Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Receiver Parts
Ejection Port Cover Parts
Ejection Port Covers
FORWARD CONTROLS DESIGN EJECTION PORT COVER WITH TWIN DIMPLE
Support
FORWARD CONTROLS DESIGN
EJECTION PORT COVER WITH TWIN DIMPLE
69.9
79.9
3
GBP
Product no.: 430103587
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, BLACK
Mfr Part: EPC 2D BLK 686162347889 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, BLACK
Mfr Part: EPC 2D BLK 686162347889 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
Specs:
Make: AR-15
Top takeaways
- The Ejection Port Cover is precision machined from 7075 aluminum, hard coat anodized, and based on TDP specs with added Forward Controls Design features.
- It includes twin dimples for tactile feedback and tabs for easier handling, improving the user experience during operation.
- Designed and manufactured in the USA, the EPC is compatible with TDP spec upper receivers but may require a few cycles to ease initial stiffness.
Attributes
Make: AR-15 Delivery weight: 0.34kg Shipping height: 13mm Shipping width: 102mm Shipping length: 165mm UPC : 686162347889
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Product no.: 430103589
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, ODG
Mfr Part: EPC 2D ODG 686162347988 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, ODG
Mfr Part: EPC 2D ODG 686162347988 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
Specs:
Make: AR-15
Product no.: 430103588
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, FDE
Mfr Part: EPC 2D FDE 686162347896 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
FORWARD CONTROLS DESIGN TDP SPEC EJECTION PORT COVER, TWIN DIMPLE, FDE
Mfr Part: EPC 2D FDE 686162347896 EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches. Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features they think many will find useful. EPC has two "tabs" flanking the cutout for the port cover spring. These tabs allow the EPC to rest on the upper at a greater angle when it's in the down/open position, which provides more space between the port cover and lower receiver. Their job is to better allow the user's finger to get underneath the port cover when he wishes to swing it up/close. Another feature is a shallow circular depression on the side of the EPC to provide texture tactile feedback to the user's finger when he's closing the EPC. A flat surface provides nothing to the user to differentiate one surface from another, it also provides no traction. A shallow circular depression on the left side of the EPC does both. Forward Controls Design incorporate flat surfaces with care as they have their uses . In this case, EPC's exterior surface is treated as a control surface, where a flat surface rarely makes sense. EPC is compatible with TDP spec upper receivers. Weight: 0.30oz. Material: 7075 Construction and coating: billet, type III anodized. Proudly designed and made in the USA. NOTE: Initial closing and opening of EPC may be stiff, this is normal, and will become easier with 2 or 3 closing/opening cycles. Proudly designed and made in the USA. NOTE: CSF does not ship with sling swivels. Please do not fully disassemble the CSF, you may not be able to reassemble it once it's taken apart.
Specs:
Make: AR-15
Upgrade your AR-15 with the Twin Dimple Ejection Port Cover! 🛠️ Crafted from 7075 aluminum, it's designed for optimal functionality and ease of use.
Classical view
Mobile view