Help and contact
(0) Basket
Newsletter
AREA 419
ZERO M-SERIES SIZING DIES
539.9
559.9
9
GBP
Product no.: 430107254
AREA 419 ZERO M-SERIES 6MM CREEDMOR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6S 810080181588 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6MM CREEDMOR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6S 810080181588 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6.5 Creedmoor
Die Style: Sizing Dies
Product no.: 430107257
AREA 419 ZERO M-SERIES .300 PRC SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M30 810080182042 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES .300 PRC SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M30 810080182042 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 300 PRC
Die Style: Sizing Dies
Product no.: 430107259
AREA 419 ZERO M-SERIES 6.5X47MM LAPUA SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080181984 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6.5X47MM LAPUA SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080181984 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6.5 x 47 mm Lapua
Die Style: Sizing Dies
Product no.: 430107258
AREA 419 ZERO M-SERIES 6.5MM PRC SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080182011 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6.5MM PRC SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080182011 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6.5 PRC
Die Style: Sizing Dies
Product no.: 430107252
AREA 419 ZERO M-SERIES 6MM BR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6B 810080181557 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6MM BR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6B 810080181557 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6 mm BR
Die Style: Sizing Dies
Product no.: 430107251
AREA 419 ZERO M-SERIES 6MM DASHER SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6D 810080181526 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6MM DASHER SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6D 810080181526 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6 mm Dasher
Die Style: Sizing Dies
Product no.: 430107253
AREA 419 ZERO M-SERIES 6MM GT SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6G 810080181670 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6MM GT SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M6G 810080181670 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6 GT
Die Style: Sizing Dies
Product no.: 430107256
AREA 419 ZERO M-SERIES .308 WINCHESTER SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M30 810080181649 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES .308 WINCHESTER SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M30 810080181649 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 308 Winchester
Die Style: Sizing Dies
Product no.: 430107255
AREA 419 ZERO M-SERIES 6.5MM CREEDMOR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080181618 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
AREA 419 ZERO M-SERIES 6.5MM CREEDMOR SIZING DIE W/ZERO SHELL HOLDER
Mfr Part: 419-ZERODIE-M65 810080181618 The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries. As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis. With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders. Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die. KEY FEATURES Micrometer Adjustable Headspace/Shoulder Bump Precision Ground Expander Mandrels (all dies ship with a .002 neck tension mandrel, or add more increments with Area 419’s MANDREL KIT) Full-Length Neck to Extractor Sizing Spring Ejection for Spent Primers Replaceable Steel Decap Pins Reamer Cut to Exacting Dimensions for a TRUE Size (no more sticky bolt after the second firing) Hydraulic Shoulder Pressure Relief 100% Made in AMERICA All dies ship with an Area 419 ZERO Die Ring, a spare decapping pin and necessary install/removal tools. After testing them all, and finding everything Area 419 like and didn’t like, and working with thousands of customers and a variety of industry partners, they believe this is what a sizing die should be. Area 419 think you’ll agree. NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.
Specs:
Cartridge: 6.5 Creedmoor
Die Style: Sizing Dies
Discover the ZERO M-Series Sizing Die for 6.5 Creedmoor! 🎯 Achieve match-grade precision with user-friendly design from Area 419.
Classical view
Mobile view