Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
More...
Customer ratings for REDDING #4 COMPETITION SHELLHOLDER SET
Number of ratings: 4
From brownells.com: 4
Average rating: 3.3
Make cartridge headspace easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Cartridge headspace made easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Cartridge headspace made easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Useless Waste of Money(26/01/2017)
Following the directions, and using with a Redding press and die, I was unable to bump identical brass with any consistency whatsoever. I did not find this product useful at all, and it's grossly overpriced for a set of shell holders. Should be about $20 even if they are useful to you. I love made in the USA, and Redding is a good company, but I returned this product.
Product no.: 749005614 REDDING #4 COMPETITION SHELLHOLDER SET Mfr Part: 11604611760116049 Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Product no.: 749005621 REDDING #6 COMPETITION SHELLHOLDER SET Mfr Part: 11606611760116063 Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Specs:Cartridge: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 257 Weatherby Magnum, 6.5 mm Remington Magnum, 270 Weatherby Magnum, 25 WSSM (Winchester Super Short Mag), 6.5 STWStyle: Press Type
Product no.: 749005630 REDDING #1 COMPETITION SHELLHOLDER SET Mfr Part: 11601611760116018 Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Product no.: 749005489 REDDING #7 COMPETITION SHELLHOLDER SET Mfr Part: 11607611760116070 Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Product no.: 749012664 REDDING #35 COMPETITION SHELLHOLDER SET Mfr Part: 11635611760116353 Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
More...
Customer ratings for REDDING #4 COMPETITION SHELLHOLDER SET
Number of ratings: 4
From brownells.com: 4
Average rating: 3.3
Make cartridge headspace easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Cartridge headspace made easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Cartridge headspace made easy(25/12/2010)
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Useless Waste of Money(26/01/2017)
Following the directions, and using with a Redding press and die, I was unable to bump identical brass with any consistency whatsoever. I did not find this product useful at all, and it's grossly overpriced for a set of shell holders. Should be about $20 even if they are useful to you. I love made in the USA, and Redding is a good company, but I returned this product.