Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Bolt Parts
Extractor Parts
Extractor Springs
SPRINCO USA M16/M4 EXTRACTOR SPRING UPGRADE KITS
Support
SPRINCO USA
M16/M4 EXTRACTOR SPRING UPGRADE KITS
12.9
23.9
4
GBP
Product no.: 943000059
SPRINCO USA UPGRADE TRIPLE KIT-3)HD 5COIL EXTRACTOR SPRG/INSERT/O-RING
Mfr Part: 26203 657780262038 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
SPRINCO USA UPGRADE TRIPLE KIT-3)HD 5COIL EXTRACTOR SPRG/INSERT/O-RING
Mfr Part: 26203 657780262038 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
Product no.: 943000058
SPRINCO USA UPGRADE KIT- XP 5-COIL EXTRACTOR SPRING, INSERT, O-RING
Mfr Part: 26201 657780262014 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
SPRINCO USA UPGRADE KIT- XP 5-COIL EXTRACTOR SPRING, INSERT, O-RING
Mfr Part: 26201 657780262014 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
Product no.: 943000061
SPRINCO USA UPGRADE TRIPLE KIT-3)4-COIL EXTRACTOR SPRING, INSERT,O-RING
Mfr Part: 26403 657780264032 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
SPRINCO USA UPGRADE TRIPLE KIT-3)4-COIL EXTRACTOR SPRING, INSERT,O-RING
Mfr Part: 26403 657780264032 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
Product no.: 943000060
SPRINCO USA UPGRADE KIT-4-COIL EXTRACTOR SPRING, INSERT, O-RING
Mfr Part: 26401 657780264018 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
SPRINCO USA UPGRADE KIT-4-COIL EXTRACTOR SPRING, INSERT, O-RING
Mfr Part: 26401 657780264018 Sprinco’s Extractor Springs are made of chrome silicon wirestock that has been heat treated, stress relieved, and cryogenic processing post winding. The springs are also plated with re-micronized molybdenum disulfide formulation. ADVANTAGES: XP 5-Coil spring has a heavier spring load than OEM springs, thus negating the need for a D-Fender™ ring or adding CRANE Viton O-Rings Use 5-Coil spring with either black extractor spring insert OR CRANE Viton O-Rings, but not both Enhanced 4-Coil springs maintain an extended duty cycle load of a NEW Mil-Spec spring and is recommended for use in 18""+BBL lengths for those who retrieve their brass for reloading While the XP 5-Coil spring is totally reliable for all 5.56 BBL lengths, it can be aggressive on case rims in 18""+length BBL rifles, and may be too strong for some bolts with extremely tight bolt face tolerances Extreme duty cycles provided while maintaining performance specifications Unaffected by heat up to 750°F D-Fender™ rings are NOT recommended for use with our 5-Coil extractor springs. Dual spring XP .308 extractor spring sets may be used with or without CRANE O-rings. May be required for use in DPMS G2 Bolts for full-auto use. Plug & play - May easily be the only extractor springs needed for the life of your bolt!!
Upgrade your firearm with Sprinco's M16/M4 Extractor Spring Kit! 💪 Enhanced performance and reliability for all your shooting needs.
Reordered
£8.90
£8.90 - £15.90
Classical view
Mobile view