Help and contact
United Kingdom
(0) Basket
Newsletter
Home
Rifle Parts
Muzzle Devices
Flash Hiders
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER
Support
REARDEN MANUFACTURING GROUP LLC
R2S FLASH HIDER
94.9
119.9
13
GBP
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111396_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111395_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111397_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111398_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111401_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111399_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111400_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111407_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111402_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111403_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111404_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111405_1_xs.jpg "#TheName[html]")
![#TheName[html]](/WebRoot/MediaDefinition/userdocs/skus/l_430111406_1_xs.jpg "#TheName[html]")
New
Product no.: 430111396
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10103 850035804919 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10103 850035804919 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 5/8-24
New
Product no.: 430111395
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10086 850035804858 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10086 850035804858 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
94.9
GBP
0
£94.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 1/2-28
New
Product no.: 430111397
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13.5X1 LH THREADS TAPER SHOULDER BLACK
Mfr Part: 10109 850035804971 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13.5X1 LH THREADS TAPER SHOULDER BLACK
Mfr Part: 10109 850035804971 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M13.5x1LH
New
Product no.: 430111398
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 14X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10115 850041491035 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 14X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10115 850041491035 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M14x1LH
New
Product no.: 430111401
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER M18X1.5 THREADS TAPER SHOULDER BLACK
Mfr Part: 10124 850041491233 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER M18X1.5 THREADS TAPER SHOULDER BLACK
Mfr Part: 10124 850041491233 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
119.9
GBP
2
£119.90
*
Is a 'Call to order' product.
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
2 pcs. in the USA warehouse
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M18X1.5mm
New
Product no.: 430111399
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS TAPER SHOULDER BLACK
Mfr Part: 10130 850041491295 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS TAPER SHOULDER BLACK
Mfr Part: 10130 850041491295 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 1/2-28
New
Product no.: 430111400
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS TAPER SHOULDER BLACK
Mfr Part: 10131 850041491301 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS TAPER SHOULDER BLACK
Mfr Part: 10131 850041491301 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 5/8-24
New
Product no.: 430111407
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER SR25 THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10159 850041491585 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER SR25 THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10159 850041491585 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
119.9
GBP
0
£119.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: SR25
New
Product no.: 430111402
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 15X1 RH THREADS TAPER SHOULDER BLACK
Mfr Part: 10187 850041491868 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 15X1 RH THREADS TAPER SHOULDER BLACK
Mfr Part: 10187 850041491868 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M15x1
New
Product no.: 430111403
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-36 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10189 850041491882 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-36 THREADS SQUARE SHOULDER BLACK
Mfr Part: 10189 850041491882 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 1/2-36
New
Product no.: 430111404
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10191 850041491905 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10191 850041491905 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M13x1LH
New
Product no.: 430111405
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 9/16X24 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10193 850041491929 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 9/16X24 LH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10193 850041491929 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: 9/16-24
New
Product no.: 430111406
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 RH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10195 850041491943 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 RH THREADS FACEMOUNT SHOULDER BLACK
Mfr Part: 10195 850041491943 R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
99.9
GBP
0
£99.90
*
Is a 'Call to order' product.
Out of stock. No ETA.
Specs:
Caliber: 40 Caliber
Finish: Black
Material: Stainless Steel
Threads: M13x1RH
Why order from us?
Classical view
Mobile view