Use To Align Parts, Start Pins, Assembly/Dissambly
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
SPECS: Handle - Plastic. Shank - Unhardened steel drill rod, or 360 alloy brass . 3¼” (8.2cm) long. OAL - 4¾” (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092” (2.3mm), .120” (3mm), .151” (3.8mm), and .246” (6.2mm). Bench Block - Delrin, tan. 63⁄8” (16cm) long, 3” (7.6cm) wide, ¾” (1.9cm) high. Holds 8 punches.
More...
Customer ratings for BROWNELLS SET OF FOUR STEEL PUNCHES
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Handy Set(19/06/2012)
This is a great set and the block makes a nice place to store them on your bench. They are not made to be hammered, but you could lightly tap them with a nylon hammer without damage. The set I bought included steel and brass.
Brownells push pin set(08/06/2017)
I like the brass pin pushers but the steel pin pushers are very soft and will bend easily if you need to align parts.
A Must Have(17/04/2010)
These are great for installing triggers on AR'S. These Brass alignment punches should be on the bench of every gunsmith or hobbyist.
Product no.: 080000034 BROWNELLS SET OF FOUR STEEL PUNCHES050806005105 For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
The ALIGNMENT & PUSH PUNCHES SET includes four steel punches designed for easy alignment and disassembly of gun parts, particularly for AR-15, 1911 Auto, Remington 870, and Ruger Revolvers.
Each punch features a slightly undersized shank with a slight taper near the end, ensuring a snug fit without binding, enhancing control for aligning holes and starting pins.
The set comes with a Delrin bench block for convenient storage and organization, ensuring the eight punches (four brass and four steel in various sizes) are always readily accessible.
Use To Align Parts, Start Pins, Assembly/Dissambly
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
SPECS: Handle - Plastic. Shank - Unhardened steel drill rod, or 360 alloy brass . 3¼” (8.2cm) long. OAL - 4¾” (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092” (2.3mm), .120” (3mm), .151” (3.8mm), and .246” (6.2mm). Bench Block - Delrin, tan. 63⁄8” (16cm) long, 3” (7.6cm) wide, ¾” (1.9cm) high. Holds 8 punches.
More...
Customer ratings for BROWNELLS SET OF FOUR STEEL PUNCHES
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Handy Set(19/06/2012)
This is a great set and the block makes a nice place to store them on your bench. They are not made to be hammered, but you could lightly tap them with a nylon hammer without damage. The set I bought included steel and brass.
Brownells push pin set(08/06/2017)
I like the brass pin pushers but the steel pin pushers are very soft and will bend easily if you need to align parts.
A Must Have(17/04/2010)
These are great for installing triggers on AR'S. These Brass alignment punches should be on the bench of every gunsmith or hobbyist.