Your basket is empty.

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

BROWNELLS
ACRAGLAS RELEASE AGENT

050806105522 081007004

Description
Ratings (7)

Our traditional Release Agent and our new, easy-to-ship, Non-Flammable Release Agent selectively lets Acraglas bond to the stock but not to the barreled action. Both products present nearly indentical physical characteristics, and are applied in exactly the same manner with no noticeable difference in dry time. Both form a smooth, vinyl-like coating between the bedding compound and metal. Non-Flammable Release Agent is a non-flammable, non-hazardous formula that can be transported by air, immediately upon request, safely and legally within and outside the Continental U. S., so there’s no more waiting for ground shipments to arrive when you need an Acraglas kit or extra release agent in a hurry.

More...

Customer ratings for BROWNELLS ACRAGLAS NON-FLAMMABLE RELEASE AGENT 3OZ BOTTLE

Number of ratings: 7
From brownells.com: 7
Average rating: 1.4

Release agent (22/01/2012)

Works very well. One coat usually is sufficient if you are careful to let it dry completely. Drying can be speeded up with a hair dryer. Cleans up easly.

Works only on rough finishes (20/04/2012)

After using the stanard release agent for 16 years, thought I would try this instead. HUGE and costly mistake. It will only level on rough finishes, any polished or coated finish on the firearm and it simply beads up. I have throughly degreased all parts prior to coating still no luck. It also takes significantly longer to dry. However, on the up side, no stuck actions. So, it does do what it's designed for, but at the cost of time and extra effort. I'll just stick to what has worked for forever.

warning - disapointed (11/10/2012)

when ordering my last bedding shop kit I did not notice clicking on the non-flammable release agent. That was a mistake. I was never able to get an even coat. It took a hair dryer to get it dry -- and, it still may not have been dry enough. The next morning I was forced to freeze and heat to get the stock off. The bedding surface was rough and looked like the release agent had pooled up under pressure (perhaps not fully dry). Moreover, acraglas was sticking to several places on the metal. I felt lucky to be able to grind the bedding out and start again; it could have been worse. I have bedded scores of stocks using the flammable release agent with good results.

Not worth the $$$$ (06/06/2016)

I don't know why Brownells thinks it's a good idea to change products when things are not broken. This stuff does NOT flow evenly regardless what steps are used. Time to use the 007Wb formula again.

try regular acraglas release agent (05/03/2012)

Does not release devcon well at all. Can't say for acraglas, but am not happy at all. Had to heat the part enough to destroy the devcon epoxy. Regular acraglas release agent works great, but not this stuff! Absolutely not recommended.

NOT the same (14/03/2016)

This version of the release agent was described as virtually the same as the flammable version. Not so. We pre-cleaned the action and taped barrel with lacquer thinner and found this product to bead up, not providing complete coverage. Before attempting to bed a customer's wood stock we contacted customer service. They advised we re-clean everything with acetone as lacquer thinner can leave a film. We did as advised and the beading was even worse (see attached photos).

Brownells is awesome though and we've got a replacement container of the original flammable release agent being shipped in this one's place.

I don't know if this was a faulty batch or if this is a consistent problem, but if you aren't strapped for time and are in the US, you should just buy the original version.

JUNK (10/07/2016)

I gave it one star, because they don't have 0. This stuff is a waste of time and money. Bottle says put on 2 coats, well you better put on 3 or 4 if you want it to release. Put it on heavy and wet to get the best release. I will NEVER buy another bottle. -- JUNK !!!!

Read 7 more ratings on brownells.com

15.9 59.9 2 GBP

Product no.: 081007004
BROWNELLS ACRAGLAS NON-FLAMMABLE RELEASE AGENT 3OZ BOTTLE
Mfr Part: 60910 050806105522 Our traditional Release Agent and our new, easy-to-ship, Non-Flammable Release Agent selectively lets Acraglas bond to the stock but not to the barreled action. Both products present nearly indentical physical characteristics, and are applied in exactly the same manner with no noticeable difference in dry time. Both form a smooth, vinyl-like coating between the bedding compound and metal. Non-Flammable Release Agent is a non-flammable, non-hazardous formula that can be transported by air, immediately upon request, safely and legally within and outside the Continental U. S., so there’s no more waiting for ground shipments to arrive when you need an Acraglas kit or extra release agent in a hurry.

15.9 GBP 102 £15.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Both the traditional and non-flammable release agents allow Acraglas to bond with the stock but not the barreled action, and are applied in the same way.
The non-flammable release agent is safe for air transport, ensuring quick delivery within and outside the Continental U.S.
Both release agents create a smooth, vinyl-like coating between the bedding compound and metal, with no significant difference in dry time.

Attributes

Delivery weight: 0.136kg Shipping height: 84mm Shipping width: 30mm Shipping length: 41mm UPC : 050806105522

Item details

Made in USA

Product no.: 081007033
BROWNELLS ACRAGLAS NON-FLAMMABLE RELEASE AGENT 1 QUART BOTTLE
Mfr Part: 60910-032 050806105515 Our traditional Release Agent and our new, easy-to-ship, Non-Flammable Release Agent selectively lets Acraglas bond to the stock but not to the barreled action. Both products present nearly indentical physical characteristics, and are applied in exactly the same manner with no noticeable difference in dry time. Both form a smooth, vinyl-like coating between the bedding compound and metal. Non-Flammable Release Agent is a non-flammable, non-hazardous formula that can be transported by air, immediately upon request, safely and legally within and outside the Continental U. S., so there’s no more waiting for ground shipments to arrive when you need an Acraglas kit or extra release agent in a hurry.

59.9 GBP 0 £59.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Discover the ACRAGLAS Release Agent by Brownells! ✈️ Non-flammable and safe for air transport, perfect for your Acraglas bonding needs.

Description
Ratings (7)

More...

Customer ratings for BROWNELLS ACRAGLAS NON-FLAMMABLE RELEASE AGENT 3OZ BOTTLE

Number of ratings: 7
From brownells.com: 7
Average rating: 1.4

Release agent (22/01/2012)

Works very well. One coat usually is sufficient if you are careful to let it dry completely. Drying can be speeded up with a hair dryer. Cleans up easly.

Works only on rough finishes (20/04/2012)

warning - disapointed (11/10/2012)

Not worth the $$$$ (06/06/2016)

I don't know why Brownells thinks it's a good idea to change products when things are not broken. This stuff does NOT flow evenly regardless what steps are used. Time to use the 007Wb formula again.

try regular acraglas release agent (05/03/2012)