Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
More...
35.941.97GBP
Product no.: 430101690 SPIRITUS SYSTEMS LID SNAKE ANVIS - MULTICAM TROPIC Mfr Part: AC-LS-AN-MT Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
The Spiritus Systems Lid Snake is designed for secure and easy management of night vision device cables, preventing damage and disconnection.
It offers a two-piece, flexible set that fits unique helmet configurations, specifically for helmets with ANVIS battery packs or other straight connectors.
Made in the USA, this product provides abrasion protection for battery pack cables and is not compatible with 90 degree connectors.
Product no.: 430101679 SPIRITUS SYSTEMS LID SNAKE ANVIS - BLACK Mfr Part: AC-LS-AN-BK Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Product no.: 430101685 SPIRITUS SYSTEMS LID SNAKE ANVIS - MULTICAM BLACK Mfr Part: AC-LS-AN-MB Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Product no.: 430101683 SPIRITUS SYSTEMS LID SNAKE ANVIS - MULTICAM ARID Mfr Part: AC-LS-AN-MA Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Product no.: 430101688 SPIRITUS SYSTEMS LID SNAKE ANVIS - MULTICAM Mfr Part: ACLSANMC Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Product no.: 430101681 SPIRITUS SYSTEMS LID SNAKE ANVIS - COYOTE BROWN Mfr Part: AC-LS-AN-CB Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Product no.: 430101692 SPIRITUS SYSTEMS LID SNAKE ANVIS - RANGER GREEN Mfr Part: AC-LS-AN-RG Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA
Lid Snake ANVIS The Spiritus Systems Lid Snake was designed for anybody using night vision devices that require a battery pack and safe, quick, donning and doffing. The wires connecting your battery pack are delicate and can easily become damaged or disconnected from your helmet. The are two traditional approaches to mitigate this problem. 1) Run tape along the entire length of your cable to secure it to your helmet. The problem with this is that you cannot easily remove your batter pack from your helmet for airborne operations or maintenance. 2) Run the cable underneath your helmet between your pads. This option allows your battery pack to be removed quickly but creates a dangerous scenario where the cable cannot disconnect in the event that your battery pack or nods become tangled with another object. The Lid Snake eliminates these problems while also providing abrasion protection for your battery pack cable. This two-piece, flexible set accommodates unique helmet configurations, and are sized to be used as a single piece for flight helmets. For use with ANVIS battery packs or other battery packs with straight connectors. 90 Degree connectors will not fit! Note: This product may be shown with optional accessories. Made in the USA