Forward Cant Helps You Zero Your Scope for Extended Ranges
Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope. The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available. Bore height dimension is .31" The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
More...
Customer ratings for BADGER ORDNANCE REMINGTON 700 SA SCOPE RAIL 30 MOA LEFT HAND
Number of ratings: 4
From brownells.com: 4
Average rating: 3.8
Works as it should(14/10/2009)
Install was easy, allows for easy installation of scope onto a Rem 700.
As solid as a one piece mount can be(01/12/2011)
Having used many other bases before, it is easy to see why the B.O. base were picked for U.S. military us. Actually, not only can you see the quality, you can feel it. The coating, even on the bottom, is uniform in color and thickness. It is heavy-duty and will outlast the rifle that it is on. It doesn't come with installation instruction, but the manufacturers website has a nice PDF download with tightening instructions and torque specs. Match up with BO rings for the ultimate scope mount setup.
good mount, too expensive...(16/09/2012)
Excellent mount but one can obtain equal quality using a Brownell brand mount for half the cost..One accurate mount is as good as another and I feel we are paying for the name here...But some just have to do so as I have done before...Steel works good for the tip of type as it won't wear the mount but aluminum is great for the weight savings with a permanent mount ring that won't be removed...I gave it a 3 because of the rediculously high price for this mount....
Not what I thought(07/08/2013)
The fit was a little sloppy and had to grind the front two screws to stay out of the bolt lugs and barrel threads also did not like the groove down the center of it after all. It appears to be made from good material. But had a bow in the center when putting a straight edge on it, for the money thought it would be better.
Product no.: 093000123 BADGER ORDNANCE REMINGTON 700 SA SCOPE RAIL 30 MOA LEFT HAND Mfr Part: 30646L Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope. The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available. Bore height dimension is .31" The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
The Badger Ordnance Remington 700 SA Scope Rail features a forward angle bias of 30 MOA for long-range shooting without exceeding scope elevation.
It is constructed from heavy-duty steel with a MIL-STD 1913 Picatinny slot pattern for compatibility with tactical scope rings.
The scope rail includes an integral recoil lug to prevent movement, even with high-recoil cartridges, and is designed specifically for the Remington 700 short action.
Attributes
Action Type:
Short
Colour:
Matte Black
Elevation:
30 MOA
Make:
Remington
Material:
Steel
Model:
700
Number of Bases:
1-Piece
Style:
Picatinny
Delivery weight: 0.181kgShipping height: 25mmShipping width: 25mmShipping length: 171mm
Item details
Made in USA
Product no.: 093000070 BADGER ORDNANCE REMINGTON 700 SHORT ACTION 20 MOA RIGHT HAND RAIL (8-40) Mfr Part: 306-06-8 Heavy steel base with 20 M.O.A. forward angle increases maximum scope elevation for long range shooting. Machined after hardening to maintain dimensions. Integral recoil lug withstands the hardest kicking calibers. Uses MIL-STD 1913 Picatinny slot pattern for maximum sight mounting possibilities. Remington Zero Cant does not have 20 M.O.A. forward angle. For use where extra elevation is not required. Fits 700 short action only.
Product no.: 093000071 BADGER ORDNANCE REMINGTON 700 SHORT ACTION 20 MOA RIGHT HAND ALUMINUM Mfr Part: 30606A Heavy steel base with 20 M.O.A. forward angle increases maximum scope elevation for long range shooting. Machined after hardening to maintain dimensions. Integral recoil lug withstands the hardest kicking calibers. Uses MIL-STD 1913 Picatinny slot pattern for maximum sight mounting possibilities. Remington Zero Cant does not have 20 M.O.A. forward angle. For use where extra elevation is not required. Fits 700 short action only.
Product no.: 093000072 BADGER ORDNANCE REMINGTIN 700 SHORT ACTION 30 MOA RIGHT HAND RAIL Mfr Part: 30646 Heavy steel base with 20 M.O.A. forward angle increases maximum scope elevation for long range shooting. Machined after hardening to maintain dimensions. Integral recoil lug withstands the hardest kicking calibers. Uses MIL-STD 1913 Picatinny slot pattern for maximum sight mounting possibilities. Remington Zero Cant does not have 20 M.O.A. forward angle. For use where extra elevation is not required. Fits 700 short action only.
Product no.: 093000124 BADGER ORDNANCE REMINGTON 700 SA SCOPE RAIL 20 MOA LEFT HAND Mfr Part: 306-06L Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope. The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available. Bore height dimension is .31" The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
Product no.: 093000012 BADGER ORDNANCE REMINGTON 700 SHORT ACTION 0 MOA RIGHT HAND RAIL Mfr Part: 30606F Heavy steel base with 20 M.O.A. forward angle increases maximum scope elevation for long range shooting. Machined after hardening to maintain dimensions. Integral recoil lug withstands the hardest kicking calibers. Uses MIL-STD 1913 Picatinny slot pattern for maximum sight mounting possibilities. Remington Zero Cant does not have 20 M.O.A. forward angle. For use where extra elevation is not required. Fits 700 short action only.
Product no.: 093000125 BADGER ORDNANCE REMINGTON 700 SHORT ACTION 45 MOA LEFT HAND RAIL Mfr Part: 30656L Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope. The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available. Bore height dimension is .31" The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
Forward Cant Helps You Zero Your Scope for Extended Ranges
Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope. The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available. Bore height dimension is .31" The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
More...
Customer ratings for BADGER ORDNANCE REMINGTON 700 SA SCOPE RAIL 30 MOA LEFT HAND
Number of ratings: 4
From brownells.com: 4
Average rating: 3.8
Works as it should(14/10/2009)
Install was easy, allows for easy installation of scope onto a Rem 700.
As solid as a one piece mount can be(01/12/2011)
Having used many other bases before, it is easy to see why the B.O. base were picked for U.S. military us. Actually, not only can you see the quality, you can feel it. The coating, even on the bottom, is uniform in color and thickness. It is heavy-duty and will outlast the rifle that it is on. It doesn't come with installation instruction, but the manufacturers website has a nice PDF download with tightening instructions and torque specs. Match up with BO rings for the ultimate scope mount setup.
good mount, too expensive...(16/09/2012)
Excellent mount but one can obtain equal quality using a Brownell brand mount for half the cost..One accurate mount is as good as another and I feel we are paying for the name here...But some just have to do so as I have done before...Steel works good for the tip of type as it won't wear the mount but aluminum is great for the weight savings with a permanent mount ring that won't be removed...I gave it a 3 because of the rediculously high price for this mount....
Not what I thought(07/08/2013)
The fit was a little sloppy and had to grind the front two screws to stay out of the bolt lugs and barrel threads also did not like the groove down the center of it after all. It appears to be made from good material. But had a bow in the center when putting a straight edge on it, for the money thought it would be better.