Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
More...
Customer ratings for RCBS X-DIE 2-DIE SET .223 REM
Number of ratings: 2
From brownells.com: 2
Average rating: 5
They work as advertised !(11/06/2016)
I've used RCBS X-Dies in .308 Win and .223 Rem since they were first introduced; have loaded many 1,000s of rounds with them. These are exceptional in my Dillon progressive press. When still shooting competitive high-power, I used a single stage press and hand-trimmed every match case - but for practice / plinking ammo, the X-Die is all I use in these two high-volume calibers. They REALLY do work well.
Major time saver for hi-volume reloading(11/06/2016)
I've used RCBS X-Dies in .223 Rem and .308 Win since they were first introduced; have loaded many 1,000s of rounds with them. These are exceptional in my Dillon 650B progressive press. When still shooting competitive high-power, I still used a single stage press and hand-trimmed every case - but for practice / plinking ammo - the X-Die is all I use in these two high-volume calibers. They REALLY do work well.
Product no.: 749014004 RCBS X-DIE 2-DIE SET .223 REM Mfr Part: 37212076683372123 Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
The RCBS X-Die 2-Die Set for .223 Rem requires a one-time trim of the case, after which no further trimming is needed.
The X-Die features a patented mandrel that reduces the growth rate of the case, stabilizing it below the maximum length without thickening the case neck.
Using the X-Die results in consistent case length, maintaining accuracy and extending case life without repeated trimming.
Attributes
Cartridge:
223 Remington
Die Style:
Full Length Sizing Dies
Delivery weight: 0.533kgShipping height: 44mmShipping width: 114mmShipping length: 152mm
UPC
: 076683372123
Item details
Made in USA
Product no.: 749014017 RCBS X-DIE 2-DIE SET .308 WIN Mfr Part: 37812076683378125 Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
The X-Die eliminates the need for repeated case trimming after an initial trim of .020” off the maximum case length.
The mandrel in the X-Die reduces the growth rate of the case, stabilizing it below the maximum length with no loss of accuracy.
Cases sized in the X-Die do not thicken at the neck wall, leading to extended case life and consistent sizing.
Attributes
Cartridge:
308 Winchester
Die Style:
Full Length Sizing Dies
Delivery weight: 0.558kgShipping height: 41mmShipping width: 114mmShipping length: 152mm
UPC
: 076683378125
Item details
Made in USA
Product no.: 749014015 RCBS X-DIE 2-DIE SET .30-06 SPRINGFIELD Mfr Part: 37712076683377128 Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
The X-Die set includes a Full Length Sizer Die with a specially designed mandrel to eliminate the need for repeated case trimming after an initial trim.
After initial trimming of .020” off the maximum case length, the X-Die's mandrel reduces the growth rate of the case, stabilizing it below the maximum length without affecting accuracy or case life.
Designed for the .30-06 Springfield cartridge, the X-Die ensures that the neck wall of the case does not thicken, maintaining consistent case length during resizing.
Attributes
Cartridge:
30-06 Springfield
Die Style:
Full Length Sizing Dies
Delivery weight: 0.615kgShipping height: 44mmShipping width: 114mmShipping length: 152mm
UPC
: 076683377128
Item details
Made in USA
Experience precision with the RCBS X-FULL LENGTH DIE SET for .223 REM. 🎯 Trim once and never again! Perfect for consistent case sizing.
Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
More...
Customer ratings for RCBS X-DIE 2-DIE SET .223 REM
Number of ratings: 2
From brownells.com: 2
Average rating: 5
They work as advertised !(11/06/2016)
I've used RCBS X-Dies in .308 Win and .223 Rem since they were first introduced; have loaded many 1,000s of rounds with them. These are exceptional in my Dillon progressive press. When still shooting competitive high-power, I used a single stage press and hand-trimmed every match case - but for practice / plinking ammo, the X-Die is all I use in these two high-volume calibers. They REALLY do work well.
Major time saver for hi-volume reloading(11/06/2016)
I've used RCBS X-Dies in .223 Rem and .308 Win since they were first introduced; have loaded many 1,000s of rounds with them. These are exceptional in my Dillon 650B progressive press. When still shooting competitive high-power, I still used a single stage press and hand-trimmed every case - but for practice / plinking ammo - the X-Die is all I use in these two high-volume calibers. They REALLY do work well.