Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Receiver Parts
Receiver Hardware
Receiver Pins
FORWARD CONTROLS DESIGN AR-15 TAKEDOWN PINS STAINLESS STEEL 5.56MM
Support
FORWARD CONTROLS DESIGN
AR-15 TAKEDOWN PINS STAINLESS STEEL 5.56MM
49.9
74.9
2
GBP
Product no.: 100044420
FORWARD CONTROLS DESIGN AR-15 TAKEDOWN PINS .040 EXTRA LENGTH BLK 5.56MM
Mfr Part: PF-040 (PINS FO 680665827107 PF-040 (Pins, Forward Controls, 0.040) is a set of elegantly simple, and superbly crafted AR15/M16 pivot and take down pins. Machined from 17-4 PH SS bar stock and QPQ finished, these pins are 0.040 longer than TDP spec pivot and take down pins. PF-040 pins can be aptly described as "reverse extended", in that they're longer on the left side of the receiver, the additional length of the take down pin doesn't interfere with ambidextrous safety operation. When PF-040 pins are pushed in from the left side, the +0.040 transforms to extra length and grasping area on the right side pin head, which combined with their silky smoothness, makes pulling the pin a cinch. PF-040 has the same elegant and unadorned pin heads design that is in line with our design philosophy which prioritizes functionality over aesthetics. PF-040 right side pin heads (when installed on a receiver, with the muzzle pointing away) are flat, with a small 45 degree chamfer. There is a small dimple on the left pin head, and the tip of bullets (up to 9mm) can be used to push the pins in on tight fitting receivers. AR-15/M16 17-4 QPQ treated pivot and take down pin 0.040 extra length NOTE: PF-040 may not work "PDW" stocks that have bars overlapping the take down pin holes.
FORWARD CONTROLS DESIGN AR-15 TAKEDOWN PINS .040 EXTRA LENGTH BLK 5.56MM
Mfr Part: PF-040 (PINS FO 680665827107 PF-040 (Pins, Forward Controls, 0.040) is a set of elegantly simple, and superbly crafted AR15/M16 pivot and take down pins. Machined from 17-4 PH SS bar stock and QPQ finished, these pins are 0.040 longer than TDP spec pivot and take down pins. PF-040 pins can be aptly described as "reverse extended", in that they're longer on the left side of the receiver, the additional length of the take down pin doesn't interfere with ambidextrous safety operation. When PF-040 pins are pushed in from the left side, the +0.040 transforms to extra length and grasping area on the right side pin head, which combined with their silky smoothness, makes pulling the pin a cinch. PF-040 has the same elegant and unadorned pin heads design that is in line with our design philosophy which prioritizes functionality over aesthetics. PF-040 right side pin heads (when installed on a receiver, with the muzzle pointing away) are flat, with a small 45 degree chamfer. There is a small dimple on the left pin head, and the tip of bullets (up to 9mm) can be used to push the pins in on tight fitting receivers. AR-15/M16 17-4 QPQ treated pivot and take down pin 0.040 extra length NOTE: PF-040 may not work "PDW" stocks that have bars overlapping the take down pin holes.
Specs:
Make: AR-15
Product no.: 430103567
FORWARD CONTROLS DESIGN AR-15 TAKE DOWN PINS
Mfr Part: HF-601 697566711077 PF-040 (Pins, Forward Controls, 0.040) is a set of elegantly simple, and superbly crafted AR15/M16 pivot and take down pins. Machined from 17-4 PH SS bar stock and QPQ finished, these pins are 0.040 longer than TDP spec pivot and take down pins. PF-040 pins can be aptly described as "reverse extended", in that they're longer on the left side of the receiver, the additional length of the take down pin doesn't interfere with ambidextrous safety operation. When PF-040 pins are pushed in from the left side, the +0.040 transforms to extra length and grasping area on the right side pin head, which combined with their silky smoothness, makes pulling the pin a cinch. PF-040 has the same elegant and unadorned pin heads design that is in line with our design philosophy which prioritizes functionality over aesthetics. PF-040 right side pin heads (when installed on a receiver, with the muzzle pointing away) are flat, with a small 45 degree chamfer. There is a small dimple on the left pin head, and the tip of bullets (up to 9mm) can be used to push the pins in on tight fitting receivers. AR-15/M16 17-4 QPQ treated pivot and take down pin 0.040 extra length NOTE: PF-040 may not work "PDW" stocks that have bars overlapping the take down pin holes.
FORWARD CONTROLS DESIGN AR-15 TAKE DOWN PINS
Mfr Part: HF-601 697566711077 PF-040 (Pins, Forward Controls, 0.040) is a set of elegantly simple, and superbly crafted AR15/M16 pivot and take down pins. Machined from 17-4 PH SS bar stock and QPQ finished, these pins are 0.040 longer than TDP spec pivot and take down pins. PF-040 pins can be aptly described as "reverse extended", in that they're longer on the left side of the receiver, the additional length of the take down pin doesn't interfere with ambidextrous safety operation. When PF-040 pins are pushed in from the left side, the +0.040 transforms to extra length and grasping area on the right side pin head, which combined with their silky smoothness, makes pulling the pin a cinch. PF-040 has the same elegant and unadorned pin heads design that is in line with our design philosophy which prioritizes functionality over aesthetics. PF-040 right side pin heads (when installed on a receiver, with the muzzle pointing away) are flat, with a small 45 degree chamfer. There is a small dimple on the left pin head, and the tip of bullets (up to 9mm) can be used to push the pins in on tight fitting receivers. AR-15/M16 17-4 QPQ treated pivot and take down pin 0.040 extra length NOTE: PF-040 may not work "PDW" stocks that have bars overlapping the take down pin holes.
Specs:
Make: AR-15
Upgrade your AR-15 with PF-040 Takedown Pins! 🔧 Crafted from stainless steel for durability and enhanced performance.
Classical view
Mobile view