Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
SPECS: 145mm long. (Approximately 5¾".)
More...
Customer ratings for FRIEDR. DICK GMBH NO. 137 ROUND NOSE
Number of ratings: 4
From brownells.com: 4
Average rating: 5
Would buy this product again(14/10/2009)
Excellent quality,A little pricey,but very well made..Perfect size for any range or cleaning box.The jaws are even the full length and come together so well that they will grab and hold a single sheet of paper!
Ideal gun box tool(25/06/2011)
Easily clears the chamber area of stuck rounds without damaging the working parts.
Bought for Glock magazine catch spring(23/06/2016)
Removing the Glock magazine catch spring can be a bear without the right needle nose pliers. This unit works great, especially on the sub-compacts like the Glock 26. While I purchased this tool with that specific purpose in mind, I'm sure I'll find numerous other uses for it. Obviously quality built; already ordered the straight nose and may get the other two also.
Super handy(10/04/2012)
These things are great for delicate fine work. They are very slender nosed, so you can reach inside small springs and recesses to grab stuff. But they seem to be very strong, although I'm not going to push my luck! This is one tool that has earned a permanent spot on my bench
Product no.: 249130137 FRIEDR. DICK GMBH NO. 137 ROUND NOSE Mfr Part: 40137240 Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
Product no.: 249130134 FRIEDR. DICK GMBH NO. 134 FLAT NOSE Mfr Part: 40134240 Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
GERMAN MADE SPECIAL GUNSMITHING PLIERS are versatile tools essential for various delicate and rough tasks, from inserting tiny springs to holding hot rods.
Constructed with strong box construction for greater strength and stable joints, ensuring durability and reliability during twisting and turning operations.
FRIEDR. DICK GMBH guarantees the quality and service of their polished steel pliers, adhering to their long-standing slogan, "First Quality and Then Price".
Product no.: 249150154 FRIEDR. DICK GMBH NO. 154 CURVED NEEDLE Mfr Part: 40154240 Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
Product no.: 249150153 FRIEDR. DICK GMBH NO. 153 STRAIGHT NEEDLE Mfr Part: 40153240 Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
Perhaps no other tool on the bench is required to do more jobs than the Gunsmith's pliers - everything from getting up inside a small action and inserting a spring the size of a small hair, to holding red-hot rods while being formed. Because of the extremely rough, to extremely delicate, work done with pliers, just being tools isn't enough; they must be instruments.These pliers are manufactured by a company that has long specialized in QUALITY - respected for generations.They are of strong box construction. This gives the pliers greater strength and prevents loosening of the joints when doing twisting and turning operations. Finish: Polished steel jaws and joints.Each tool is guaranteed for quality and service. The manufacturer's slogan since 1824 has always been, "First Quality and Then Price". This manufacturing policy is of greater importance to the craftsman today than ever before.
SPECS: 145mm long. (Approximately 5¾".)
More...
Customer ratings for FRIEDR. DICK GMBH NO. 137 ROUND NOSE
Number of ratings: 4
From brownells.com: 4
Average rating: 5
Would buy this product again(14/10/2009)
Excellent quality,A little pricey,but very well made..Perfect size for any range or cleaning box.The jaws are even the full length and come together so well that they will grab and hold a single sheet of paper!
Ideal gun box tool(25/06/2011)
Easily clears the chamber area of stuck rounds without damaging the working parts.
Bought for Glock magazine catch spring(23/06/2016)
Removing the Glock magazine catch spring can be a bear without the right needle nose pliers. This unit works great, especially on the sub-compacts like the Glock 26. While I purchased this tool with that specific purpose in mind, I'm sure I'll find numerous other uses for it. Obviously quality built; already ordered the straight nose and may get the other two also.
Super handy(10/04/2012)
These things are great for delicate fine work. They are very slender nosed, so you can reach inside small springs and recesses to grab stuff. But they seem to be very strong, although I'm not going to push my luck! This is one tool that has earned a permanent spot on my bench