Made from the finest materials for strength and durability. High carbon, steel bodies; chrome silicon music wire springs take a "set" and then resist gradual weaking over time. Followers and mag pads are injection molded from unbreakable polymer to stand up to rough treatment without cracking.
SPECS: Body - Steel, blued. Spring - Chrome silicon. Follower - Nylon polymer.
More...
Customer ratings for PRO MAG CZ 75 9MM, 15 RDS
Number of ratings: 7
From brownells.com: 7
Average rating: 2.1
Do Not Buy(23/05/2011)
This is the second Pro mag I have bought and neither one of them worked right. I bought a Pro Mag for my p220 and the action will not lock back when the gun goes to battery. I recently bought one for my CZ-75 (because of availibility) and it is not a quality product. For one, the follower was in upside down when I took it out of the package and two the mag will only hold seven rounds before the follower sticks. I will never own a Pro-Mag again. Do not waist your money. (CZ-75 go with Mec-Gar for replacements, no problems.)
Poor Fit and Problematic(25/03/2012)
I purchased a 15 rund Pro Mag magazine for my CZ 75 about six months ago because they were on sale. The magazine wold not fit into my frame without force and then became stuck in the frame. I have since sanded, flied, flexed, stoned, and reblued the magazine body so it fits and functions well enough for range use however it will not drop free and must be pulled out using the baseplate. Spend the extra money and buy the MecGar.
Worthless Garbage(28/03/2012)
Rarely have I been so disappointed in a product. Brownells has a no prifanity policy otherwise this review would be rated NC-17. I purchased this for my CZ75, perhaps it works with some other pistol. Mag external dimensions are so far off spec that it jams in the mag well. The follower is poorly made and jams and is subect to tipping when loading. The base pads are poorly made and don't fit well. The slidelock cut out is on the wrong side! The springs seem to be ok.
excellent(01/08/2012)
This product is excellent for my Bul Cherokee Compact, this gun, is a Clone Between the CZ 75 & TZ 75, i recommend this product!!
Does the job!(21/04/2013)
Tested this magazine in a Canik-55 (cz75-B clone) and the magazine worked fine. The magazine inserted, and seated no problem, cycled all 15 rounds without any malfunctions, and held the slide back. The magazine does drop freely as well.
Mec-far magazines are much nicer, but these work as well. I'm not a fan of the thick floor plate on these though, but that is cosmetic.
Does not work for my CZ75 and CZ85 (14/09/2016)
Does not work in Czechoslovakia made CZ-75 and CZ-85 weapons I purchased in the 1980's while stationed in West Germany. I wish they did work as these magazines are hard to find.The magazines would not fit completely in the magazine well and jammed when attempting to insert the magazine.
Malfunctions too much(10/10/2018)
I bought this for the Canik SS 120, I own 3 mecgar magazines that function flawlessly, but I was curious about these. I've probably run about 250 rounds, I get too many malfuctions, constant stove pipes with this magazine, usual towards the last few rounds. If you rapid fire, you are guaranteed constant stove pipes. It does not drop freely either, you have to pull it out. Don't cheapen out, just buy the mecgars, they are much better.
Product no.: 687000018 PRO MAG CZ 75 9MM, 15 RDS Mfr Part: CZ-A1708279006333 Made from the finest materials for strength and durability. High carbon, steel bodies; chrome silicon music wire springs take a "set" and then resist gradual weaking over time. Followers and mag pads are injection molded from unbreakable polymer to stand up to rough treatment without cracking.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 687000102 PRO MAG CZ 75 MAGAZINE 9MM 32-RD Mfr Part: CZ-A3708279006616 Made from the finest materials for strength and durability. High carbon, steel bodies; chrome silicon music wire springs take a "set" and then resist gradual weaking over time. Followers and mag pads are injection molded from unbreakable polymer to stand up to rough treatment without cracking.
Made from the finest materials for strength and durability. High carbon, steel bodies; chrome silicon music wire springs take a "set" and then resist gradual weaking over time. Followers and mag pads are injection molded from unbreakable polymer to stand up to rough treatment without cracking.
SPECS: Body - Steel, blued. Spring - Chrome silicon. Follower - Nylon polymer.
More...
Customer ratings for PRO MAG CZ 75 9MM, 15 RDS
Number of ratings: 7
From brownells.com: 7
Average rating: 2.1
Do Not Buy(23/05/2011)
This is the second Pro mag I have bought and neither one of them worked right. I bought a Pro Mag for my p220 and the action will not lock back when the gun goes to battery. I recently bought one for my CZ-75 (because of availibility) and it is not a quality product. For one, the follower was in upside down when I took it out of the package and two the mag will only hold seven rounds before the follower sticks. I will never own a Pro-Mag again. Do not waist your money. (CZ-75 go with Mec-Gar for replacements, no problems.)
Poor Fit and Problematic(25/03/2012)
I purchased a 15 rund Pro Mag magazine for my CZ 75 about six months ago because they were on sale. The magazine wold not fit into my frame without force and then became stuck in the frame. I have since sanded, flied, flexed, stoned, and reblued the magazine body so it fits and functions well enough for range use however it will not drop free and must be pulled out using the baseplate. Spend the extra money and buy the MecGar.
Worthless Garbage(28/03/2012)
Rarely have I been so disappointed in a product. Brownells has a no prifanity policy otherwise this review would be rated NC-17. I purchased this for my CZ75, perhaps it works with some other pistol. Mag external dimensions are so far off spec that it jams in the mag well. The follower is poorly made and jams and is subect to tipping when loading. The base pads are poorly made and don't fit well. The slidelock cut out is on the wrong side! The springs seem to be ok.
excellent(01/08/2012)
This product is excellent for my Bul Cherokee Compact, this gun, is a Clone Between the CZ 75 & TZ 75, i recommend this product!!
Does the job!(21/04/2013)
Tested this magazine in a Canik-55 (cz75-B clone) and the magazine worked fine. The magazine inserted, and seated no problem, cycled all 15 rounds without any malfunctions, and held the slide back. The magazine does drop freely as well.
Mec-far magazines are much nicer, but these work as well. I'm not a fan of the thick floor plate on these though, but that is cosmetic.
Does not work for my CZ75 and CZ85 (14/09/2016)
Does not work in Czechoslovakia made CZ-75 and CZ-85 weapons I purchased in the 1980's while stationed in West Germany. I wish they did work as these magazines are hard to find.The magazines would not fit completely in the magazine well and jammed when attempting to insert the magazine.
Malfunctions too much(10/10/2018)
I bought this for the Canik SS 120, I own 3 mecgar magazines that function flawlessly, but I was curious about these. I've probably run about 250 rounds, I get too many malfuctions, constant stove pipes with this magazine, usual towards the last few rounds. If you rapid fire, you are guaranteed constant stove pipes. It does not drop freely either, you have to pull it out. Don't cheapen out, just buy the mecgars, they are much better.