Help and contact
(0) Basket
Newsletter
Home
Optics & Mounting
Rings, Mounts & Bases
Handgun Bases
EGW WALTHER 22 VORTEX VIPER/VENOM SIGHT MOUNT
Support
EGW
WALTHER 22 VORTEX VIPER/VENOM SIGHT MOUNT
69.9
69.9
1
GBP
Sale
Product no.: 296000654
EGW SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS WALTHER 1911-22 BLK
Mfr Part: 49302 841370115709 EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
EGW SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS WALTHER 1911-22 BLK
Mfr Part: 49302 841370115709 EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Specs:
Color: Black
Make: Walther
Material: Aluminum
Model: P22
Number of Bases: 1-Piece
Style: Tactical
Upgrade your Walther 1911-22 with the EGW Sight Mount for Vortex Viper/Venom. Easy install 🔧, no alterations needed, and hardware included!
Classical view
Mobile view