Help and contact
(0) Basket
Newsletter
TRIEBEL
Full Length Die 1 1/4
159.9
364.9
68
GBP
Product no.: EU2013033
Full Length Die 300 Wea Mag
Mfr Part: 3292811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 300 Wea Mag
Mfr Part: 3292811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012994
Full Length Die 5,6x57
Mfr Part: 3026011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 5,6x57
Mfr Part: 3026011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012995
Full Length Die 5,6x61 S.E.v.H.
Mfr Part: 3026811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 5,6x61 S.E.v.H.
Mfr Part: 3026811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012996
Full Length Die 224 Wea Mag
Mfr Part: 3070811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 224 Wea Mag
Mfr Part: 3070811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012997
Full Length Die 6x62 Frères
Mfr Part: 3085611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6x62 Frères
Mfr Part: 3085611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012998
Full Length Die 6x70 R
Mfr Part: 3086811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6x70 R
Mfr Part: 3086811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2012999
Full Length Die 6mm BR Rem
Mfr Part: 3088011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6mm BR Rem
Mfr Part: 3088011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013000
Full Length Die 6mm Dasher
Mfr Part: 3088311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6mm Dasher
Mfr Part: 3088311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013001
Full Length Die 6mm PPC-USA
Mfr Part: 3096411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6mm PPC-USA
Mfr Part: 3096411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013002
Full Length Die 257 Wea Mag
Mfr Part: 3143611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 257 Wea Mag
Mfr Part: 3143611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013003
Full Length Die 6,5x50 R Reb
Mfr Part: 3148411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x50 R Reb
Mfr Part: 3148411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013004
Full Length Die 6,5x52 R
Mfr Part: 3150011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x52 R
Mfr Part: 3150011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013005
Full Length Die 6,5x54 M-Sch
Mfr Part: 3152811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x54 M-Sch
Mfr Part: 3152811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013006
Full Length Die 6,5x54 Mauser
Mfr Part: 3153211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x54 Mauser
Mfr Part: 3153211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013007
Full Length Die 6,5x57
Mfr Part: 3154011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x57
Mfr Part: 3154011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013008
Full Length Die 6,5x64
Mfr Part: 3157211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x64
Mfr Part: 3157211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013009
Full Length Die 6,5x64 Brenneke
Mfr Part: 3157611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x64 Brenneke
Mfr Part: 3157611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013010
Full Length Die 6,5x65 RWS
Mfr Part: 3158411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x65 RWS
Mfr Part: 3158411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013011
Full Length Die 6,5x68
Mfr Part: 3159611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x68
Mfr Part: 3159611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013012
Full Length Die 6,5x68 R
Mfr Part: 3160411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5x68 R
Mfr Part: 3160411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013013
Full Length Die 6,5 PRC
Mfr Part: 3167011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5 PRC
Mfr Part: 3167011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013014
Full Length Die 6,5-284 Norma
Mfr Part: 3172811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 6,5-284 Norma
Mfr Part: 3172811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013015
Full Length Die 7x57
Mfr Part: 3193611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7x57
Mfr Part: 3193611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013016
Full Length Die 7x64
Mfr Part: 3196411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7x64
Mfr Part: 3196411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013017
Full Length Die 7mm SE v.H.
Mfr Part: 3197211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm SE v.H.
Mfr Part: 3197211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013018
Full Length Die 7mm Blaser Mag
Mfr Part: 3199811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm Blaser Mag
Mfr Part: 3199811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013019
Full Length Die 7mm PRC
Mfr Part: 3209011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm PRC
Mfr Part: 3209011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013020
Full Length Die 7mm Rem Mag
Mfr Part: 3209211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm Rem Mag
Mfr Part: 3209211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013021
Full Length Die 7mm Rem SAUM
Mfr Part: 3209311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm Rem SAUM
Mfr Part: 3209311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
274.9
GBP
0
£274.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013022
Full Length Die 7mm WSM
Mfr Part: 3212611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm WSM
Mfr Part: 3212611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013023
Full Length Die 7mm STW
Mfr Part: 3213611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm STW
Mfr Part: 3213611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
274.9
GBP
0
£274.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013024
Full Length Die 7mm Wea Mag
Mfr Part: 3216011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm Wea Mag
Mfr Part: 3216011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013025
Full Length Die 7mm-08 Rem
Mfr Part: 3218411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7mm-08 Rem
Mfr Part: 3218411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013026
Full Length Die 270 Wea Mag
Mfr Part: 3225211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 270 Wea Mag
Mfr Part: 3225211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013027
Full Length Die 270 WSM
Mfr Part: 3226211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 270 WSM
Mfr Part: 3226211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013028
Full Length Die 284 Win
Mfr Part: 3239211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 284 Win
Mfr Part: 3239211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013029
Full Length Die 7,62x39
Mfr Part: 3248411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 7,62x39
Mfr Part: 3248411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013030
Full Length Die 300 Pegasus
Mfr Part: 3289411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 300 Pegasus
Mfr Part: 3289411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013031
Full Length Die 300 PRC
Mfr Part: 3290011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 300 PRC
Mfr Part: 3290011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013032
Full Length Die 300 Rem Ultra Mag.
Mfr Part: 3292211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 300 Rem Ultra Mag.
Mfr Part: 3292211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013034
Full Length Die 300 WSM
Mfr Part: 3293411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 300 WSM
Mfr Part: 3293411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013035
Full Length Die 303 British
Mfr Part: 3293611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 303 British
Mfr Part: 3293611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013036
Full Length Die 8x60 S
Mfr Part: 3323611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 8x60 S
Mfr Part: 3323611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013037
Full Length Die 8x64 S
Mfr Part: 3326011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 8x64 S
Mfr Part: 3326011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013038
Full Length Die 8x75 RS
Mfr Part: 3330411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 8x75 RS
Mfr Part: 3330411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013039
Full Length Die 8,5x63
Mfr Part: 3374811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 8,5x63
Mfr Part: 3374811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013040
Full Length Die 338 Blaser Mag
Mfr Part: 3382911 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 Blaser Mag
Mfr Part: 3382911 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013041
Full Length Die 338 Federal
Mfr Part: 3383511 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 Federal
Mfr Part: 3383511 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013042
Full Length Die 338 Norma Mag
Mfr Part: 3384211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 Norma Mag
Mfr Part: 3384211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013043
Full Length Die 338 RCM
Mfr Part: 3385111 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 RCM
Mfr Part: 3385111 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013044
Full Length Die 338 Rem Ultra Mag
Mfr Part: 3385311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 Rem Ultra Mag
Mfr Part: 3385311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013045
Full Length Die 338 Win Mag
Mfr Part: 3385611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 338 Win Mag
Mfr Part: 3385611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013046
Full Length Die 350 Mag Rigby
Mfr Part: 3439211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 350 Mag Rigby
Mfr Part: 3439211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013047
Full Length Die 358 Win
Mfr Part: 3445611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 358 Win
Mfr Part: 3445611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013048
Full Length Die 9,3x64 Br
Mfr Part: 3459611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 9,3x64 Br
Mfr Part: 3459611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013049
Full Length Die 9,3x74 R
Mfr Part: 3463211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 9,3x74 R
Mfr Part: 3463211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
159.9
GBP
0
£159.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013050
Full Length Die 375 Blaser Mag
Mfr Part: 3471811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 375 Blaser Mag
Mfr Part: 3471811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013051
Full Length Die 378 Wea Mag
Mfr Part: 3484411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 378 Wea Mag
Mfr Part: 3484411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013052
Full Length Die 450/400 NE 3"
Mfr Part: 3535611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 450/400 NE 3"
Mfr Part: 3535611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013053
Full Length Die 416 Rem Mag
Mfr Part: 3562411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 416 Rem Mag
Mfr Part: 3562411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013054
Full Length Die 416 Rigby
Mfr Part: 3562811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 416 Rigby
Mfr Part: 3562811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013055
Full Length Die 10,75x68
Mfr Part: 3572411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 10,75x68
Mfr Part: 3572411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013056
Full Length Die 45-70 Gov't
Mfr Part: 3645211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 45-70 Gov't
Mfr Part: 3645211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013057
Full Length Die 458 Lott
Mfr Part: 3678011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 458 Lott
Mfr Part: 3678011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
199.9
GBP
0
£199.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013058
Full Length Die 470 NE
Mfr Part: 3694011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 470 NE
Mfr Part: 3694011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013059
Full Length Die 500 NE 3''
Mfr Part: 3718011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 500 NE 3''
Mfr Part: 3718011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
239.9
GBP
0
£239.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013060
Full Length Die 600 NE
Mfr Part: 3736411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 600 NE
Mfr Part: 3736411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
309.9
GBP
0
£309.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Product no.: EU2013061
Full Length Die 700 H&H NE
Mfr Part: 3738411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
Full Length Die 700 H&H NE
Mfr Part: 3738411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
364.9
GBP
0
£364.90
*
Will be procured from the supplier after your order
Delivery time approx. 4-12 weeks.
Delivery time approx. 4-12 weeks.
Specs:
Thread: 1 1/4
Achieve perfect sizing with the TRIEBEL Full Length Die 1 1/4 for 300 Wea Mag. 🔧 Easy calibration and replacement parts make reloading a breeze!
Classical view
Mobile view