Help and contact
United Kingdom
(0) Basket
Newsletter
REARDEN MANUFACTURING GROUP LLC
R2 FLASH HIDER
104.9
109.9
4
GBP
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111391_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111389_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111390_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111392_1_xs.jpg "#TheName[html]")
New
Product no.: 430111391
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 13.5X1LH THREADS TAPER SHOULDER BLACK NITRIDE
Mfr Part: 10106 850035804940 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 13.5X1LH THREADS TAPER SHOULDER BLACK NITRIDE
Mfr Part: 10106 850035804940 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
109.9
GBP
0
£109.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 375 Caliber (.375)
Finish: Black
Material: Stainless Steel
Threads: M13.5x1LH
New
Product no.: 430111389
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 1/2-28 THREADS SQUARE SHOULDER BLACK NITRIDE
Mfr Part: 10083 850035804827 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 1/2-28 THREADS SQUARE SHOULDER BLACK NITRIDE
Mfr Part: 10083 850035804827 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
104.9
GBP
9
£104.90
*
Is a 'Call to order' product.
Delivery time approx. 7-14 days.
9 pcs. in the USA warehouse
9 pcs. in the USA warehouse
Specs:
Caliber: 375 Caliber (.375)
Finish: Black
Material: Stainless Steel
Threads: 1/2-28
New
Product no.: 430111390
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 5/8-24 THREADS SQUARE SHOULDER BLACK NITRIDE
Mfr Part: 10100 850035804889 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 5/8-24 THREADS SQUARE SHOULDER BLACK NITRIDE
Mfr Part: 10100 850035804889 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
104.9
GBP
15
£104.90
*
Is a 'Call to order' product.
Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse
More than 10 pieces in USA warehouse
Specs:
Caliber: 375 Caliber (.375)
Finish: Black
Material: Stainless Steel
Threads: 5/8-24
New
Product no.: 430111392
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 14X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10112 850041491004 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2 FLASH HIDER 14X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10112 850041491004 R2 FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
109.9
GBP
0
£109.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 375 Caliber (.375)
Finish: Black
Material: Stainless Steel
Threads: M14x1LH
Why order from us?
Classical view
Mobile view