Help and contact
(0) Basket
Newsletter
HIPERFIRE
AR-15 EDT® SERIES TRIGGER ASSEMBLIES
139.9
139.9
3
GBP
Product no.: 100029408
HIPERFIRE AR-15/10 EDT® SHARP SHOOTER TRIGGER ASSEMBLY
Mfr Part: EDTSS 859177004379 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
HIPERFIRE AR-15/10 EDT® SHARP SHOOTER TRIGGER ASSEMBLY
Mfr Part: EDTSS 859177004379 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
Specs:
Make: AR-15
Style: Single-Stage
Top takeaways
- Hiperfire's EDT triggers enhance AR-15s with a single-stage pull and maintain "mil-spec" reliability, offering medium pull weights of 4.5 or 5.5 lbs with two interchangeable hammer springs.
- The triggers provide a smooth pull profile with a clean break, short over-travel, and fast reset, while ensuring hard primer strikes with preserved mil-spec hammer energy.
- Available in four configurations, the EDT trigger series includes options for different use-cases and preferences, such as the Sharp Shooter, Heavy Gunner, Designated Marksman, and Enhanced Duty models.
Attributes
Make: AR-15 Style: Single-Stage Delivery weight: 0.1kg Shipping height: 19mm Shipping width: 102mm Shipping length: 171mm UPC : 859177004379
Item details
Made in USA
US export classification: 0A501.c
US export classification: 0A501.c
Product no.: 100029410
HIPERFIRE AR-15/10 EDT® DESIGNATED MARKSMAN TRIGGER ASSEMBLY
Mfr Part: EDTDM 859177004393 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
HIPERFIRE AR-15/10 EDT® DESIGNATED MARKSMAN TRIGGER ASSEMBLY
Mfr Part: EDTDM 859177004393 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
Specs:
Make: AR-15
Style: Single-Stage
Product no.: 100029409
HIPERFIRE AR-15/10 EDT® HEAVY GUNNER TRIGGER ASSEMBLY
Mfr Part: EDTHG 859177004386 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
HIPERFIRE AR-15/10 EDT® HEAVY GUNNER TRIGGER ASSEMBLY
Mfr Part: EDTHG 859177004386 Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger. Single-stage with minimal creep 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight SwingFast Hammer Head™ gives unusually fast locktime Extra-power hammer spring for positive hammer strikes without increasing pull weight Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes. The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe. Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.
Specs:
Make: AR-15
Style: Single-Stage
Upgrade your AR-15 with the HIPERFIRE EDT® Sharp Shooter Trigger Assembly for a smooth, reliable pull. ✨ Enjoy precision and performance!
In stock
£249.90
£229.90 - £259.90
In stock
£54.90
£54.90 - £64.90
In stock
- Is a 'Call to order' product.
£59.90
Classical view
Mobile view