Help and contact
(0) Basket
Newsletter
Home
Shooting Accessories
Slings & Sling Swivels
Slings
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING
Support
BLUE FORCE GEAR
VICKERS 2-TO-1 RED SWIVEL SLING
144.9
164.9
9
GBP
Product no.: 100019657
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING-COYOTE
Mfr Part: 2TO1-RED-125-AA 814520019936 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING-COYOTE
Mfr Part: 2TO1-RED-125-AA 814520019936 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Coyote
Material: Nylon
Style: 1-point Sling, 2-point Sling
Width: 1-1/4''
Product no.: 100019658
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING-BLACK
Mfr Part: 2TO1-RED-200-AA 814520019950 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING-BLACK
Mfr Part: 2TO1-RED-200-AA 814520019950 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Black
Material: Nylon
Style: 1-point Sling, 2-point Sling
Width: 1-1/4''
Product no.: 100019659
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING-COYOTE
Mfr Part: VCAS-2TO1-RED-2 814520019981 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING-COYOTE
Mfr Part: VCAS-2TO1-RED-2 814520019981 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Coyote
Material: Nylon
Style: 1-point Sling, 2-point Sling
Width: 1-1/4''
Product no.: 100019656
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING-BLACK
Mfr Part: VCAS-2TO1-RED-1 814520019912 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING-BLACK
Mfr Part: VCAS-2TO1-RED-1 814520019912 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Black
Material: Nylon
Style: 1-point Sling, 2-point Sling
Width: 1-1/4''
Product no.: 430100704
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING MULTICAM
Mfr Part: VCAS-2TO1-PB-20 812114020139 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING MULTICAM
Mfr Part: VCAS-2TO1-PB-20 812114020139 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Multi-Cam
Material: Nylon
Style: 2-point Sling
Width: 2''
Product no.: 430100701
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING MULTICAM
Mfr Part: VCAS-2TO1-RED-1 814520019943 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING MULTICAM
Mfr Part: VCAS-2TO1-RED-1 814520019943 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Multi-Cam
Material: Nylon
Style: 2-point Sling
Width: 1.25''
Product no.: 430100703
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING WOLF GRAY
Mfr Part: VCAS-2TO1-RED-1 812114021792 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING WOLF GRAY
Mfr Part: VCAS-2TO1-RED-1 812114021792 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: Gray
Material: Nylon
Style: 2-point Sling
Width: 1.25''
Product no.: 430100705
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING OD GREEN
Mfr Part: VCAS-2TO1-PB-20 812114020122 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS PADDED 2-TO-1 RED SWIVEL SLING OD GREEN
Mfr Part: VCAS-2TO1-PB-20 812114020122 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: O.D. Green
Material: Nylon
Style: 2-point Sling
Width: 2''
Product no.: 430100702
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING OD GREEN
Mfr Part: VCAS-2TO1-RED-1 814520019967 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
BLUE FORCE GEAR VICKERS 2-TO-1 RED SWIVEL SLING OD GREEN
Mfr Part: VCAS-2TO1-RED-1 814520019967 While 2-point slings are ideal for most situations, there are times, like deploying from a vehicle or fighting in complex structures, when a 1-point sling has a clear advantage. Combining Blue Force Gear’s new polymer Burnsed Socket and patented RED Swivel, the Vickers 221 Sling allows users to switch from 2-point to 1-point mode instantly by pulling on the RED Swivel knob and reinserting it in to the Burnsed Socket at the rear of the receiver. The instantaneous adjustability of the sling is still maintained in both 1 and 2 point modes. Constructed similar to the world’s standard Vickers Combat Applications Sling™, a RED™ Swivel is sewn to the front of the sling towards the muzzle. A standard push button swivel and new molded Burnsed Socket are woven onto the rear allowing full adjustability of the sling for use with or without body armor. The 221™ Sling fits any weapon with two QD sling swivel sockets with the rear socket towards the end of the receiver. For SCARS, Sigs, HKs, or other weapon systems with eyelets at the rear of the receiver, a Universal Wire Loop with Push Button Socket can be added instead of the included push button socket. Sling Build: 1.25" sling webbing 2.00" tubular webbing with closed cell foam padding for padded models Invista solution dyed CORDURA® webbing ITW GhilleTex™ Acetal hardware - a military grade, low IR plastic RED™ Swivel Build: Machined steel, phosphated for maximum corrosion resistance Nylon coated, double crimped directly to 7 strand stainless steel aircraft cable Textured sphero-conical shaped pull knob Stainless Steel internals
Specs:
Color: O.D. Green
Material: Nylon
Style: 2-point Sling
Width: 1.25''
Experience versatility with the Vickers 2-1 Sling! 🔄 Switch effortlessly between 1-point and 2-point modes for any mission or situation.
Classical view
Mobile view