Help and contact
(0) 
Newsletter
SHILEN
CONTOUR #3 BARREL
SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).
Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.
SHILEN 25 CALIBER 1-10 TWIST #3 CHROME MOLY BARREL
Mfr Part: 257103CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are made with meticulous craftsmanship using the "Cold Forming" process for precise rifling and uniformity, ensuring high-quality performance.
- Barrels undergo rigorous inspections including air-gauge and borescope inspections to meet strict tolerance and uniformity standards, with only those passing all tests being sold.
- Special Orders for barrels not in stock require full payment in advance, are non-cancelable, non-refundable, and have an 8-10 week delivery time.
Attributes
Caliber: 25 Caliber (.257) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.52kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 22 CALIBER 1-9 TWIST #3 CHROME MOLY BARREL
Mfr Part: 2293CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
2 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted with precision, using the "Cold Forming" process for rifling, and are subject to rigorous quality control measures including air-gauge and borescope inspections.
- The barrels are made from high-quality materials, either 4140 chrome-moly or 416 Stainless Steel, and are designed for match-grade performance with exacting tolerances.
- Custom orders require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time, emphasizing the commitment to quality and customer satisfaction.
Attributes
Caliber: 22 Caliber (.223-.224) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-9 Delivery weight: 1.565kg Shipping height: 28mm Shipping width: 30mm Shipping length: 654mm
Item details
US export classification: 0A501.c
SHILEN 22 CALIBER 1-12 TWIST #3 CHROME MOLY BARREL
Mfr Part: 22123CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
3 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The Shilen 22 Caliber #3 Chrome Moly Barrel is crafted for accuracy, with meticulous attention to the uniformity of the lands and grooves, ensuring the quality of the gun's shooting performance.
- Barrels are rigorously inspected using air-gauging and borescope methods to meet tight tolerances and high standards, with only those passing all tests being sold.
- Barrels that do not meet the stringent quality checks are reprocessed, emphasizing the manufacturer's commitment to maintaining their reputation for high-quality products.
Attributes
Caliber: 22 Caliber (.223-.224) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-12 Delivery weight: 1.588kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 22 CLAIBER 1-14 TWIST #3 CHROME MOLY BARREL
Mfr Part: 22143CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
3 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are made with meticulous attention to detail, using the "Cold Forming" process for rifling, ensuring high accuracy and uniformity.
- The barrels undergo rigorous quality control, including air-gauge and borescope inspections, with strict groove tolerances and no straightening to maintain stress relief.
- Special orders for barrels not in stock require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time.
Attributes
Caliber: 22 Caliber (.223-.224) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-14 Delivery weight: 1.61kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 6MM 1-10 TWIST #3 CHROME MOLY BARREL
Mfr Part: 6MM103CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are meticulously crafted with a focus on internal precision, using the "Cold Forming" process for rifling, ensuring extremely close uniformity for accuracy.
- Each barrel undergoes rigorous quality control, including air-gauge and borescope inspections, with only those meeting strict tolerance specifications offered to customers.
- Barrels are made from high-quality materials, with chrome moly or stainless steel options, and require full payment for special orders, which are non-cancellable and non-refundable.
Attributes
Caliber: 243/6 mm (.243) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.565kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 6.5MM 1-9 TWIST #3 CHROME MOLY BARREL
Mfr Part: 65MM93CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen 6.5mm barrels are crafted for accuracy, with meticulous attention to the uniformity of the lands and grooves, and are rigorously inspected to ensure quality.
- Barrels are made from high-quality chrome moly steel or stainless steel, with a #3 contour and a 1-9 twist rate, suitable for match-grade applications.
- Custom orders are non-cancellable and non-refundable, require full payment in advance, and have an 8-10 week delivery time.
Attributes
Caliber: 264/6.5 mm (.264) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-9 Delivery weight: 1.588kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 270 CALIBER 1-10 TWIST #3 CHROM MOLY BARREL
Mfr Part: 270103CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen's CONTOUR #3 BARREL for .270 caliber with a 1-10 twist is crafted for precision and quality, using a "Cold Forming" process for rifling and subjected to rigorous air-gauge and borescope inspections.
- The barrel is made from high-quality chrome moly steel, stress-relieved, and hand-lapped if stainless, ensuring uniformity and adherence to tight tolerances for optimal shooting performance.
- Special Orders for non-stock barrels require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time.
Attributes
Caliber: 270/6.8 mm (.277) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.474kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 7MM 1-9 TWIST #3 CHROME MOLY BARREL
Mfr Part: 7MM93CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
4 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen 7MM barrels are crafted for quality and performance, ensuring accuracy with meticulous attention to detail in the rifling process.
- The barrels undergo rigorous inspections, including air-gauge and borescope inspections, to meet tight tolerance and uniformity standards.
- Special orders for barrels not in stock require full payment in advance, are non-cancellable, non-refundable, and have an 8-10 week delivery time.
Attributes
Caliber: 284/7 mm (.284) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-9 Delivery weight: 1.497kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 30 CALIBER 1-10 TWIST #3 CHROME MOLY BARREL
Mfr Part: 30103CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
5 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted to high standards with uniformity and quality, using cold forming and rigorous inspections, ensuring top performance for custom firearms.
- The barrels are made from either 4140 chrome-moly or 416 stainless steel, with a #3 contour and a 1-10 twist rate for 30 caliber (.308) projectiles.
- Special orders require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time, and the barrels are not shipped prepaid.
Attributes
Caliber: 30 Caliber (.308) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.497kg Shipping height: 28mm Shipping width: 30mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 338 CALIBER 1-10 TWIST #3 CHROME MOLY BARREL
Mfr Part: 338103CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
2 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted with precision, utilizing a "Cold Forming" process and strict quality controls to ensure uniformity and accuracy.
- Each barrel is rigorously inspected with air-gauge and borescope methods to guarantee groove tolerances and stress-relief for peak performance.
- Barrels are made from high-quality materials like 4140 chrome-moly or 416 Stainless Steel, with a match-grade #3 contour and a 1-10 twist for the .338 caliber.
Attributes
Caliber: 338 Caliber (.338) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.474kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 22 CALIBER 1-14 TWIST #3 STAINLESS BARREL
Mfr Part: 224143SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
1 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted to high standards, using the "Cold Forming" process for rifling and are inspected with air-gauges and borescopes to ensure quality and performance.
- The barrels are made from either 4140 chrome-moly or 416 Stainless Steel, with features such as a #3 contour and a 1-14 twist rate for .22 caliber projectiles.
- Custom orders require full payment in advance, are non-cancelable, non-refundable, and take 8-10 weeks for delivery.
Attributes
Caliber: 22 Caliber (.223-.224) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-14 Delivery weight: 1.565kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 6MM 1-10 TWIST #3 STAINLESS BARREL
Mfr Part: 6MM103SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted with precision, using a cold forming process for rifling and are inspected with air-gauges and borescopes to ensure tight tolerances and uniformity.
- All stainless steel barrels are hand lapped at the factory, and only those meeting strict specifications are sold, ensuring high quality and performance.
- Barrels are made from either 4140 chrome-moly or 416 Stainless Steel, available in a #3 contour with a 1-10 twist for 6mm caliber, and require a special order with full payment in advance if not in stock.
Attributes
Caliber: 243/6 mm (.243) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.542kg Shipping height: 28mm Shipping width: 30mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 25 CALIBER 1-10 TWIST #3 STAINLESS BARREL
Mfr Part: 257103SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
2 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted with precision, utilizing the "Cold Forming" process for rifling and strict quality controls, ensuring high accuracy and performance.
- Each barrel is air-gauge and borescope inspected to meet tight tolerance and uniformity standards, with stainless steel barrels being hand lapped at the factory.
- Special Orders for barrels not in stock require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time.
Attributes
Caliber: 25 Caliber (.257) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.52kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 6.5MM 1-9 TWIST #3 STAINLESS BARREL
Mfr Part: 6593SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen 6.5MM barrels are crafted with precision, featuring a #3 contour, 1-9 twist rate, and are made from high-quality stainless steel to ensure accuracy and performance.
- Each barrel undergoes rigorous quality control with air-gauge and borescope inspections, ensuring groove tolerances and uniformity to maintain a high standard for both the supplier and gun builders' reputations.
- Custom orders for barrels not in stock require full payment in advance, are non-cancellable, non-refundable, and have an 8-10 week delivery time.
Attributes
Caliber: 264/6.5 mm (.264) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-9 Delivery weight: 1.565kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 270 CALIBER 1-10 TWIST #3 STAINLESS BARREL
Mfr Part: 270103SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
1 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen's CONTOUR #3 BARREL is crafted with precision, utilizing cold forming rifling for consistent accuracy and is thoroughly inspected with air-gauging and borescoping.
- The barrels are made from high-quality stainless steel, ensuring durability and performance, with a focus on maintaining tight tolerances and uniformity.
- Special orders for barrels not in stock require full payment in advance, are non-cancellable, non-refundable, and have an 8-10 week delivery time.
Attributes
Caliber: 270/6.8 mm (.277) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.451kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 7MM 1-9 TWIST #3 STAINLESS BARREL
Mfr Part: 7MM93SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
3 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are meticulously crafted with a focus on internal precision, using the "Cold Forming" process and strict quality controls to ensure superior accuracy and performance.
- The barrels undergo rigorous inspections, including air-gauge and borescope examinations, to ensure they meet tight groove tolerances and uniformity standards without any straightening or stress.
- Stainless steel barrels are hand-lapped at the factory, and only those that pass all specifications are sold, ensuring the maintenance of quality and the gun builder's reputation.
Attributes
Caliber: 284/7 mm (.284) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-9 Delivery weight: 1.52kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 30 CALIBER 1-10 TWIST #3 STAINLESS BARREL
Mfr Part: 30103SS All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
2 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen barrels are crafted with precision, utilizing the Cold Forming process and rigorous inspections to ensure uniformity and quality.
- These match-grade stainless steel barrels are designed to enhance the accuracy and reputation of custom gun builders.
- Special Orders require full payment upfront, are non-cancellable, non-refundable, and have an 8-10 week delivery time.
Attributes
Caliber: 30 Caliber (.308) Contour: #3 Material: Stainless Steel Style: Match-Grade Twist: 1-10 Delivery weight: 1.451kg Shipping height: 28mm Shipping width: 30mm Shipping length: 660mm
Item details
US export classification: 0A501.c
SHILEN 20 CALIBER 1-12 TWIST #3 CHROME MOLY BARREL
Mfr Part: 20123CM All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance.
1 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- Shilen 20 Caliber barrels are crafted with precision, utilizing the "Cold Forming" process for uniform rifling, and are thoroughly inspected with air-gauges and borescopes to ensure quality.
- Constructed from high-quality chrome moly steel or stainless steel, these barrels are stress-relieved and hand-lapped (stainless models), adhering to tight groove tolerances for superior performance.
- Special order barrels require full payment in advance, are non-cancellable and non-refundable, with an 8-10 week delivery time, emphasizing the commitment to custom quality and customer satisfaction.
Attributes
Caliber: 20 Caliber (.204) Contour: #3 Material: Chrome Moly Steel Style: Match-Grade Twist: 1-12 Delivery weight: 1.656kg Shipping height: 28mm Shipping width: 28mm Shipping length: 660mm
Item details
US export classification: 0A501.c
Discover the precision of the CONTOUR #3 Barrel by Shilen. 🛠️ Crafted from chrome moly steel for unmatched accuracy in your firearm.
SPECS: 4140 chrome-moly or 416 Stainless Steel. METRIC: 1 " (2.5cm), 1 lb. (.45kg).
Special Orders: If no Stock # is shown in the chart, that barrel must be ordered on a Special Order basis. Special Orders require Full Payment in Advance and are non-cancelable and non-refundable. Allow 8-10 weeks for delivery. Not shipped prepaid.
Classical view
Mobile view