Help and contact
(0) Basket
Newsletter
Home
Handgun Parts
Trigger Group Parts
Performance Enhancing Kits
HARRISON DESIGN & CONSULTING CONCEALED CARRY IGNITION SET FOR 1911 HANDGUNS
Support
HARRISON DESIGN & CONSULTING
CONCEALED CARRY IGNITION SET FOR 1911 HANDGUNS
214.9
214.9
2
GBP
Product no.: 100011767
HARRISON DESIGN & CONSULTING CONCEALED CARRY IGNITION SET SILVER
Mfr Part: HD-134 Harrison Design ignition sets are manufactured from top grade tool steel to provide precise fit and reliable, consistent function under the most demanding conditions. Each part is wire EDM'd and CNC machined for a precise +/- .0005" tolerance, heat treated to Rc 53 - 56, then honed and mirror polished to give Extreme Service in your pistol. The hammers are slightly narrowed to avoid unwanted contact with the slide or ejector. They have deep serrations to help you keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion. The Concealed Carry hammer with its "teardrop-shaped" hammer hole has a rowel section (the rounded area with the serrations) that is slightly smaller to the rear and to the underside, making it work correctly and look good on pistols using a beavertail with a reduced-size "tail". It solves contact interference problems between the hammer and beavertail with the Wilson Combat "Carry" beavertail as well as Springfield beavertails that were paired with their "Delta" hammer. The tool steel sear is shaped to minimize excess material, reducing weight. The sear nose features a polished primary angle and breakaway angle. Fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer. While Harrison Design and Consulting don't care to use the term "drop-in" and all that it implies, many folks use these parts that way with satisfactory results as contact surfaces are pre-prepped.
HARRISON DESIGN & CONSULTING CONCEALED CARRY IGNITION SET SILVER
Mfr Part: HD-134 Harrison Design ignition sets are manufactured from top grade tool steel to provide precise fit and reliable, consistent function under the most demanding conditions. Each part is wire EDM'd and CNC machined for a precise +/- .0005" tolerance, heat treated to Rc 53 - 56, then honed and mirror polished to give Extreme Service in your pistol. The hammers are slightly narrowed to avoid unwanted contact with the slide or ejector. They have deep serrations to help you keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion. The Concealed Carry hammer with its "teardrop-shaped" hammer hole has a rowel section (the rounded area with the serrations) that is slightly smaller to the rear and to the underside, making it work correctly and look good on pistols using a beavertail with a reduced-size "tail". It solves contact interference problems between the hammer and beavertail with the Wilson Combat "Carry" beavertail as well as Springfield beavertails that were paired with their "Delta" hammer. The tool steel sear is shaped to minimize excess material, reducing weight. The sear nose features a polished primary angle and breakaway angle. Fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer. While Harrison Design and Consulting don't care to use the term "drop-in" and all that it implies, many folks use these parts that way with satisfactory results as contact surfaces are pre-prepped.
Top takeaways
- Harrison Design ignition sets are crafted from high-grade tool steel with precise tolerances and heat-treated for durability and reliable function in 1911 handguns.
- The Concealed Carry hammer is designed to minimize snagging and interference with beavertail grips, featuring a teardrop-shaped hole and narrowed, polished surfaces.
- While not labeled as "drop-in," many users install these ignition parts directly with satisfactory results, thanks to pre-prepped contact surfaces for smooth operation.
Attributes
Delivery weight: 0.068kg Shipping width: 76mm Shipping length: 152mm
Item details
Made in USA
US export classification: 0A501.c
US export classification: 0A501.c
Product no.: 100011768
HARRISON DESIGN & CONSULTING CONCEALED CARRY IGNITION SET BLACK
Mfr Part: HD-134-B Harrison Design ignition sets are manufactured from top grade tool steel to provide precise fit and reliable, consistent function under the most demanding conditions. Each part is wire EDM'd and CNC machined for a precise +/- .0005" tolerance, heat treated to Rc 53 - 56, then honed and mirror polished to give Extreme Service in your pistol. The hammers are slightly narrowed to avoid unwanted contact with the slide or ejector. They have deep serrations to help you keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion. The Concealed Carry hammer with its "teardrop-shaped" hammer hole has a rowel section (the rounded area with the serrations) that is slightly smaller to the rear and to the underside, making it work correctly and look good on pistols using a beavertail with a reduced-size "tail". It solves contact interference problems between the hammer and beavertail with the Wilson Combat "Carry" beavertail as well as Springfield beavertails that were paired with their "Delta" hammer. The tool steel sear is shaped to minimize excess material, reducing weight. The sear nose features a polished primary angle and breakaway angle. Fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer. While Harrison Design and Consulting don't care to use the term "drop-in" and all that it implies, many folks use these parts that way with satisfactory results as contact surfaces are pre-prepped.
HARRISON DESIGN & CONSULTING CONCEALED CARRY IGNITION SET BLACK
Mfr Part: HD-134-B Harrison Design ignition sets are manufactured from top grade tool steel to provide precise fit and reliable, consistent function under the most demanding conditions. Each part is wire EDM'd and CNC machined for a precise +/- .0005" tolerance, heat treated to Rc 53 - 56, then honed and mirror polished to give Extreme Service in your pistol. The hammers are slightly narrowed to avoid unwanted contact with the slide or ejector. They have deep serrations to help you keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion. The Concealed Carry hammer with its "teardrop-shaped" hammer hole has a rowel section (the rounded area with the serrations) that is slightly smaller to the rear and to the underside, making it work correctly and look good on pistols using a beavertail with a reduced-size "tail". It solves contact interference problems between the hammer and beavertail with the Wilson Combat "Carry" beavertail as well as Springfield beavertails that were paired with their "Delta" hammer. The tool steel sear is shaped to minimize excess material, reducing weight. The sear nose features a polished primary angle and breakaway angle. Fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer. While Harrison Design and Consulting don't care to use the term "drop-in" and all that it implies, many folks use these parts that way with satisfactory results as contact surfaces are pre-prepped.
Upgrade your 1911 handgun with the Harrison Design Concealed Carry Ignition Set. ⚙️ Precision-engineered for reliability and performance!
Classical view
Mobile view