Machined As A Matched, Serial-Numbered Pair For Precise Alignment
Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
SPECS: Rings Body: Aluminum, hardcoat anodized, matte black. Crossbolts/Nuts/Cap Screws Chrome-moly steel, blued. Height from top of base to inside bottom of ring: .400" (10.1mm). Fits scopes with 30mm O.D. tubes. Mounts to MIL-STD 1913 Picatinny bases. Inserts Machined polymer, black.
More...
Customer ratings for EGW 30MM TACTICAL RINGS .990" HIGH
Number of ratings: 1
From brownells.com: 1
Average rating: 5
HIGH QUALITY SCOPE RINGS(20/07/2015)
I have a pair of these rings on every one of my rifles. They are sturdy and machined to exacting tolerances. I have never had any of them come loose.
I love the fact that they are machined as a pair, just like the bearing caps are machined and trued on an engine crankshaft - to ensure perfect alignment.
EGW - when you demand perfection in your shot placement.
Product no.: 296000109 EGW 30MM TACTICAL RINGS .990" HIGH Mfr Part: 61101841370107476 Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
Product no.: 296000110 EGW INSERTS FOR 1" SCOPES, 1 PAIR Mfr Part: 60106841370107407 Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
EGW's Tactical Scope Rings are precision machined from aluminum billet, with matched pairs for optimal alignment, and include polymer inserts for 1" scope compatibility.
Features include a hard anodized, matte black finish for durability, beveled edges to prevent snagging, and heat-treated chrome-moly steel crossbolts and nuts.
Designed for use with MIL-STD 1913 Picatinny bases, these rings fit 30mm O.D. scope tubes and have a height of .400" from the top of the base to the inside bottom of the ring.
Product no.: 296000261 EGW 30MM TACTICAL RINGS .850 HIGH Mfr Part: 61100841370107452 Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
Machined As A Matched, Serial-Numbered Pair For Precise Alignment
Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
SPECS: Rings Body: Aluminum, hardcoat anodized, matte black. Crossbolts/Nuts/Cap Screws Chrome-moly steel, blued. Height from top of base to inside bottom of ring: .400" (10.1mm). Fits scopes with 30mm O.D. tubes. Mounts to MIL-STD 1913 Picatinny bases. Inserts Machined polymer, black.
More...
Customer ratings for EGW 30MM TACTICAL RINGS .990" HIGH
Number of ratings: 1
From brownells.com: 1
Average rating: 5
HIGH QUALITY SCOPE RINGS(20/07/2015)
I have a pair of these rings on every one of my rifles. They are sturdy and machined to exacting tolerances. I have never had any of them come loose.
I love the fact that they are machined as a pair, just like the bearing caps are machined and trued on an engine crankshaft - to ensure perfect alignment.
EGW - when you demand perfection in your shot placement.