M-LOK Type 2 Rail Covers are low-profile, two-piece covers that can be mounted in any direction on M-LOK compatible systems, featuring a textured surface for additional grip.
The covers include a beveled contour to reduce snagging and have a pre-scored locking tab for easy customization and color mixing.
Each pack contains six panels, each designed to cover one M-LOK slot, and are made of polymer in a gray color to fit AR-15 style handguards.
Designed for M-LOK compatible handguards, the MAGPUL rail allows attachment of 1913 Picatinny spec accessories.
Made from a reinforced polymer, offering strength and lightweight with beveled ends to prevent snagging.
Comes in various lengths with the 5-slot version being 2.375 inches and includes all necessary hardware for easy installation.
The MDT M-LOK Baker Wings are designed to enhance stability and control for shooting from unstable positions and when using a front bag.
They are compatible with any M-LOK chassis or stock and specifically fit MDT ACC, ESS, TAC21, and LSS-XL Gen2 chassis, as well as precision AR-10/15 forends.
Each wing is 229 mm long, adds approximately 2 inches in width to the forend, and is made from 6061-T6 aluminum, weighing 0.84 lbs.
The MDT M-Lok Arca Swiss Rail is designed for attaching MDT Chassis rifles to ARCA interfaces on tripods and support gear.
This rail is available in both a standard flat profile for general M-LOK surfaces and an angled profile to match the MDT LSS-XL Gen2 underside.
Constructed from aluminum with a Mil-spec Type III hard-black anodization, the rail is durable and available in multiple lengths.
The MAGPUL AR-15 Direct Thread XTM Handstop Kit is a lightweight, low-profile weapon control accessory.
The kit includes four pieces: Hand Stop, Index Panel, Full XTM Enhanced Panel, and XTM Enhanced Half Panel.
Available in three colors: Black, Flat Dark Earth, and OD Green, made of polymer material for the AR-15.
The M-LOK Hand Stop Kit is designed for improved weapon control and can be used as a forward stop to prevent hand contact with hot areas.
Kit includes a hand stop, index panel, rail cover, and an adapter for use with Magpul M-LOK handguards or wider profile rails.
Constructed from polymer, the kit is lightweight, low-profile, and comes in black, specifically tailored for AR-15 style rifles.
M-LOK Type 1 Rail Covers are designed for M-LOK systems, providing a low-profile, lightweight, and heat-resistant option with an enhanced grip.
These O.D. Green rubber rail covers are 9.5 inches long, covering six M-LOK slots, and can be trimmed for custom length or color combinations.
Manufactured by MAGPUL, the rail covers come in a set of two panels, fitting AR-15 style firearms.
Constructed from 6061 aluminum with a hard coat anodized finish, ensuring durability and a lifetime of service.
Designed as a one-piece Picatinny scope rail, it is 5.0 inches long and includes mounting screws for easy installation.
100% Made in the U.S.A., this top rail fits Marlin 1894 models and is compatible with Henry 38/357, 44 Mag, and 45 Colt receivers, carrying a lifetime warranty.
Easy to install top rail for HK MP5 that allows mounting of optics and accessories, with all necessary tools included.
Constructed of 6061 aluminum with a hard coat anodized finish, ensuring durability and a lifetime of service.
Designed and manufactured in the USA, the rail is 922R Compliant and comes with a lifetime warranty from Midwest Industries.
Bravo Company's BCM M-LOK Rail Panels are designed to cover unused M-LOK slots, enhancing grip and comfort.
The panels are made from a flexible, cuttable polymer and are bi-directional for easy installation.
They are ventilated for cooling, fit BCM MCMR handguards, and come in a 5-pack with a black or flat dark earth color option.
The MDT Arca Swiss Rail is made from Mil-spec Type III hard-black anodized aluminum.
It is designed with a flat profile for infinite adjustment and is compatible with Magpul MOE hole spacing.
It fits various MDT chassis and stocks, including LSS, HS3, TAC21, LSS-22, and the discontinued LSS-XL.
The MDT Control Bridge is designed for the ACC Elite chassis and attaches to the forend for mirage mitigation and recoil control.
It is made from 6061 T6 Aluminum with a Cerakote finish for durability.
The product comes in black, matching the aesthetic of the ACC Elite chassis.
The Area 419 Fixed Barricade is a non-moveable stop designed for 12” Arcalock and MPA rails, providing a stable rear barricade.
It includes a 3/32 wrench for installation, features a grooved surface for grip, and is machined from 6061-T6 Aluminum with a Type III Black Hardcoat Anodized finish.
The barricade uses a pinch clamp and set screw for secure attachment, preventing slippage by engaging with the ARCALOCK cuts.
The Strike Industries M-LOK Covers are easy to install, offer versatile placement, and protect the handguard from impact and scratches.
Made from hardened nylon polymer, these covers provide excellent grip due to their aggressive texturing and absorb shocks to prevent damage.
The package includes five black rail covers that fit all M-LOK mounting surfaces and are designed to be ultra-slim and non-reflective.
The Brigand Arms M-LOK Aluminum Backing Plate is designed to attach accessories to AR-15s without adding significant weight.
It is compatible with the lightweight Brigand Arms carbon-fiber handguard and negates the need for heavy Picatinny rails.
The backing plate is lightweight at only 0.26 ounce and comes with the necessary screws and a hex wrench for installation.
Compatible with all M-LOK systems, the rail sections allow for the attachment of 1913 Picatinny accessories.
Available in both aluminum and polymer, with aluminum being Mil-Spec anodized for durability.
Designed with beveled ends to prevent snagging and sharp edges, and comes with necessary hardware for installation.
The Area 419 Arcalock 14" Universal Dovetail Rail features a proprietary clamp design with 65 locking positions for a secure mechanical lock, preventing any movement.
It is compatible with standard Arca accessories and follows the RRS 1.5" Dovetail Standard, ensuring lever clamps fit properly.
Constructed from durable 6061-T6 Aluminum with a Type 3 Hard Coat anodized finish, the rail can be attached at up to 4 points on various rifle and stock configurations for enhanced stability.
The MAGPUL Ladder Rail Panel is a flexible, ladder-style polymer cover that snaps onto Picatinny rails to protect against damage and improve grip.
It is made from Santoprene thermoplastic elastomer, offering a slip-resistant surface, and can cover 18 slots or be trimmed for custom lengths.
Designed for the AR-15 with a length of 7 inches, the panel is easy to install and remove, enhancing weapon control without increasing handguard diameter.
The AR-15 KeyMod Rail Panel Kit by Bravo Company is designed to fit all KeyMod mounting surfaces with seven consecutive slots and has a non-slip, non-reflective surface.
Each kit includes five rubber rail panels that can be trimmed to any desired length, offering customization to the user's needs.
These panels are made in the USA from high-strength polymer, featuring an ultra-slim, rounded octagonal profile for a comfortable grip and are ventilated for cooling.