Your basket is empty.

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

851100014

Description
Ratings (7)

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

More...

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Number of ratings: 7
From brownells.com: 7
Average rating: 3.9

Great Product (22/12/2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08/03/2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19/10/2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11/04/2014)

I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners

Disappointing (08/08/2015)

Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit â¦ that is not clear from the description, or pictures, on the web site.

The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.

Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.

VERY DISAPPOINTED (03/11/2016)

Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.

<img width="500" src='/userdocs/reviewimages/275fafcf-230a-4720-a9c5-6e5bf85ca88b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/568e58d2-9d4c-40c6-907a-24590b601435.jpg' alt=''>

Settled down the recoil (17/11/2017)

I've got this on my Springfield standard M1A.

Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.

The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.

Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!

Read 7 more ratings on brownells.com

229.9 229.9 1 GBP

Product no.: 851100014
SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE
Mfr Part: 2001 Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.

229.9 GBP 29 £229.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Caliber: 30 Caliber (.308) Finish: Manganese Phosphate Make: Springfield Material: Stainless Steel Model: M14, M1A Size: .862 Threads: .595-32

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Provides muzzle control and significantly reduces felt recoil without gunsmithing, facilitating more practice time with high-power rifles.
Directly replaces the standard issue flash hider on Springfield M14/M1A rifles and includes necessary components like the front sight dovetail and castle nut set screw.
Constructed from stainless steel with a manganese phosphate finish, measuring 3 inches long and .862 inches in diameter, and weighing 4.3 ounces.

Attributes

Caliber: 30 Caliber (.308) Finish: Manganese Phosphate Make: Springfield Material: Stainless Steel Model: M14,M1A Size: .862 Threads: .595-32 Delivery weight: 0.136kg Shipping height: 23mm Shipping width: 25mm Shipping length: 94mm

Item details

Made in USA

Enhance your shooting with the SPRINGFIELD M14 Muzzle Brake! 🎯 Enjoy reduced recoil and improved control, no gunsmithing required.

Description
Ratings (7)

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

More...

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Number of ratings: 7
From brownells.com: 7
Average rating: 3.9

Great Product (22/12/2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08/03/2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19/10/2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11/04/2014)

Disappointing (08/08/2015)

VERY DISAPPOINTED (03/11/2016)

Settled down the recoil (17/11/2017)

Read 7 more ratings on brownells.com

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Top takeaways

Attributes

Item details

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Connect

Secure payment methods

Trade Associations

Welcome!

SMITH ENTERPRISE SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Top takeaways

Attributes

Item details

Customer ratings for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Connect

Secure payment methods

Trade Associations

Welcome!

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER