-9, SD=7/64" ALLEN
Mfr Part: H5224X 050806011250 Bit #185-9, SD=7/64" Allen
Specs:
Bit Number: 185-9
Blade Diameter: .109
Blade Thickness: .109
Style: Allen
Product no.: 080440001
BROWNELLS MAGNA-TIP BIT #440-0, SD=PHILLIPS #0
Mfr Part: D1220XX 050806008786 Bit #440-0, SD=Phillips #0
BROWNELLS MAGNA-TIP BIT #440-0, SD=PHILLIPS #0
Mfr Part: D1220XX 050806008786 Bit #440-0, SD=Phillips #0
Specs:
Bit Number: 440-0
Blade Thickness: .142
Style: Phillips
Product no.: 080440100
BROWNELLS MAGNA-TIP BIT #440-1, SD=PHILLIPS #1
Mfr Part: D1221XX 050806008793 Bit #440-1, SD=Phillips #1
BROWNELLS MAGNA-TIP BIT #440-1, SD=PHILLIPS #1
Mfr Part: D1221XX 050806008793 Bit #440-1, SD=Phillips #1
Specs:
Bit Number: 440-1
Blade Thickness: .168
Style: Phillips
Product no.: 080440200
BROWNELLS MAGNA-TIP BIT #440-2, SD=PHILLIPS #2
Mfr Part: D1222XX 050806008809 Bit #440-2, SD=Phillips #2
BROWNELLS MAGNA-TIP BIT #440-2, SD=PHILLIPS #2
Mfr Part: D1222XX 050806008809 Bit #440-2, SD=Phillips #2
Specs:
Bit Number: 440-2
Blade Thickness: .216
Style: Phillips
Product no.: 080445002
BROWNELLS MAGNA-TIP BIT #445-00, SD=.138, BT=.028
Mfr Part: 44500 050806008908 Bit #445-00, SD=.138, BT=.028
BROWNELLS MAGNA-TIP BIT #445-00, SD=.138, BT=.028
Mfr Part: 44500 050806008908 Bit #445-00, SD=.138, BT=.028
Specs:
Bit Number: 445-00
Blade Diameter: .138
Blade Thickness: .028
Style: Hollow Ground
Product no.: 080445032
BROWNELLS MAGNA-TIP BIT #445-0, SD=.154, BT=.032
Mfr Part: 4450 050806008915 Bit #445-0, SD=.154, BT=.032
BROWNELLS MAGNA-TIP BIT #445-0, SD=.154, BT=.032
Mfr Part: 4450 050806008915 Bit #445-0, SD=.154, BT=.032
Specs:
Bit Number: 445-0
Blade Diameter: .154
Blade Thickness: .032
Style: Hollow Ground
Product no.: 080445103
BROWNELLS MAGNA-TIP BIT #445-10, SD=.185, BT=.034
Mfr Part: 44510 050806008922 Bit #445-10, SD=.185, BT=.034
BROWNELLS MAGNA-TIP BIT #445-10, SD=.185, BT=.034
Mfr Part: 44510 050806008922 Bit #445-10, SD=.185, BT=.034
Specs:
Bit Number: 445-10
Blade Diameter: .185
Blade Thickness: .034
Style: Hollow Ground
Product no.: 080445135
BROWNELLS MAGNA-TIP BIT #445-1, SD=.247, BT=.035
Mfr Part: 4451 050806008939 Bit #445-1, SD=.278, BT=.035
BROWNELLS MAGNA-TIP BIT #445-1, SD=.247, BT=.035
Mfr Part: 4451 050806008939 Bit #445-1, SD=.278, BT=.035
Specs:
Bit Number: 445-1
Blade Diameter: .250
Blade Thickness: .035
Style: Hollow Ground
Product no.: 080445203
BROWNELLS MAGNA-TIP BIT #445-20, SD=.216, BT=.036
Mfr Part: 44520 050806008946 Bit #445-20, SD=.216, BT=.036
BROWNELLS MAGNA-TIP BIT #445-20, SD=.216, BT=.036
Mfr Part: 44520 050806008946 Bit #445-20, SD=.216, BT=.036
Specs:
Bit Number: 445-20
Blade Diameter: .216
Blade Thickness: .036
Style: Hollow Ground
Product no.: 080445240
BROWNELLS MAGNA-TIP BIT #445-2, SD=.278, BT=.040
Mfr Part: 4452 050806008953 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
BROWNELLS MAGNA-TIP BIT #445-2, SD=.278, BT=.040
Mfr Part: 4452 050806008953 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
Specs:
Bit Number: 445-2
Blade Diameter: .250
Blade Thickness: .040
Style: Hollow Ground
Product no.: 080445303
BROWNELLS MAGNA-TIP BIT #445-30, SD=.248, BT=.038
Mfr Part: 44530 050806008960 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
BROWNELLS MAGNA-TIP BIT #445-30, SD=.248, BT=.038
Mfr Part: 44530 050806008960 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
Specs:
Bit Number: 445-30
Blade Diameter: .248
Blade Thickness: .038
Style: Hollow Ground
Product no.: 080445342
BROWNELLS MAGNA-TIP BIT #445-3, SD=.278, BT=.042
Mfr Part: 4453 050806008977 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
BROWNELLS MAGNA-TIP BIT #445-3, SD=.278, BT=.042
Mfr Part: 4453 050806008977 With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground bit transmits all the energy of twist (torque) evenly and smoothly, up the shank of the bit. Not only does hollow grinding permit this power transfer, it also gives complete metal-to-metal contact between the tip of the bit and the entire screw slot. Thus, maximum power can be exerted as in a finely tapered gun spring.So-called "hollow-ground" screwdrivers which have been dubbed off square, result in all torque pressures concentrating at the square edge of the grind along the tip. As every gunsmith knows, such a flaw in a spring results in breakage! Standard, straight-tapered screwdrivers deliver all torque pressures to the fine edge of the screw slot. PLUS, being tapered, the laws of simple physics force the bit OUT of the slot.The complete sets include eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws.PERFECT FITYou can get even more versatility, and an absolutely perfect bit-to-screw-slot fit by buying extra bits and grinding them to an exact fit using the special Shaping Stone shown on this page.MATERIALS USEDThe bits used in the Brownells MAGNA-TIP screwdrivers are manufactured expressly for heavy industry. They are used in high-speed, production, impact-power drivers for setting screws in mass production applications. They HAVE to be built with the right combination of hardness and durability to give maximum strength and wear!
Specs:
Bit Number: 445-3
Blade Diameter: .250
Blade Thickness: .042
Style: Hollow Ground
Product no.: 080445446
BROWNELLS MAGNA-TIP BIT #445-4, SD=.278, BT=.046
Mfr Part: 4454 050806008984 Bit #445-4, SD=.278, BT=.046
BROWNELLS MAGNA-TIP BIT #445-4, SD=.278, BT=.046
Mfr Part: 4454 050806008984 Bit #445-4, SD=.278, BT=.046
Specs:
Bit Number: 445-4
Blade Diameter: .250
Blade Thickness: .046
Style: Hollow Ground
Product no.: 080445655
BROWNELLS MAGNA-TIP BIT #445-6, SD=.360, BT=.055 050806009004 Bit #445-6, SD=.360, BT=.055
BROWNELLS MAGNA-TIP BIT #445-6, SD=.360, BT=.055 050806009004 Bit #445-6, SD=.360, BT=.055
Specs:
Bit Number: 445-6
Blade Diameter: .360
Blade Thickness: .055
Style: Hollow Ground
Product no.: 080445550
BROWNELLS MAGNA-TIP BIT #445-5, SD=.312, BT=.050
Mfr Part: 4455 050806008991 Bit #445-5, SD=.312, BT=.050
BROWNELLS MAGNA-TIP BIT #445-5, SD=.312, BT=.050
Mfr Part: 4455 050806008991 Bit #445-5, SD=.312, BT=.050
Specs:
Bit Number: 445-5
Blade Diameter: .312
Blade Thickness: .050
Style: Hollow Ground
Discover the Brownells MAGNA-TIP® Bits for a perfect fit in any gun screw 🔧. Durable and designed for maximum torque, ideal for gunsmiths!
In stock
£9.90
£9.90 - £12.90
Reordered
£36.90
£9.90 - £36.90
In stock
£33.90
£16.90 - £34.90
Classical view
Mobile view