Superior Scope-To-Ring Contact With A Slim-Line Look
HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925" (23.5mm).
More...
Customer ratings for TPS PRODUCTS HRT ALUMINUM RINGS 1" MEDIUM
Number of ratings: 3
From brownells.com: 3
Average rating: 5
Excellent product (23/03/2017)
Excellent machine work. Quality feel. Easy to install.
Great rings, you do get what you pay for(14/05/2011)
I've used TPS rings in the past. But switched to another brand with inserts so the scope doesn't get marred. But I ran into a problem with a flat top carbine. Tried two name brand mounts specifically for the 223. But ran out of windage adjustment trying to zero. Even tried a pair of windage adjustable rings, but ended up binding the scope. So I didn't even try to mount it using them. My last resort was with the TPS rings. They are on the money with close tolerances. After flipping the rings with the scope loosely mounted found the sweet spot. When I tightened everything up, My scope was laser sighted at optical zero for windage. Sometimes paying the extra money does make a huge difference in what you get.
Excellent for the price(27/07/2010)
Use: Target shooting w/ 300 Win mag.
Have purchased more expensive rings and if this product was around back then I would of gotten them.
Product no.: 100001476 TPS PRODUCTS HRT ALUMINUM RINGS 1" MEDIUM Mfr Part: 40521071611405218 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision machined from alloy steel with extremely tight tolerances for maximum scope-to-ring contact and secure hold against recoil.
Features a four-screw cap design for easy reticle alignment and a large clamp-nut for firm attachment to Weaver-type or Picatinny bases.
The rings have a sleek design with radiused edges and corners to prevent snagging, finished in matte blue, and are compatible with 1" scope tube diameter.
Product no.: 100036958 TPS PRODUCTS HRT STEEL RINGS 30MM S-LOW Mfr Part: 32470 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
Product no.: 100001474 TPS PRODUCTS HRT STEEL RINGS 1" MEDIUM Mfr Part: 40501071611405010 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision machined from alloy steel billet to .0002" tolerances for maximum scope-to-ring contact and secure recoil resistance.
The four-screw cap design allows for easy reticle alignment without scope rotation by tightening one side at a time.
Designed for compatibility with Weaver-type or Picatinny bases, these rings feature a large clamp-nut for secure mounting and a sleek matte blue finish.
Product no.: 100001475 TPS PRODUCTS HRT STEEL RINGS 1" HIGH Mfr Part: 40502071611405027 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision-machined from an alloy steel billet to ensure maximum contact and a secure hold on the scope, even against strong recoil.
The four-screw cap design allows for easy alignment of the scope's reticle without rotation during tightening, ensuring accuracy and reliability.
Designed for compatibility with Weaver-type or Picatinny bases, these rings feature a large clamp-nut for secure mounting and radiused edges to prevent snagging.
Product no.: 100001478 TPS PRODUCTS HRT STEEL RINGS 30MM MEDIUM Mfr Part: 40571071611405713 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
Product no.: 100001479 TPS PRODUCTS HRT STEEL RINGS 30MM HIGH Mfr Part: 40572071611405720 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision machined from alloy steel with extremely tight tolerances for maximum scope-to-ring contact and secure recoil resistance.
The four-screw cap design allows for easy reticle alignment without scope rotation and the clamp-nut ensures secure attachment to Weaver-type or Picatinny bases.
These tactical rings have a matte blue finish, with a 30mm scope tube diameter and a high profile measuring 1.225 inches from the base to the center of the ring.
Product no.: 100001477 TPS PRODUCTS HRT ALUMINUM RINGS 1" HIGH Mfr Part: 40522071611405225 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision-machined from an alloy steel billet to extremely tight tolerances for maximum scope-to-ring contact and secure recoil resistance.
The rings feature a four-screw cap design for easy reticle alignment and a large clamp-nut for strong attachment to Weaver-type or Picatinny bases.
They have a sleek design with radiused edges to prevent snagging, a matte blue finish, and are compatible with 1" scope tube diameters.
Product no.: 100001480 TPS PRODUCTS HRT ALUMINUM RINGS 30MM MEDIUM Mfr Part: 40581071611405812 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are machined from alloy steel billet to .0002" tolerances for maximum scope-to-ring contact and secure recoil resistance.
Features a four-screw cap design for easy reticle alignment and a large clamp-nut for firm attachment to Weaver-type or Picatinny bases.
Constructed with radiused edges to prevent snagging and finished in Matte Blue, these 30mm medium height rings offer both functionality and aesthetics.
Product no.: 100001481 TPS PRODUCTS HRT ALUMINUM RINGS 30MM HIGH Mfr Part: 40582071611405829 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
Product no.: 100020410 TPS PRODUCTS HRT ALUMINUM RINGS 1" LOW Mfr Part: 40520071611405201 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are machined with extreme precision to .0002" for maximum scope-to-ring contact and secure hold against recoil.
Features a four-screw cap design for easy reticle alignment without scope rotation and a large clamp-nut for firm attachment to Weaver or Picatinny bases.
Constructed from alloy steel with a black oxide finish, these low-profile rings measure .785'' in height and fit 1" scope tube diameters.
Product no.: 100020411 TPS PRODUCTS HRT ALUMINUM RINGS 1" X-HIGH Mfr Part: 40523071611405232 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision machined from alloy steel with extremely tight tolerances for maximum scope-to-ring contact and secure recoil resistance.
Features a four-screw cap design for easy reticle alignment and a large clamp-nut for secure attachment to Weaver-type or Picatinny bases.
Constructed with radiused edges and corners to prevent snagging, and finished with black oxide to Mil-C-13924 standards for an attractive appearance and durability.
Product no.: 100020412 TPS PRODUCTS HRT ALUMINUM RINGS 30MM LOW Mfr Part: 40580071611405805 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings offer precise alignment with tolerances held to .0002", ensuring maximum scope-to-ring contact and a secure hold against recoil.
Features a four-screw cap design for easy reticle alignment, with a separate tightening process for each side to prevent scope rotation during installation.
Constructed with a black oxide finish to Mil-C-13924 standards, these low-profile aluminum rings fit 30mm scope tubes and attach to Weaver-type or Picatinny bases.
Product no.: 100020408 TPS PRODUCTS HRT STEEL RINGS 1" LOW Mfr Part: 40500071611405003 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
Product no.: 100036959 TPS PRODUCTS HRT ALUMINUM RINGS 30MM S-LOW Mfr Part: 32480071611324809 HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
HRT Series Rings are precision-machined from alloy steel with extremely tight tolerances for maximum scope-to-ring contact and secure hold against recoil.
Features a four-screw cap design to facilitate reticle alignment without scope rotation and a large clamp-nut for secure attachment to Weaver-type or Picatinny bases.
These rings have a matte blue finish, are .820'' in height, and are designed for 30mm scope tube diameters, ensuring a low-profile setup for tactical applications.
Superior Scope-To-Ring Contact With A Slim-Line Look
HRT Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-type or Picatinny bases.
SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925" (23.5mm).
More...
Customer ratings for TPS PRODUCTS HRT ALUMINUM RINGS 1" MEDIUM
Number of ratings: 3
From brownells.com: 3
Average rating: 5
Excellent product (23/03/2017)
Excellent machine work. Quality feel. Easy to install.
Great rings, you do get what you pay for(14/05/2011)
I've used TPS rings in the past. But switched to another brand with inserts so the scope doesn't get marred. But I ran into a problem with a flat top carbine. Tried two name brand mounts specifically for the 223. But ran out of windage adjustment trying to zero. Even tried a pair of windage adjustable rings, but ended up binding the scope. So I didn't even try to mount it using them. My last resort was with the TPS rings. They are on the money with close tolerances. After flipping the rings with the scope loosely mounted found the sweet spot. When I tightened everything up, My scope was laser sighted at optical zero for windage. Sometimes paying the extra money does make a huge difference in what you get.
Excellent for the price(27/07/2010)
Use: Target shooting w/ 300 Win mag.
Have purchased more expensive rings and if this product was around back then I would of gotten them.