Your basket is empty.

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

VOLQUARTSEN
FIRING PIN & EXACT EDGE EXTRACTOR

810162012687 930000125

Description
Ratings (3)

Fits Ruger® MKI, MKII™, & MKIII™ including 22/45™. Firing pin sold with extractor or available separately. Firing Pin EDM machined from A2 tool steel Minimizes/eliminates light hits Firing pin strike face is surface ground Firing pin is .004" wider than factory pin, new width helps eliminate side-to-side movement Hardened to RC56-58 to prevent deformation Extractor EDM machined from A2 tool steel Allows for exact tolerances Will not lose edge under impact Precise hook point is hardened to RC58-60

More...

Customer ratings for VOLQUARTSEN FIRING PIN & EXACT EDGE EXTRACTOR

Number of ratings: 3
From brownells.com: 3
Average rating: 3

Works Great! (22/04/2012)

My Ruger Mark iii is now reliable, no more light strikes and FTEs.

Nice finish but Extractor still snapped (21/12/2015)

I have 4 Ruger Mark III pistols and they all have Volquartsen firing pins and extractors, that is until the one in my Competition Target snapped in two after just about 200 rounds. I installed Volquartsen brand parts because I believed them to be superior to the originals. No problems at all with the firing pins. Volquartsen does a nice job of finishing their products, but I actually haven't noticed an improvement in performance over the Ruger original parts. I think these parts will eventually last longer than the Ruger originals, but having one break so early in its life makes me wonder. I am not sure I can now recommend these parts because this type of failure represents to me a quality control deficiency, unfortunately. I'll just have to see how the other extractors hold up.

0 for 2 on Volquartsen Extractor (24/03/2016)

See my earlier Dec 2015 post on this very item. The replacement Volquartsen Exact Edge Extractor also broke at the same spot as the first one. I put this 2nd extractor in my Ruger Mark III Hunter. The first one was used in the Mark III Competition Target. In both cases, the extractor sheared off at the 90 degree turning point at the opposite end of the claw. I just did not expect this disappointment from a Volquartsen product. Both extractors failed after only several hundred .22LR rounds. I'll be going back to Ruger original extractors. No problems yet with their firing pin.

Read 3 more ratings on brownells.com

49.9 59.9 2 GBP

Product no.: 930000125
VOLQUARTSEN FIRING PIN & EXACT EDGE EXTRACTOR
Mfr Part: VC3FE 810162012687 Fits Ruger MKI, MKII, & MKIII including 22/45. Firing pin sold with extractor or available separately.Firing Pin EDM machined from A2 tool steel Minimizes/eliminates light hits Firing pin strike face is surface ground Firing pin is .004" wider than factory pin, new width helps eliminate side-to-side movement Hardened to RC56-58 to prevent deformationExtractor EDM machined from A2 tool steel Allows for exact tolerances Will not lose edge under impact Precise hook point is hardened to RC58-60

59.9 GBP 0 £59.90 *

Is a 'Call to order' product.

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Caliber: 22 Caliber (.223-.224) Make: Ruger Model: Mark III, Mark I, Mark II, 22/45

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Restrictions

Is a 'Call to order' product.

Top takeaways

The VOLQUARTSEN Firing Pin & Exact Edge Extractor are designed to fit Ruger MKI, MKII, & MKIII including 22/45.
The firing pin is EDM machined from A2 tool steel, is .004" wider than the factory pin to minimize movement, and is hardened to RC56-58.
The extractor is also EDM machined from A2 tool steel, maintains exact tolerances, and has a precise hook point hardened to RC58-60.

Description

Fits Ruger MKI, MKII, & MKIII including 22/45. Firing pin sold with extractor or available separately.Firing Pin EDM machined from A2 tool steel Minimizes/eliminates light hits Firing pin strike face is surface ground Firing pin is .004" wider than factory pin, new width helps eliminate side-to-side movement Hardened to RC56-58 to prevent deformationExtractor EDM machined from A2 tool steel Allows for exact tolerances Will not lose edge under impact Precise hook point is hardened to RC58-60

Attributes

Caliber: 22 Caliber (.223-.224) Make: Ruger Model: 22/45,Mark I,Mark II,Mark III Delivery weight: 0.014kg Shipping height: 8mm Shipping width: 71mm Shipping length: 86mm UPC : 810162012687

Item details

Made in USA
US export classification: 0A501.x

Product no.: 930000126
VOLQUARTSEN SURESTRIKE FIRING PIN
Mfr Part: VC2SSFP 810162012748 Fits Ruger® MKI, MKII™, & MKIII™ including 22/45™. Firing pin sold with extractor or available separately. Firing Pin EDM machined from A2 tool steel Minimizes/eliminates light hits Firing pin strike face is surface ground Firing pin is .004" wider than factory pin, new width helps eliminate side-to-side movement Hardened to RC56-58 to prevent deformation Extractor EDM machined from A2 tool steel Allows for exact tolerances Will not lose edge under impact Precise hook point is hardened to RC58-60

49.9 GBP 0 £49.90 *

Is a 'Call to order' product.

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Caliber: 22 Caliber (.223-.224) Make: Ruger Model: Mark III, Mark I, Mark II, 22/45, MK IV

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Restrictions

Is a 'Call to order' product.

Top takeaways

The Volquartsen SureStrike Firing Pin is designed for Ruger® MKI, MKII™, & MKIII™, including 22/45™ and is made from A2 tool steel for minimized light hits.
It features a .004" wider pin to reduce side-to-side movement and is surface ground for a precise hit, hardened to RC56-58 to prevent deformation.
The Exact Edge Extractor, also EDM machined from A2 tool steel, maintains exact tolerances, will not lose its edge under impact, and has a hook point hardened to RC58-60.

Attributes

Caliber: 22 Caliber (.223-.224) Make: Ruger Model: 22/45,MK IV,Mark I,Mark II,Mark III Delivery weight: 0.014kg Shipping height: 15mm Shipping width: 71mm Shipping length: 89mm UPC : 810162012748