876430004983 Distributes recoil on heavy magnums. Heavy-walled tube goes inside the stock, secures between two bolts with specially designed heads. With sharp, squared edges for clean inletting. Finish to match stock contours.
Distributes recoil on heavy magnums. Heavy-walled tube goes inside the stock, secures between two bolts with specially designed heads. With sharp, squared edges for clean inletting. Finish to match stock contours.
Attributes
Weapon type:Universal Rifles
Delivery weight:0.032kg
Shipping height:8mm
Shipping width:5mm
Shipping length:76mm
UPC:876430004983
Item details
Made in USA
US export classification: 0A501.x
Customers reviews
Customer ratings (5)
4 / 5
Definitely recommended
Dandy 26/06/2017
Several comments regarding lack of a wrench available. This does not use the Mauser wrench. However stop by the auto parts store with a cross bolt and you will find a pair of snap ring pliers work quite well.
Definitely recommended
great to use 24/11/2010
Very good product. I have fitted these in cliets stocks. Works just as well as the K98 cross bolts. Its just a shame they don't do them in stainless steel aswell. If you havent got the right tool to fit them, then "C" clip pliers work well.
Recommended
Just what I needed! 14/10/2010
I purchased this product to repace a missing rear crossbolt on a Russian SKS rifle. It's a perfect fit, though I might need to thin the head a little.
As for the proper tool to use, I was able to a the cheap SKS crossbolt tool. They're typically sold by a number of folks, but not Brownells.
Recommended
Great Value 26/02/2010
I was pleased with the quality and low cost. You will need a 1/4" drill, a 7/16" counterbore with 1/4" pilot to machine the stock. Strongly recommend doing this work in a milling machine. Did not see a spanner wrench to fit this crossbolt, so I made a simple T-handle spanner out of 7/16" round stock. Drilled the spanner pins at 9/32" (.2812) and made the pins out of .075 pin stock.
Slightly recommend
A Little Disappointed 28/12/2009
I was unable to use the product. I was attempting a stock repair using techniques that I was unfamiliar with, and I thought this product would fill the bill.
The product itself looks to be a pretty good one.
My problem was that I also bought the MAUSER Cross Bolt Wrench, thinking that it would work for this product. I found nothing in the catalogue that explained that this product requires a different tool.
Lesson learned. I recommend adding a comment in the catalog indicating what the correct tool would be for tightening it down, and that the MAUSER Cross Bolt Wrench is intended for MAUSER Cross Bolts ONLY.
Upgrade your rifle with the TALLEY MAGNUM CROSSBOLT ⚙️. Designed for heavy magnums, it ensures optimal recoil distribution and fits perfectly!
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.