Tells Instantly If Barrel & Cylinder Are In Perfect Alignment-Match & Service Grade Available
Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
SPECS: 10½” (26.7cm) long handle. 2½” (6.3cm) long heads made of steel hardened to Rc 52-54. Includes instructions. Heads interchange on handle except .17 Cal. Range Rod Handle fits only the .17 Cal. Range Rod Head. Combo includes Handle, one (1) Head and Instructions. Master Kit contains one (1) .22 to .45 Cal. Range Rod Handle and one (1) .17 Cal. Range Rod Handle, plus one (1) each of following heads: .17 Cal., .22LR, K-22, .22 Magnum, .32-20, .32 S&W/H&R Magnum, .38/.357 Match, .38/.357 Service, .41 Magnum, .44/40, .44/.44 Magnum, .45 ACP/.45 Colt in a fitted Storage Box. Match Kit has one (1) Handle, six Heads (all except the .38/.357 Service and K-22 Heads) in a fitted Storage Box. Add-On Kit includes one (1) .17 Cal. Range Rod Handle, plus one each of following heads: .17 Cal., K-22, .22 Magnum, .32-20, .38/.357 Service, .44/40, plus pre-cut foam to accommodate all items in existing Range Rod Match Kit box. See chart for Head only and Combo Stock #’s.
More...
Customer ratings for BROWNELLS REVOLVER RANGE ROD MASTER KIT
Number of ratings: 3
From brownells.com: 3
Average rating: 1
Not Pleased(30/09/2016)
I purchased this 17 cal. range rod for my Truaus 17 HMR revolver and it is useless it won't even start to enter the barrel. Would not order again! NOT A HAPPY CAMPER.
Will not fit in the barrell (19/07/2016)
Will not fit in the barrel of my single action army
Not Happy(30/09/2016)
I purchased this range rod a while back to use at a later date. When I got it out to use it, it was useless. It would not even start in my Taurus 22/22 mag. revolver. I would not order again. NOT HAPPY!!!
Product no.: 080616005 BROWNELLS REVOLVER RANGE ROD MASTER KIT050806108691 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
The REVOLVER RANGE RODS by BROWNELLS are designed to check revolver barrel and cylinder alignment, and identify issues with the cylinder crane or yoke.
The kit includes a handle with interchangeable heads for different calibers, with specific heads for match and service guns, as well as a special head for the S&W K-22.
The Master Kit contains a comprehensive set of tools for calibers ranging from .17 to .45, while the Match Kit and Add-On Kit offer tailored selections for professional inspections and accuracy jobs.
Product no.: 080617045 BROWNELLS RREVOLVER RANGE OD COMBO FOR .45 AUTO/45 COLT050806019430 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080617213 BROWNELLS REVOLVER RANGE ROD COMBO FOR S&W K-22050806019454 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618032 BROWNELLS REVOLVER RANGE ROD HEAD FOR .32 S&W & H&R MAGNUM050806019515 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
32.9GBP24£32.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 080618038 BROWNELLS REVOLVER RANGE ROD HEAD FOR .38/357 SERVICE050806019522 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618041 BROWNELLS REVOLVER RANGE ROD HEAD FOR .41 MAGNUM050806019539 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618001 BROWNELLS REVOLVER RANGE ROD HEAD FOR .22 MAGNUM050806019461 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080617001 BROWNELLS REVOLVER RANGE ROD COMBO FOR .22 MAGNUM050806019348 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618002 BROWNELLS REVOLVER RANGE ROD HEAD FOR .32-20050806019478 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080617002 BROWNELLS REVOLVER RANGE ROD COMBO FOR .32-20050806019355 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618003 BROWNELLS REVOLVER RANGE ROD HEAD FOR .44/40050806019485 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080617003 BROWNELLS REVOLVER RANGE ROD COMBO FOR .44/40050806019362 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080618017 BROWNELLS REVOLVER RANGE ROD HEAD FOR .17 CAL.050806019492 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080616000 BROWNELLS RANGE ROD MATCH KIT050806019300 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080617017 BROWNELLS REVOLVER RANGE ROD COMBO FOR .17 CALIBER050806019379 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080616004 BROWNELLS REVOLVER RANGE ROD ADD-ON PACK050806019331 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Product no.: 080619001 BROWNELLS REVOLVER RANGE ROD HANDLE 17 CALIBER050806019591 Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
Tells Instantly If Barrel & Cylinder Are In Perfect Alignment-Match & Service Grade Available
Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore.
SPECS: 10½” (26.7cm) long handle. 2½” (6.3cm) long heads made of steel hardened to Rc 52-54. Includes instructions. Heads interchange on handle except .17 Cal. Range Rod Handle fits only the .17 Cal. Range Rod Head. Combo includes Handle, one (1) Head and Instructions. Master Kit contains one (1) .22 to .45 Cal. Range Rod Handle and one (1) .17 Cal. Range Rod Handle, plus one (1) each of following heads: .17 Cal., .22LR, K-22, .22 Magnum, .32-20, .32 S&W/H&R Magnum, .38/.357 Match, .38/.357 Service, .41 Magnum, .44/40, .44/.44 Magnum, .45 ACP/.45 Colt in a fitted Storage Box. Match Kit has one (1) Handle, six Heads (all except the .38/.357 Service and K-22 Heads) in a fitted Storage Box. Add-On Kit includes one (1) .17 Cal. Range Rod Handle, plus one each of following heads: .17 Cal., K-22, .22 Magnum, .32-20, .38/.357 Service, .44/40, plus pre-cut foam to accommodate all items in existing Range Rod Match Kit box. See chart for Head only and Combo Stock #’s.
More...
Customer ratings for BROWNELLS REVOLVER RANGE ROD MASTER KIT
Number of ratings: 3
From brownells.com: 3
Average rating: 1
Not Pleased(30/09/2016)
I purchased this 17 cal. range rod for my Truaus 17 HMR revolver and it is useless it won't even start to enter the barrel. Would not order again! NOT A HAPPY CAMPER.
Will not fit in the barrell (19/07/2016)
Will not fit in the barrel of my single action army
Not Happy(30/09/2016)
I purchased this range rod a while back to use at a later date. When I got it out to use it, it was useless. It would not even start in my Taurus 22/22 mag. revolver. I would not order again. NOT HAPPY!!!