Help and contact
(0) Basket
Newsletter
Home
Shooting Accessories
Holsters & Belt Gear
Holster Accessories
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTERS
Support
TRUE NORTH CONCEPTS
MODULAR HOLSTER ADAPTERS
109.9
119.9
2
GBP
Product no.: 100040991
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER BLACK
Mfr Part: MHA01 850005392941 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER BLACK
Mfr Part: MHA01 850005392941 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
Specs:
Color: Black
Product no.: 100040992
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER EARTH BROWN
Mfr Part: MHA02 850005392958 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER EARTH BROWN
Mfr Part: MHA02 850005392958 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
Specs:
Color: Earth Brown
Upgrade your gear with the Modular Holster Adapter from True North Concepts! 🚀 Enjoy a secure fit and versatile mounting options for your holster.
In stock
£33.90
£33.90 - £35.90
In stock
£38.90
£38.90 - £39.90
Classical view
Mobile view