Help and contact
(0) 
Newsletter
RIFLESPEED
GAS CONTROL REBUILD KITS
RIFLESPEED GAS CONTROL REBUILD KIT #0 0.917"
Mfr Part: US0133 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
2 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The kit includes a Plunger of selectable sizes, 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws.
- Rebuild is advised when changing barrels or after 10,000 to 25,000 rounds, based on usage.
- To choose the correct Plunger size, measure the existing one or consult the Common Configurations and Settings chart on the Technical Documents page.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #1 0.927"
Mfr Part: US0134 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
1 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The kit includes a Plunger, 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws for Riflespeed Gas Control rebuilds.
- Rebuilds are recommended when changing barrels or after 10,000 to 25,000 rounds fired, depending on usage.
- Plunger sizes vary; measure the old plunger or consult the Common Configurations and Settings chart to choose the correct size.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #2 0.937"
Mfr Part: US0135 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The RIFLESPEED Gas Control Rebuild Kit #2 includes a Plunger, Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and Set Screws.
- Rebuild is recommended when replacing barrels or after 10,000 to 25,000 rounds, depending on firing frequency.
- Plunger size should be measured or determined using the Common Configurations and Settings chart from the Technical Documents.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #3 0.947"
Mfr Part: US0136 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
5 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The GAS CONTROL REBUILD KIT #3 includes a Plunger, 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws.
- Rebuild is recommended when replacing barrels or after 10,000 to 25,000 rounds to maintain optimal performance.
- Plunger sizes vary; measure the old plunger or consult the Common Configurations and Settings chart to select the correct size.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #4 0.957"
Mfr Part: US0137 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
6 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The kit is designed for rebuilding Riflespeed Gas Controls and includes a Plunger, Wave Spring, Roll Pin, Cross Pin, and Set Screws.
- Rebuilding is recommended when replacing barrels or after 10,000 to 25,000 rounds, depending on firing frequency.
- Plunger sizes vary, and the correct size can be determined by measuring the old plunger or consulting the Technical Documents page.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #5 0.967"
Mfr Part: US0138 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
6 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The kit is for rebuilding Riflespeed Gas Controls and includes a Plunger, Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and Set Screws.
- Rebuild is advised when changing barrels or after 10,000 to 25,000 rounds, depending on usage.
- Plunger sizes vary and should be measured or determined using the Common Configurations and Settings chart from the Technical Documents.
Attributes
Delivery weight: 0.005kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
RIFLESPEED GAS CONTROL REBUILD KIT #6 0.979"
Mfr Part: US0139 Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.
6 pcs. in the USA warehouse
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The kit includes a Plunger, 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws for rebuilding Riflespeed Gas Controls.
- Rebuilding is advised when changing barrels or after 10,000 to 25,000 rounds to maintain optimal performance.
- Plunger sizes vary; measure the old plunger or consult the Technical Documents for the correct size.
Attributes
Delivery weight: 0.045kg Shipping height: 6mm Shipping width: 102mm Shipping length: 127mm
Item details
US export classification: 0A501.x
Upgrade your Riflespeed Gas Control with our OEM Rebuild Kit! 🔧 Includes essential components for reliable performance. Perfect for maintenance!
Classical view
Mobile view